Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Receptor CORE PBR-26XS 26ch
79.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Set cintas unión paracaídas 145 cm
2 x	Aramid 50 daN 50 m
2 x	Wing OXY 5,0 m2
1 x	Para-RC "RC-Evo-Cross" Rescue
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Parachute BACKUP X100
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Propeller Pleg CAM Carbon 20x12
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Llave dinamomterica 74 Z 0 0 21
1 x	Tray JETI for DS-14/16/24 Black
1 x	Screw-lock connector M2 (2 uds)
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Silent-blocks DLE 170M
3 x	Futaba Neckstrap
2 x	PIT (Aero-Naut)
1 x	Crimping sleeves for cable 1.3 mm (10 pcs)
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
2 x	Horn 6/35 with M3 Bearing
1 x	LUCAS pilot ARTF
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	One touch canopy lock
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	Cockpit plastic closing
1 x	6 mm blue aluminium threaded horn with patella
1 x	SUS wire 3m (nylon coated)
1 x	Small aluminium horn blue (2pcs)
1 x	Mono-Switch Memory FUTABA
1 x	Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x	Vest clothes Hispano Aviación
1 x	METEOR 1.000 mm kit
1 x	Crimping sleeves for cable 0.70 mm (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Windsock Ozone L -1200 mm
1 x	Steering arm 12 mm Ø 3 mm (2 uds)
1 x	Screw-lock pushrod conn snap Ø 1.5 mm (2 uds)
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
2 x	Antena FUTABA 35 mhZ 3PM/3FRF/4V/4Y/6EX/6X/6Y/7C
1 x	Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x	Covered closure or fairings
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Module 2.4GHz T-FHHS "F" Series
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	TopFuel LiPo 20C-ECO-X 5000mAh 4S MTAG
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	Motor Mega AC 16/10/03 RACE
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Futaba TM-24 "F" Series 2.4GHz T-FHSS Module
1 x	Neck strap JETI DS
1 x	Cable with accesories
1 x	Small aluminium horn gold (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Futaba BLS255/272/471SV - Gear Set
1 x	SPARK Switch 7.4v
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Futaba Radio Case
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Horn for flap control (1 pcs)
2 x	Antena FUTABA receptor Standard 2.4 GHz ( 160 mm aprox.)
1 x	Horn 5/20 with M2 Bearing
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Stainless steel cable Ø 0.5 mm (2 m)
1 x	Short adjustable control horn 3x24
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Adaptador USB - YGE
1 x	Futaba Multi-Switch 16 MODUL
1 x	FunCup XL RR
2 x	Futaba Aero Large Case - Internal Foam
1 x	FUNRAY RR
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	SERVO DES 568 MG
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Horn 20x28,5 mm (2 pcs)
1 x	Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x	FUTABA T10 J T-FHSS
1 x	Horn with ball 55x40
1 x	ABS tube 9.0x7.0x1000 mm
1 x	28x10 BIELA propeller
1 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ESC YGE 205 HVT BEC
1 x	Charger FUTABA SQN30W12P-08 220v
1 x	Brass control horn M2 short for wire (2 pcs)
2 x	Futaba FX36 2.4GHz FASST Test + R7008SB
2 x	Futaba F14 Twin Boat Stick
1 x	ABS tube 3.0x2.0x330 mm
2 x	Futaba Multi-Switch 16 DECODER
1 x	GPS, Vario and altitude Sensor SBS-01G
1 x	Switch moment button, 2 functions, long FUTABA
1 x	Parachute PV6 for F3J
1 x	Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Horn 6/27 with M3 Bearing
1 x	Windsock Ozone L - 700 mm
1 x	Softshell Hispano Aviación
1 x	Propeller RABOESCH M5 130 mm (4 Blades) (Right hydropropeller)
2 x	Futaba Multi-Switch-Prop 12+2 MODUL
2 x	Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x	Propeller Pleg CAM Carbon 20x10
1 x	Para-RC Trike "RC-Bullix"
1 x	Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Pipa 3D BULL MØ1 2.600mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Futaba Multi-Switch-Prop 12+2 DECODER
1 x	6 mm red aluminium threaded horn with patella
1 x	Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS)
1 x	MAX pilot ARTF
2 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	Wing OXY 0,5 pulgadas2
1 x	Festo 6mm Tubing Holder (10 uds)
1 x	Cable control set
2 x	FUTABA F14 + R168DF + Servo S148
1 x	ABS tube 14.0x10.0x1000 mm
1 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	Canopy Lock V1 M3 Blue (2 pcs)
1 x	Birch plywood plate 600x300x2.0 mm
1 x	20 mm carbon horn
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	RH long aluminium horn (2pcs)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Big-Malibu XL Roof box with surfboard rack GREY
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Motor DLE 170 M- Paramotors
1 x	SC NAVY V15R
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
1 x	Horn 16,5x20 mm (2 pcs)
1 x	Parachute P4
2 x	Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ
1 x	Micro clevis 0.8 mm(10 uds)
1 x	Motor OS 3820-1200 electric
1 x	IKURA GPS 4.28 m
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Motor DLE 430 cc - Paramotors
1 x	Paramotor Trike XL
1 x	Hovercraft sailcloth
1 x	Steering arm 16 mm Ø 3 mm
1 x	Central piece 42 mm 0º [12 mm]
1 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Small Crow DLE-170M
2 x
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Electric spoiler 250 mm (2 pcs)
1 x	ABS tube 8.0x7.0x1000 mm
2 x	Futaba 32MZ 2.4GHz + R7108SB
1 x	Horn 5/10 with M2 Bearing
1 x	SERVO DES 806 Pignons
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	Futaba S-Bus Rx/Gyro Link Lead
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Trike XL motor set (motor+esc+prop)
1 x	Programador FUTABA USB CIU-3
1 x	Locking cable tie 4.6x203 (uds)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Futaba R7114SB 2.4GHz FASTT/FASSTest S.BUS Receiver
1 x	Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x	Batería LiPo TATTU 1050 mAh 6S 22,2V 120C R-Line
1 x	Flap hinge (6 pcs)
1 x	67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	18 mm reinforced hinge
1 x	Long pinned hinge (6 uds)
1 x	Futaba S9650/9670SV - Upper Case
1 x	AIRSPEED SENSOR SBS01TAS
1 x	Long pinned hinge (12 uds)
1 x	Nylon hinge 20x20x0,3 (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Large flex hinge (12 uds)
1 x	33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Pin hinge 26x11 mm (10 uds)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M
1 x	Fast'n EZ-CA-Hinge, lite (12 uds)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Medium pin type hinge (12 uds)
1 x	Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x	Pin hinge 39x20 mm (10 uds)
1 x	Ant. Cable R606/17/08/14FS L:1500mm
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Micro flex hinge (12 uds)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	FUTABA 32MZ TRANSMITTER + R7108SB RECEIVER
1 x	Nylon hinge 20x15x0,3 (10 pcs)
1 x	Miniature brass strap hinge, 1 m
1 x	Futaba Prop Module F14
1 x	Fast'n EZ-CA-Hinge (12 uds)
1 x	Battery FUTABA 18MZ
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Cylinder for DA-85/170 (1 piece)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cabling for Fox MDM1 wings
1 x	Crankcase gasket DA-100
1 x	DPSI Ampere battery backer
1 x	APM2.6 Power module with 5.3V DC BEC
1 x	Cylinder Gasket set for DA-60 / DA-120
1 x	BOSCH spark plug cap for DA 50-R, DA 100 and DA 150
1 x	Typhoon HET EDF 240-15 4800 kv
1 x	Carb Carrier, red DA-85, DA-100L and DA-120
1 x	Diaphragm set for ZG 74/80B, DA85/100/100L/120/200, VM170/210
1 x	Adapter lead MPX/XT60
1 x	Exhaust gasket DA50R DA100 DA200
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Motor Typhoon 2W-20
1 x	Carburador DA-35, DA-50R-DA-100L , VM-60/70
1 x	Crankshaft bearing middle for DA-85, DA-100, DA-100L, DA-150, DA
1 x	BEC 3A FOXY
1 x	Dia. 25x5 mm tefon tube for escape

35,026.05EUR