Top » Catalog » Hardware » ABS/GFK/CFK plate » R2101002

10.50EUR

Chopped glass fibre strands 3 mm
[R2101002]

Chopped glass fibre strands 3 mm (1 Kg)

Fast, good wetting
Ideal for polyester resins due to the coating, well suited for epoxy resins

Technical data:
Fibre type: E-Glass
Shape in section: Round
Fibre coarseness: 9–14 µm
Length: 3 mm ± 5 mm
Specific gravity: 2.53–2.55 g/cm³
Resistance to dry heat: ca. 315 °C
Softening temperature: approx. 840 °C
Moisture content on delivery: max. 0.3 %
Colour: White
Surface treatment: Silane based 0.5–1.5 %

Resistance to light, to weather, to ageing = good
Acid resistance = good
Alkali resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Applications:
Fibre pastes and moulding compounds, synthetic plasters, putties, adheslves, corrosion protection coats, asbestos substitutes. In the case of coupling layers to fill and back up edges and embed alignment dowels and screw unions in mould construction, a mixture of 50 % vol. chopped glass fibre and 50 % vol. cotton flock is mostly used. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

2 x	ABS tube 5.0x3.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 8.0x7.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 20.0x18.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 3.0x1.0x1000 mm
1 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
2 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
2 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Vacuum bag, 1200 mm x 50 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
2 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
2 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
2 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Medidor ángulos y/o incidencias
1 x	Propeller balancer
1 x	WingFix ULTRA Black Edition
2 x	Surface Indicator Gauge Small
1 x	Field folding model stand
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	Propeller balancer
1 x	Angle measurer
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	Nitroverdu 500 ml
1 x	6,4x1000 mm 2:1 green termoretract tube
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	ABS tube 4.0x2.0x1000 mm
1 x	Film release agent PVA 25 ml
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Fiberglass plate 350x150x2.5 mm
1 x	Soporte grifo FESTO (2 pcs)
1 x	Aluminium sheet 500x250x0,5mm
1 x	Fiberglass plate 350x150x1.0 mm
2 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Support conector MPX (6 pcs)
1 x	Support Filtro FESTO
1 x	L-Connector 4.0 mm x 1000 mm
1 x	270 mm 3/3 mm shaft ship
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	U Profile ABS 3,0x6,0x1000 mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg
1 x	Quadcopter Q50 Kit Carbon Fiber
1 x	Bateria DJI Mini 2 2250 mAh
1 x	Spare Part Frame Set for EACHINE RACER 250
2 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	DJI FPV Combo
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	DJI Mavic Air Fly More Combo
1 x	SERVO DES 806 Pignons
1 x	Soporte metal para servos
1 x	PVC yellow transparent battery termo-retract 69 mm (10 m)
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	4,8x1000 mm 2:1 blue termoretract tube
1 x	RX external cable for estandar receivers
1 x	resin-hardener package L-385 with hardener H-385
1 x	Mould Resin P 10 kg
1 x	HDT Jet Central
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	PET film Mylar® A 350, 50 cm, roll/ 2 m
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Strip ABS 2.0x10.0x1000 mm
1 x	Rudder 107-06
1 x	U Profile ABS 8,0x4,0x1000 mm
1 x	Power Pack SE Series JETCENTRAL
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Chopped glass fibre strands 3 mm
1 x	Actro 32-3 Heli MAX 5mm
1 x	Carbon plate 350x150x0.5 mm
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Carbon plate 700x550x0.5 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
1 x	XPower XC4226/12 LS
1 x	Motor XPower F2915/12 XLight
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	Carbon plate 350x150x1.5 mm
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	XPower XC3522/5 LS
1 x	Carbon plate 350x150x2.0 mm
1 x	Carbon plate 350x150x5.0 mm
1 x	Carbon plate 350x150x3.0 mm
1 x	Carbon plate 350x150x4.0 mm
1 x	Carbon plate 500x400x2.0 mm ISOTECH

12,897.15EUR