119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Rubber profile 6-2 mm 2M
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x ABS "T" angle 8.0x8.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x Flat Connector 4.0 mm x 1000 mm
2 x ABS rectangular profile 10x5.0x1000 mm
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS angle 4,0x4,0x1000 mm
1 x Rubber profile 10-2 mm 2M
1 x Profile ABS Square 4 x 1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x Profile ABS triangular 6.0x1000 mm 90º
1 x ABS angle 3,0x3,0x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Profile ABS half cane 8.0x1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x ABS angle 2,0x2,0x1000 mm
1 x Profile ABS half cane 6.0x1000 mm
1 x ABS angle 5,0x5,0x1000 mm
2 x ABS angle 6,0x6,0x1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
3 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
1 x BALSA leading edge 8x10x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
2 x Pine wood slat 5.0x5.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x TrainerCord (master-learner)
1 x APM2.6 Power module with 5.3V DC BEC
2 x Circlick securite
2 x TP/TopFuel - JST-EH 4/5S Adapter
1 x 5 LiPo XH>EH adapter
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x TP/TopFuel - XH 2/3S Adapter
1 x USB HLS prog. interface
1 x Futaba External voltage input cable Futaba CA-RVIN-700
3 x Black copper lacquer wire Ø0,2 mm (5 m)
3 x "Y" charging 4mm wire (2 IN-1 OUT).
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x CC 03
1 x Adapter lead MPX/EC3
1 x 30 cm BEC cable (female)
2 x BEC 3A FOXY
1 x Copper lacquer wire Ø0,2 mm (5 m)
2 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x ABS I Strip 20x10x1000 mm
1 x Round Rod 6,0x1000 mm
1 x Round Rod 1,0x1000 mm
1 x Round Rod 5,0x1000 mm
1 x Extractor piñones 2.3/3.2 mm
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Aluminium red ball links M3 V1 (10 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Connectors banna gold 5,5 mm (M/F)
1 x 2 mm female connector (2 pcs) with safety connector
1 x Rescue 1,8m2 / BackPack
1 x Profile ABS half cane 7.0x1000 mm
1 x BALSA trip 8.0x8.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Profile ABS Square 1 x 1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Propeller POWER-PROP 7x7
2 x BALSA triangular 15x15x1000 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Balsa panel 8.0x100x1000 mm
1 x A/C economy plywood 600x300x6+.0 mm
1 x Soporte filtro FESTO (4 pcs)
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x7.0x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Dean "T" - Futaba Adapter
1 x 2 LiPo XH>EH adapter
1 x 30 cm BEC cable (male)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Female connector JST SH 1.0mm with 10 cm wire
799.46EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies