Top » Catalog » Hardware » BEC/Cables/Conectors/Interruptor » EMCA15020

119.90EUR

DPSI Ampere battery backer
[EMCA15020]

Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Servo KST BLS905X HV V2.0 8Kg 20mm
93.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	Fresa corte diamante Ø 1.0mm (bola)
1 x
2 x	Fresa corte diamante Ø 2.35mm (flame)
2 x	1,5x50 mm allen screwdriver
3 x	Copier 5x20 cm pcs
2 x	Dremel PERMAGRIT 18 mm round lime
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	2,0x50 mm allen screwdriver
2 x	100g Flux Paste for Silver Solder
1 x	Disposable Injector Bags (30x16cm) 100 pcs
1 x	Dust collector for mould cleaning
3 x	3,0x60 mm allen screwdriver
3 x	Digital weight, angle and balance meter BASIC
1 x
2 x	Dremel 3000 130W
1 x	22 mm Cut Disc Proxxon/Dremmel
2 x	Fresa corte diamante Ø 1.4mm (bola)
2 x	EC-Cutter
1 x	Cut tube
1 x	Copier 2x20 cm pcs
2 x	Digital precision scale up to 2000 g
2 x	Ball Link Plier
2 x	Dean-T Plug Mold
2 x	2,5x60 mm allen screwdriver
1 x	Extra Hard Titanium Herxagon Screwdrivers
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Paint gun for sprays
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Nitroverdu 500 ml
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Carbon fiber rod 16 mm x 1000 mm
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	1000 ml sealer (DOPE)
1 x	Universal Colour Paste deep black 250 g
1 x	Partall paste 650 g
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Painting GHT Lexan Black 150 ml
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	PIX Hawk with accesories
1 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Tube Pitot to PIXHAWK
1 x	Carbon fiber rod 1.0 mm x 1000 mm
2 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Universal Colour Paste signal white (RAL 9003) 1 Kg
1 x	Release wax 250ml
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Solvent Plasti Dip 1000 ml
1 x	500 ml sealer (DOPE)
1 x	Spray adhesive AEROFIX 2
1 x	Spray Graphit 33
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Plasti Dip Liquid Tape 429 ml orange
1 x	Spray YELLOW Inca Lexan 150ml
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Universal Colour Paste white 50 g
1 x	Presto SF Light Filler styrene-free (420 g)
2 x	Glases Nimbus "Black"
1 x	Glases Innovation Plus
1 x	Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x	Glases Ace
1 x	Starter Sullivan-STAR 601
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Hot Glue Stick GREEN
2 x	Vacuum pump 12 CFM
1 x	Starter EM Gear Power 250
1 x	Z Bender - S Type Tool
1 x	Ball Link Plier
2 x	Hot Glue Stick BLACK
1 x	Screwdriver for Hexagon 1,5mm
1 x	Vacuum pump P1-N
1 x	Hot Glue Stick RED
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
2 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler M2 (10 uds)
2 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Crimping sleeves for 1.1 mm cable (10 pcs)
2 x	Angled clevis with threaded rod M3
2 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
2 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	JETImodel SINGLE BEC
1 x	CC 01
1 x	2 LiPo XH>EH adapter
1 x	USB HLS prog. interface
1 x	CM-3
1 x	CC 03
2 x	Red copper lacquer wire Ø0,2 mm (5 m)
1 x	CC 05
2 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	MPX-Dean "T" Adapter
1 x	APM2.6 Power module with 5.3V DC BEC
2 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	Adapter lead MPX/EC3
1 x	Mini Lock Grips 2PCS
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
1 x	Kwik link unmount tool
1 x	Sealing Iron Sleeve PROF
1 x	Concave-Convex sandpaper file 13 mm
1 x	PERMAGRIT Sanding Block 45° 140x51 mm
1 x	Handle for PERMAGRIT lime
1 x	PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x	Precision wrench L100 mm
1 x	Heli blades angle measurer
1 x	Tube bender
1 x	Towing hook
1 x	PCARD Wireless System
2 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Short ball link M3 (6 uds)
1 x	Horn mando small (2 pcs)
1 x	Dremel PERMAGRIT thin lime
1 x	CC 11 Conector
1 x	HBC 10035-3 32-Bit
1 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	20 g tin paste
1 x	Universal Filter
1 x	Heli blades angle measurer
1 x	Glases Nimbus
1 x	PPM Encoder Module
2 x	Tool for entel
1 x	XT-60 Plug Mold
1 x	Propeller drill jig DA 100/85/120/150/200 and VM 60-210
1 x	Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Sealing Iron Profi LCD
1 x	Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs)
1 x	Laminating brush 10 mm, pack/ 50 pcs
2 x	Schul-Malpinsel Gr.5
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Hobbylite Filler, Balsa colour
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x	Brazo servo aluminio KST 25T-5V2,3515,325,125,135,145X10,X12,A13
1 x	Connector CAN 15
1 x	SPS Remote switch actuator
2 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	Switching module high voltage SXH
1 x	Digital scale up to 40 kg
2 x	CC 02
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	3 LiPo XH>EH adapter
1 x	Servo KST X08 Plus 9g HV servo
1 x	Servo KST X20 8.4-50 V8.0 45kg 8.4v Softstar
1 x	Servo KST X15-1208 V8.0 13.5Kg HV
1 x	Servo KST X10 MINI wing 10mm 23g 7.5Kg
1 x	Servo KST A08H V6.0 3,2Kg HV
1 x	Servo KST X20-7512 V8.0 82kg 8.4v
1 x	Male connector for 6 pines AWG
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	DPS Switch JR/JR

8,008.60EUR