Top » Catalog » Hardware » ABS/GFK/CFK plate » R2101001

4.50EUR

Chopped glass fibre strands 3 mm
[R2101001]

Chopped glass fibre strands 3 mm (200 g)

Fast, good wetting
Ideal for polyester resins due to the coating, well suited for epoxy resins

Technical data:
Fibre type: E-Glass
Shape in section: Round
Fibre coarseness: 9–14 µm
Length: 3 mm ± 5 mm
Specific gravity: 2.53–2.55 g/cm³
Resistance to dry heat: ca. 315 °C
Softening temperature: approx. 840 °C
Moisture content on delivery: max. 0.3 %
Colour: White
Surface treatment: Silane based 0.5–1.5 %

Resistance to light, to weather, to ageing = good
Acid resistance = good
Alkali resistance = limited
Solvent resistance = good
Swelling value in water = 0 %

Applications:
Fibre pastes and moulding compounds, synthetic plasters, putties, adheslves, corrosion protection coats, asbestos substitutes. In the case of coupling layers to fill and back up edges and embed alignment dowels and screw unions in mould construction, a mixture of 50 % vol. chopped glass fibre and 50 % vol. cotton flock is mostly used. The volume details are intended to assist in judging the amount supplied. These details refer to the loose bulk amount. The contents may become compressed during transport or storage

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Straightened rod Ø 4.5 mm x 1000 mm
1 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 5.5 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
2 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	Straightened rod Ø 6.0 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
3 x	Parachutist
2 x	"M" set
2 x	"S" set for boats
2 x	3l Smoke oil
2 x	Red smoke canister 100 g
3 x	Black smoke bombs AX-60 (5 pcs)
3 x	Mixers smoke bombs AX-60 (5 pcs)
2 x	Blue smoke canister 140 g
2 x	"S" set for planes
2 x	AX-60 starters (5 pcs)
3 x	Parachute expulsion foam
2 x	Yellow smoke canister 100 g
3 x	Yellow smoke canister 140 g
2 x	Green smoke canister 100 g
3 x	Green smoke canister 140 g
2 x	White smoke canister 100 g
2 x	White smoke bombs AX-18 (5 pcs)
2 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Electric rocket starters (6 pcs)
2 x	White smoke canister 140 g
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
2 x	Profile ABS half cane 3x1000 mm
1 x	Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x	Glases Ace
1 x	Cabel "Y" 15 cm
1 x	Release wax 250ml
1 x	Stickers-digit for marking
1 x	Aluminium cap bolt washer M4 green (8 pcs)
1 x	SE Ring 300 mm (2 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Round Rod 1,25x1000 mm
1 x	Copier 2x20 cm pcs
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	2 LiPo XH>EH adapter
1 x	Support pump Xicoy X45
1 x	Support pumb/filter Xicoy X45
1 x	Support FUEL DOT V3
3 x	Remote electric ignition system
3 x	Green smoke canister 65 g
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x	Rubber profile 10-2 mm 2M
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
2 x	White smoke bombs AX-3 (10 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	Rubber profile 6-2 mm 2M
1 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS half cane 4x1000 mm
1 x	Smoke set "Glider"
1 x	Profile ABS half cane 8.0x1000 mm
2 x	Initior Receiver FRX2 Wireless
1 x	Profile ABS half cane 7.0x1000 mm
1 x	Extension PVC 150 cm (Graupner)
1 x	Extension silicon 100 cm (Graupner)
1 x	Extension silicon 25 cm (Graupner)
1 x	200 mm extensión servo HITEC/JR
2 x	Extension 7.5 cm
1 x	Extension 100 cm (Futaba)
2 x	Extension silicon 35 cm (Futaba)
1 x	Extension silicon 30 cm male (Graupner)
1 x	Cable silicona female batt. receptor 30 cm (Futaba)
1 x	Extension silicon 35 cm male (Futaba)
1 x	Extension 15 cm (Futaba)
1 x	servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Extension 30 cm (Futaba)
2 x	Circlick securite
1 x	Extension silicon 30 cm female (Futaba)
2 x	Extension silicon 75 cm (Graupner)
2 x	Motor A2212/13T
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Clip mini fixing for wing (2 pcs)
2 x	Allen wheel collar M4x6
1 x	90 mm rods + T patellas set for direction control
1 x	Cierre cabina aluminio Ø5, I=16 mm
1 x	41x5,5 mm wires output (2 pcs)
2 x	Allen wheel collar M4x4
1 x	Cable grommet Ø 3.2 mm (4 uds)
1 x	250 mm / 16 mm Airbrakes
1 x	Prolongador S-Bus JR/JR 20cm
2 x	Carbon Non-Woven, 160 g/m² 127 cm 5m
2 x	Carbon Non-Woven, 240 g/m² 100 cm x 5m
1 x	Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain)
1 x	12 mm dogdrive props
1 x	Adapter 3,2 mm M8
1 x	6 mm Prop Adapter M8
1 x	Wing tips support for AX-18/AX-60 (2 pcs)
1 x	Allen wheel collar M3x3
1 x	Yellow smoke canister 65 g
1 x	Allen wheel collar M3x5
1 x	AX-60 starters (5 pcs)
1 x	Red smoke canister 140 g
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	2,3 mm Prop Adapter M5
1 x	Aluminun wheel collar 3.5 mm Ø (4 uds)
1 x	White smoke bombs AX-9 (10 pcs)
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	2,3 mm Prop Drive Günther M4
1 x	Red smoke canister 65 g
1 x	White smoke canister 65 g
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Premium servo extension 25cm
1 x	Carbon plate 350x150x4.0 mm
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Carbon plate 550x350x1.5 mm ECOTECH
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Screw-lock connector Ø 2 mm (2 uds)
1 x	Steering arm 16 mm Ø 4 mm
1 x	Canopy Lock V1 M3 Red (2 pcs)
1 x	Locking cable tie 3.2x142 (uds)
1 x	Stainless steel cable Ø 0.62 mm (10 m)
1 x	5 mm Prop Adapter M6
1 x	3,2 mm Prop Adapter M5
1 x	3 mm Short Prop Adapter M5
1 x	3 mm Long Prop Adapter M5
1 x	10 mm dogdrive props
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 3,0 mm M6
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	4 mm Prop Adapter M6
1 x	2 mm Prop Adapter M5
1 x	Red smoke bombs AX-60 (5 pcs)
1 x	Adapter 5,0 mm M8
1 x	Adapter 4,0 mm M8
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	PCARD Wireless System
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	White smoke bombs AX-60 (5 pcs)
1 x	Smoke set "S"
1 x	5 mm Prop Adapter M8
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x
1 x	Adapter 3,0 mm M8
1 x	Blue smoke canister 100 g
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Ventral support for AX-18/AX-60
1 x
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	FIALA Propeller 19x12 Electric
1 x	Cable silicona macho batt. receptor 30 cm (Graupner)
2 x	Extension silicon 10 cm (Futaba)
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Extension silicon 50 cm (Futaba)
1 x	Chopped glass fibre strands 3 mm
1 x	Carbon plate 350x150x1.0 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon plate 350x150x0.5 mm
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Chopped glass fibre strands 0.2 mm
1 x	Carbon plate 350x150x1.5 mm

7,156.20EUR