119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Extension PVC 150 cm (Graupner)
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension 30 cm (Futaba)
1 x Prolongador S-Bus JR/JR 20cm
1 x Extension silicon 10 cm (Graupner)
1 x Extension silicon 10 cm (Futaba)
1 x Extension 100 cm (Futaba)
1 x Futaba Female 40 cm extension
1 x Extension 90 cm (Futaba)
1 x Premium servo extension 50cm
1 x 0,14 mm PVC servo wire extension, ZH micro conector.
1 x Extension silicon 35 cm male (Futaba)
1 x Extension silicon 100 cm (Futaba)
1 x Cable S.BUS 3 salidas 300 mm
1 x Premium servo extension 100cm
1 x servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x 200 mm extensión servo HITEC/JR
1 x Extension S-Bus 1-2 silicon 120 cm FUTABA
1 x Cabel "Y" 15 cm
1 x silicon 100 cm Futaba Extension Ø 0,35 mm
1 x Extension silicon 30 cm male (Futaba)
2 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x Carbon roving DowAksa / 24k / 1600 tex
2 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x ARAMID honeycomb 1300x2600x2 mm
2 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
2 x Vacuum bag, 1200 mm x 50 m
1 x Dean "T" - Futaba Adapter
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x 5 LiPo XH>EH adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x USB HLS prog. interface
1 x TrainerCord (master-learner)
1 x CC 05
1 x Adapter lead MPX/XT60
1 x CC 01
1 x 3 LiPo XH>EH adapter
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Cabel charger transmitter GRAUPNER
1 x CC 03
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x RH long aluminium horn (2pcs)
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Quicklock washer 2 mm (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x Premium servo extension 25cm
1 x Prolongador S-Bus JR/JR 10cm
1 x USB interface ALTIS
1 x 2 LiPo XH>EH adapter
1 x Glass fibre sleeve Ø 20 mm X 20m
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber flat 1000x3.0x0.13 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 0.5 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x Carbon plate 500x400x2.0 mm ISOTECH
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
2 x Glass fibre sleeve Ø 20 mm
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x Sandwich carbon + poplar 2mm + carbon 290x160 mm
1 x Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x Teflon rollers 80 mm x 15 mm Diam.
1 x Carbon plate 350x150x2.5 mm
1 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Motor 2212 (1000KV) Quadcopter F450
1 x Locking cable tie 2.5x100 (uds)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Carbon plate 350x150x0.5 mm
1 x Buy Perforated film 100 cm / 20 m
1 x Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x Peel ply 93 g/m² (plain weave) 150 cm x 5m
1 x Aluminium sheet 500x250x0,5mm
1 x Chopped glass fibre strands 3 mm
1 x Carbon plate 350x150x4.0 mm
1 x Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x PVC grid straight 290x185x0.32 mm
1 x Foam plastic plates (310x210x3 mm)
1 x Propadapter for motor A60-V2
1 x Sparkplug 1/4-32
1 x Propadapter for motor A50
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x EME 55 cc carburetor WALBRO
1 x Styrene plate 320x120x0.5 mm
1 x Foam plastic plates (310x210x8 mm)
1 x DPSI magnetic switch actuator (housing)
1 x Male connector for 6 pines AWG
6,688.91EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies