119.90EUR

DPSI Ampere battery backer
[EMCA15020]



Contenido del kit
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models. System stability of the DPSI Ampere is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery. The DPSI Ampere is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.

The DPSI Ampere can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.

The DPSI Ampere is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere.

Delivery includes switching magnet with EMCOTEC patch, backup magnet, 3D sticker as well as German and English operating instructions.

Specifications
Current sources: 4S to 8S NiCd / NiMH batteries, 2S to 3S Lithium++ batteries (LiPo, LiFePO4, LiIon)
Operating voltage range: 2.6V (*) .... 13.2V
Nominal input voltage: 3.6V .... 13.0V
Output voltage: same as input voltage (no dropout losses)
Quiescent current (turned off): < 4µA per battery
Quiescent current (turned on): approx. 30mA total
Max. continuous current: 50A (30A per channel)
Max. peak current (10 sec.): 60A (30A per channel)
Internal resistance: approx. 3mR
CE test: according to 2004/108/EG
Environmental conditions: -10°C .... +50°C (14°F ... 122°F)
Permissible temperature range: -25°C .... +70°C (-13°F ... 158°F)
Dimensions (L x W x H): 60mm x 64mm x 16mm (2.36in x 2.52in x 0.63in)
Weight: 45g (1.59oz)


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Mini-Pix Esc 15 Amp
1 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Swing 1000
1 x Propeller POWER-PROP 14x9 Izda
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x TMM 2512-3S heli
1 x Set cintas unión paracaídas 145 cm
1 x Fuel Fittings-Gold
1 x Ball Link Plier
1 x Hot Glue Stick RED
1 x Compact on-board starting system (9724)
1 x RCEXL Electronic ignition twin A-02
1 x Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x 500 ccm complete gasoline fuel tank
1 x Starter 12v (Max 180 and 30ccm)
1 x Y-Hose connector 4-4-4mm
1 x Compact on-board starting system (9715)
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x SAITO FG-36 carburetor
1 x FESTO connector M5 Quick 4 mm
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Ball Bearings for motor A60-V2
1 x Tacometer mini ignition RCEXL
1 x Propeller diller for EME35 and DLE35
1 x Aluminium wide washer M4 Gold (4 pcs)
1 x BALSA leading edge 8x10x1000 mm
1 x SE Ring 360 mm (2 pcs)
1 x Blind nut M4 (4 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Balsa panel 3.0x100x1000 mm
1 x Balsa panel 1.0x100x1000 mm
1 x Aluminium cap bolt washer M4 red (8 pcs)
1 x LOWER TOW HOOK
1 x Spikes Band (5 m)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Red smoke bombs AX-60 (5 pcs)
1 x SE Ring 240 mm (2 pcs)
1 x "S" set for planes
1 x Blind nut M5 (10 pcs)
1 x Smoke set "S"
1 x Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 lilac pcs)
1 x Smoke set "Glider"
1 x Balsa panel 2.0x100x1000 mm
1 x Extension MPX-MPX 20 cm
1 x CC 03
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x 5 line servos wire black (1 m)
1 x Conector JR Servo male (10 pcs)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Charger LiPo Charger4
1 x Black silicone 1,0 qmm wire (50 m)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Protective Cover for wires Ø 3 mm 1000 mm
1 x DPS Switch JR/JR
1 x Ferrita 14x8x5.5 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Protective Cover for wires Ø 6 mm 1000 mm
1 x 500 ml sealer (DOPE)
1 x Conector Servo female 4 pines
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Connectors banna oro 0,8 mm (M/F)
1 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x 5 LiPo XH>EH adapter
1 x Nitroverdu 500 ml
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x CC 01
1 x 6 mm Quick clamp_S (10 pcs)
1 x Straightened threaded rod M3 - 1m
1 x 30 cm BEC cable (male)
1 x Protective Cover for wires Ø 10 mm 1000 mm
1 x Conector BEC male (10 pcs)
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x 50m servo "Premium" wire (white/red/blue)
1 x Partall paste 650 g
1 x 10m servo "Premium" wire (white/red/blue)
3,055.18EUR
Manufacturers
Manufacturer Info
Emcotec
Emcotec Homepage
Other products
Languages
Español English
Currencies