Top » Catalog » Hardware » ABS/GFK/CFK plate » R1605291

17.00EUR

Colormatic 2K Soft fine putty white, 1 kg
[R1605291]

Colormatic 2K Soft fine putty white
2K UP-Soft fine putty. Especially formulated for the application on very plain surfaces. Good hold, also on vertical surfaces.

Application:
To fill small unevennesses. Excellent adhesion on bare metal surfaces, also on wood, concrete and plastics. Fast curing makes a continuing work possible. Through micro-fine fillers is it possible to achieve a very even surface. Painting possible after wet sanding only once with P400. ColorMatic 2K Soft Fine Putty can be sanded easily because of its flexible and constant texture

Technical data:
Sanding after: approx. 20 minutes
Pot life (70 °F = 20 °C): approx. 4–5 minutes
Flash point: approx. 33 °C
Density (70 °F = 20 °C): 1.7 g/cm³
Hardener: 2–4 %
Temperature resistance of the cured material: approx. 120 °C
Resistant against: solvents, propellants, acid, base, humidity and road salt

Important:
Protect product from frost and heat. Storage temperature about 59 °F (15 °C) and 77 °F (25 °C). Shelf life: 12 months, by cool and dry storage of unopened can

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Electric Landing Gear ULTIMATUM 3.0 (Elektron Re
1,160.39EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	Spray YELLOW Inca Lexan 150ml
1 x	XH female balance (3S) connector (2 pcs)
1 x	XH male balance (5S) connector (2 pcs)
1 x
1 x	Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x	XH female balance (5S) connector (2 pcs)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	500 ml sealer (DOPE)
1 x	Optotronix Aurora Plug
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Spannlack 1000 ml
1 x	Conector BEC male (10 pcs)
1 x	MPX Sub-D Adaptor
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Banna gold connector 2,5 mm (M/F)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	Universal Colour Paste deep black 50 g
1 x	Connectors DEANS (T)
2 x	Plasti Dip Liquid Tape 429 ml black
1 x	EC5-Set female, simple quality, 2 x female pin, 1 x blue housing
1 x	Spray Graphit 33
1 x	Conector Servo female 4 pines
2 x	Connectors banna oro 4 mm (M/F)
1 x	Spray adhesive AEROFIX 2
1 x	Spray EC Red 400ml
1 x	Nitroverdu 500 ml
1 x	Universal Colour Paste deep black 250 g
1 x	Solvent Plasti Dip 1000 ml
2 x	Spray adhesive INFUTAC (Clear) 500 ml
1 x	Painting GHT Lexan Black 150 ml
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Plasti Dip Liquid Tape 429 ml orange
2 x	Connectors banna oro 3,5 mm (M/F)
1 x	Connectors banna oro 3 mm (M/F)
1 x	Connectors banna oro 4 mm (M/F) (ultralight)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	ABS 500 x 400 x 1 mm (white)
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Buy Perforated film 100 cm / 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
2 x	Profile ABS half cane 5.0x1000 mm
1 x	5 LiPo XH>EH adapter
1 x	4 LiPo XH>EH adapter
1 x	Double conector with JR adapter and 200 mm extension
1 x	Profile ABS Square 4 x 1000 mm
2 x	Flat Connector 4.0 mm x 1000 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	ABS angle 10,0x10,0x1000 mm
1 x	DPS Switch JR/JR
1 x	ABS angle 4,0x4,0x1000 mm
1 x	Cross Connector 4.0 mm x 1000 mm
1 x	ABS "T" angle 2.0x2.0x1000 mm
1 x	Adapter lead MPX/EC3
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	CC 01
1 x	Profile ABS triangular 2.0x1000 mm 90º
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	30 cm BEC cable (male)
2 x	L-Connector 1.5 mm x 1000 mm
1 x	ABS "T" angle 10.0x10.0x1000 mm
1 x	CC 02
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	DPSI magnetic switch actuator (housing)
1 x	Adapter lead MPX/XT60
1 x	3 copper lacquer wire Ø0,2 mm (1 m)
1 x	Profile ABS Square 3 x 1000 mm
1 x	BEC 3A FOXY
1 x	Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x	Dean "T" - Futaba Adapter
1 x	Profile ABS half cane 2.5x1000 mm
1 x	DPSI Ampere battery backer
1 x	Profile ABS triangular 4.0x1000 mm 60º
3 x	Profile ABS half cane 2.0x1000 mm
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x	Circlick securite
1 x	L-Connector 4.0 mm x 1000 mm
1 x	Profile ABS triangular 6.0x1000 mm 90º
1 x	Cabling for Fox MDM1 wings
1 x	Profile ABS Square 2 x 1000 mm
1 x	ABS angle 6,0x6,0x1000 mm
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x	Connector Sub-D 2+5 Male
1 x	L-Connector 1.0 mm x 1000 mm
1 x	Connector Sub-D 2+5 Female
1 x	Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x	ABS rectangular profile 10x5.0x1000 mm
2 x	Profile ABS half cane 8.0x1000 mm
2 x	ABS rectangular profile 12x6.0x1000 mm
1 x	CC 05
1 x	Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x	Surface Indicator Gauge Small
1 x	Medidor ángulos y/o incidencias
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Field folding model stand
1 x	Propeller balancer
1 x	WingFix ULTRA Black Edition
1 x	Truck-trailer for gliders 720 x 239 mm
1 x	Field folding model stand SebArt
1 x	800TVL CMOS camera for FPV
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	AX-60 starters (5 pcs)
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Aluminium wide washer M3 blue (4 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	1/10 Pilot "Jack"
1 x	Straightened threaded rod M2-1m
1 x	resin-hardener L-385 H-385 (625 g)
3 x	Partall paste 650 g
1 x	Paint gun for sprays
1 x	Cotton Flocks, bag/ 500 g
1 x	Conector JR Servo male (10 pcs)
1 x	Conector JR Servo female (10 pcs)
1 x	Connectors MPX female (PIN double)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Rigid coupling brass Ø 4 mm L: 25 mm
1 x	Cotton Flocks, bag/ 7 Kg
1 x	MR30 connector male
2 x	Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x	Liferaft 47 mm
1 x	Conector XT-30 (hembra)
1 x	1000 ml sealer (DOPE)
1 x	Stick coupler Ms 15 mm
1 x	MR30 connector female
1 x	Profile ABS half cane 6.0x1000 mm
1 x	GRAFAS MAXI ARF
1 x	Fox MDM 1 4000 mm Std.
1 x	120x60 mm SLH KOVO wheel
1 x	Conector BEC female (10 pcs)
1 x	Plasti Dip Liquid Tape 429 ml black
1 x	Gold antispark 5,5 mm plug
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	Rubber profile 10-2 mm 2M
1 x	Carbon plate 350x150x0.5 mm
1 x	Carbon plate 350x150x1.5 mm
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
1 x	Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x	Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Teflon rollers 80 mm x 15 mm Diam.
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Fiberglass 25 g/m² 5000x1270 mm
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Streamline Stainless Steel Tubing 12.3x7.7x1000 mm
1 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	Set Altimeter SHRead
1 x	DC Small for MultiLog & UltraLight
1 x	Block 21x19 mm (5 pcs)
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm

7,302.91EUR