119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Plasti Dip Liquid Tape 429 ml black
1 x 20 g tin paste
1 x Presto SF Light Filler styrene-free (420 g)
1 x Spray adhesive AEROFIX 2
1 x Paint gun for sprays
1 x Truck-trailer for gliders 720 x 285 mm
1 x 500 ml sealer (DOPE)
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Aspen
1 x 1000 ml sealer (DOPE)
1 x Truck-trailer for gliders 720 x 239 mm
1 x Solvent Plasti Dip 1000 ml
1 x Plasti Dip Liquid Tape 429 ml orange
1 x Universal Colour Paste deep black 250 g
1 x Angle measurer
1 x Spray Graphit 33
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x PARTALL® Hi-Temp Wax, 340 g
1 x Glases Ace
1 x Medidor ángulos y/o incidencias
1 x Spray EC Red 400ml
2 x Glases Flitemaster
1 x Angle of incidence meter
1 x Surface Indicator Gauge Small
1 x Field folding model stand SebArt
1 x Nitroverdu 500 ml
1 x Hobbylite Filler, Balsa colour
1 x Propeller balancer
2 x Glases Nimbus "Black"
1 x Field folding model stand
1 x Glases Nimbus
1 x Painting GHT Lexan Black 150 ml
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector JR Servo female (10 pcs)
1 x Banna gold connector 2,5 mm (M/F)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Conector MR-60 (pareja)
1 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo male (50 pcs)
1 x Conector JAPAN G2 Set 5 pares
1 x Connectors banna gold 5,5 mm (M/F)
1 x Conector JR Servo male (10 pcs)
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x Connectors banna oro 0,8 mm (M/F)
1 x Conector AS150 7mm antichispazo (Set: 2 pares)
1 x Conector BEC female (10 pcs)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Conector JR Servo female (50 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Conector XT-30 (macho)
1 x Bag connector 2 mm
1 x Connectors banna oro 3 mm (M/F)
1 x Conector JR Servo male (10 pcs)
1 x Connectors banna oro 2 mm (M/F)
1 x Conector Servo female 4 pines
1 x Motor A2212/13T
1 x Cable tie mounts 4.3 (4 uds)
1 x Allen wheel collar M4x6
1 x 38x4,5 mm wires output (2 pcs)
1 x 45 mm rods set for direction control
1 x 41x5,5 mm wires output (2 pcs)
1 x 90 mm rods + T patellas set for direction control
1 x Cable grommet Ø 4 mm (4 uds)
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cable grommet Ø 5 mm (4 uds)
1 x 250 mm / 16 mm Airbrakes
1 x 28x5 mm wires output (2 pcs)
1 x 45 mm rods + T patellas set for direction control
1 x 140 mm rods set for direction control
1 x Cap closure 33/23.5mm (2 uds)
1 x Aluminun wheel collar 2 mm Ø (4 uds)
1 x Allen wheel collar M3x5
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Allen wheel collar M3x3
1 x Glases Innovation Plus
1 x DPS Switch JR/JR
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x CC 03
1 x Cinta Goldfix 1m
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Double conector with JR adapter and 200 mm extension
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Adapter lead MPX/XT60
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x BEC 3A FOXY
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 20x1000 mm Ring Strap Back To Back
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x DPSI magnetic switch actuator (housing)
1 x SE Ring 480 mm (2 pcs)
1 x CM-3
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Connector CAN 15
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Connector Sub-D 2+5 Female
1 x CC 01
1 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x SE Ring 250 mm (2 pcs)
1 x Tape GFK 25 mm
1 x Marker ties (20 pcs)
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x Adapter lead MPX/EC3
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 2 LiPo XH>EH adapter
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x SE Ring 350 mm (2 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Cabling for Fox MDM1 wings
1 x 3 LiPo XH>EH adapter
1 x SE Ring 300 mm (2 pcs)
1 x Tape GFK 50 mm
1 x 30 cm BEC cable (male)
1 x Cabel charger transmitter GRAUPNER
1 x Dean "T" - Futaba Adapter
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x 4 LiPo XH>EH adapter
2,056.74EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies