119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Starter EM Gear Power 80
1 x Adaptadores carga 6s JST-XH
1 x Turbina KINGTECH K320 G5
1 x Extension MPX-MPX 20 cm
1 x Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x EXTRA NG 74" yello/blue/red (Skywing RC)
1 x Conector MR-60 (pareja)
1 x SERVO HOLDER
1 x Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x Cable coupler M2 (10 uds)
1 x Connector CAN 15
2 x Fully Threaded Steel Rod M2,5 (2 uds)
1 x ARAMID honeycomb 1300x2600x2 mm
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Remote electric ignition system
1 x ABS angle 3,0x3,0x1000 mm
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.0x5.0x1000 mm
1 x Red smoke canister 65 g
1 x ABS tube 7.0x5.0x1000 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x CC 02
1 x ABS tube 12.0x10.0x1000 mm
1 x Strip ABS 2.0x10.0x1000 mm
1 x XH female balance (2S) connector (2 pcs)
1 x Initior Transmitter FTX2 Wireless
1 x Xplorer4 anemometro
1 x CC 03
1 x "S" set for boats
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Adjustable brass horn threaded M3
1 x Profile ABS half cane 8.0x1000 mm
1 x 20 mm carbon horn
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Cabling for Fox MDM1 wings
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Brass control horn M2 large for wire (2pcs)
1 x Adapter lead MPX/XT60
1 x Brass control horn M2 long for wire (10pcs)
1 x XH male balance (2S) connector (2 pcs)
1 x 
1 x ABS tube 8.0x6.0x1000 mm
1 x Initior Receiver FRX2 Wireless
1 x ABS tube 4.0x2.0x1000 mm
1 x Ball link Aluminio M3 (2 pcs)
1 x Profile ABS Square 4 x 1000 mm
1 x Mixers smoke bombs AX-60 (5 pcs)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x BALSA trip 10x10x1000 mm
1 x Xplorer3 anemometro
1 x Strip 3,5x1,75x330 mm
1 x Green smoke canister 140 g
1 x AX-60 starters (5 pcs)
1 x Strip ABS 2.0x8.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x Yellow smoke bombs AX-60 (5 pcs)
1 x ABS tube 5.0x3.0x1000 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Plasti Dip Liquid Tape 429 ml black
1 x Crimping sleeves for 1.1 mm cable (10 pcs)
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Round Rod 1,0x1000 mm
1 x Ventral support for AX-18/AX-60
1 x ABS tube 16.0x14.0x1000 mm
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x Cable control set
1 x 2 LiPo XH>EH adapter
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x Kwik link AL M3 con Clip (2 pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
1 x 5 mm M2 variable inclined horn
1 x Linden wood slat 2.0x2.0x1000 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x ABS tube 6.0x4.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Couple M4 for wire (10 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x Cable coupler M3 (10 uds)
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Connectors banna oro 6,0 mm (M/F)
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x ABS tube 3.0x2.0x330 mm
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x ABS Strip 1.0x2.0x1000 mm
1 x Optotronix Aurora Plug
1 x Round Rod 2,5x1000 mm
1 x Parachute expulsion foam
1 x BALSA trip 2.0x2.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
7,827.55EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies