119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extractor piñones 2.3/3.2 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 10.0x8.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 12.0x10.0x1000 mm
1 x Militarian pilot "Kamikaze" size 9cm (Slimline)
2 x 1/12 Pilot "Tom"
2 x Civilian pilot "G-Man" size 9cm (Slimline)
1 x 1/12 Pilot "Langley"
1 x 1/10 Pilot "Jimmy"
2 x 800TVL CMOS camera for FPV
2 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x Servo NARO Max Std
1 x 
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x CC 02
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
1 x Dean "T" - Futaba Adapter
2 x TrainerCord (master-learner)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Adapter lead MPX/EC3
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Circlick securite
1 x TP/TopFuel - XH 2/3S Adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x MPX-Dean "T" Adapter
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Set cintas unión paracaídas 145 cm
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x ABS tube 6.0x4.0x1000 mm
1 x Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm)
1 x Piloto JET 1:3,5
1 x Tarjeta programadora RAY G2
1 x 1/6 Pilot "John"
1 x Pilot "Adolf" Legends Series (Slimline)
1 x Tool for entel
1 x 1/7 Pilot "Japanese"
1 x 1/6 Pilot "Tony"
1 x 1/12 Pilot "Cougar"
1 x 1/4 Pilot "Mike"
1 x Pilot "Dick" Legends Series (Slimline)
1 x Civilian pilot "Joe" size 9cm (Slimline)
1 x Piloto jet 130 mm
1 x USB Mini Camera endoscope
1 x Conector XT-30 (hembra)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Connectors DEANS (T) micro
1 x XH female balance (9S) connector (2 pcs)
1 x Conector JR Servo male (10 pcs)
1 x XH male balance (7S) connector (2 pcs)
1 x Conector FUTABA Servo male (10 pcs)
1 x Connectors MPX 8 pins with support (black) 1 pair (male-female)
1 x Connectors MPX female
1 x Connectors MPX black male
1 x Connectors MPX male
1 x XH male balance (9S) connector (2 pcs)
1 x Conector male bateria 1s Kavan/Walkera 10cm cable
1 x Conector JR Servo male (10 pcs)
1 x Universal Colour Paste white 50 g
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Spray YELLOW Inca Lexan 150ml
1 x PARTALL® Hi-Temp Wax, 340 g
1 x SBEC 30 D
1 x Extension 5 lipos JST - JST/C
1 x SPARK Switch 7.4v
1 x Male connector for 12 pines AWG
1 x MPS Gas-Cap-Powerswitch
1 x Selfstart electronic switch
1 x Micro Switch button
1 x Connector Sub-D 2+5 Female
1 x SPS 70V 100/200 A
2,058.84EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies