119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Angle of incidence meter
2 x Propeller balancer
1 x Truck-trailer for gliders 720 x 285 mm
1 x Truck-trailer for gliders 720 x 239 mm
1 x Medidor ángulos y/o incidencias
1 x Surface Indicator Gauge Small
1 x Field folding model stand
1 x Propeller balancer
1 x Angle measurer
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 30 cm BEC cable (male)
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x CC 02
1 x Adapter lead MPX/EC3
1 x USB HLS prog. interface
1 x 2 LiPo XH>EH adapter
1 x 3 LiPo XH>EH adapter
1 x MPX-Dean "T" Adapter
1 x BEC 3A FOXY
1 x 30 cm BEC cable (female)
1 x TrainerCord (master-learner)
1 x 5 LiPo XH>EH adapter
1 x JETImodel SINGLE BEC
1 x CM-3
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Propeller FALCON 32,5x11 PUSHER Carbono
1 x 1/12 Pilot "Tom"
1 x 1/10 Pilot "Jimmy"
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x Hacker X-Pro USB interface V2
1 x SPARK Switch 7.4v
1 x Female connector for 16 pines AWG
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x MAX BEC 2D plus EX
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x DPS Switch JR/JR
1 x resin-hardener package L-385 with hardener H-385 (875 g)
1 x MAX BEC
1 x SWTU2 switch
1 x Interruptor SPS 70v 60/120A
1 x PWC4 wing/fuselage connector for 4 servos
1 x Female connector for 20 pines AWG
1 x Extension 5 lipos JST/C
1 x resin-hardener L-385 H-385 (5000 g)
1 x Cabling for Fox MDM1 wings
1,680.14EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies