119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Oracover CHROME 2m
1 x Oracover Azul Cielo 2 m
1 x Oracover Orange 2 m
1 x MYLAR film A350 (1000x500 mm)
1 x Oratex Antik 2m
1 x Ply-Span 450x600/13g Yellow
1 x Oracover Verde 2 m
1 x Oracover Red 2 m
1 x Oracover Yellow CUB 2 m
1 x Oracover CARBON Metalic 1 m
1 x Oratex Yellow Cub 10 m
1 x Oratex Natural White 2m
1 x Oratex Red Fokker 10 m
1 x Monokote PLATINO metalizado (1.8x0.65m)
1 x Ply-Span 450x600/13g Blue
1 x ORACOVER transparent Yellow (10 m)
1 x ORACOVER Fluor red (2 m)
1 x Oracover Yellow CADMIO 2 m
1 x Oracover Yellow CADMIO 10 m
1 x Oracover White 2 m
1 x Strip ABS 2.0x3.0x1000 mm
1 x Strip ABS 2.0x8.0x1000 mm
1 x Round Rod 1,5x1000 mm
1 x ABS Strip 1.5x8.0x1000 mm
1 x Strip ABS 2.0x5.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 5,0x1000 mm
1 x ABS Strip 1.5x6.0x1000 mm
1 x Round Rod 1,25x1000 mm
1 x Strip 2,0x2,0x330 mm
1 x Round Rod 6,0x1000 mm
1 x ABS Strip 1.0x3.0x1000 mm
1 x Strip 3,5x1,75x330 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Motor DLE 200cc Std
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Hot Glue Stick BLACK
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x Starter EM Gear Power 80
1 x Oracover Black 2 m
1 x Monokote BLUE metalizado (1.8x0.65m)
2 x Oracover ROYAL RED 2m
1 x 4 mm Prop Adapter M6
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
1 x PVC transparent battery termo-retract 85 mm (1 m)
1 x PVC transparent battery termo-retract 195 mm (1 m)
1 x PVC transparent battery termo-retract 51 mm (1 m)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x Oracover White 10 m
1 x 1,6x1000 mm 2:1 red termoretract tube
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Cierva C30 Body Spain
1 x Cierva C30 simulated motor
1 x Wheel keeper washer
1 x Head lower part
1 x Servo Fork
1 x Head core bushing
1 x Tube Pitot to PIXHAWK
1 x Complet landing gear
1 x Nut M2 securing
1 x Blade holder lower
1 x Nut M2
1 x Blade holder upper
1 x Screws M1,6x6 Allen
1 x Bearing 3x6x2,5
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x Head lower part New
1 x Head runner
1 x Raer wall
1 x Connector CAN 15
1 x 2 LiPo XH>EH adapter
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x APM2.6 Power module with 5.3V DC BEC
1 x Connector Sub-D 2+5 Female
4,563.45EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies