Top » Catalog » Hardware » Carbon/Brass/Steel/ABS/Aluminium » R77100503-088

25.00EUR

Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
[R77100503-088]

Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm

Carbon fibre tubes (tapered/conical)
Roll-wrapped conical carbon fibre tubes with a smooth surface finish of 3k carbon fabric prepreg in plain weave, clear-coated glossy. Subjacent layers from unidirectional non-crimp fabric. High-quality epoxy resin matrix.
Fibre orientation:
Surface layer: 0°/90°
Core layers: 0°
Characteristics:
Lightweight, excellent corrosion and heat resistance, and electrical conductivity. Very good flexural and hoop stiffness.
After laminating, the wound CFK round tubes are ground (round) to size and then coated.
Tolerances:
Deviation in diameter ± 0.2 mm. Deviation in straightness max. 2 mm/m. The measured values are generally far below the maximum.
Ideally suited as tail boom for small gliders, HLGs, and DLGs up to 1 m wing span and F1B / F1H free flight models.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAVAGE Max Red 1080 mm
129.90EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
2 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
2 x	ABS tube 4.0x3.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
3 x	ABS tube 20.0x18.0x1000 mm
3 x	ABS tube 4.0x2.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
2 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
2 x	ABS tube 9.0x8.0x1000 mm
1 x	ABS tube 6.0x5.0x1000 mm
2 x	Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Xplorer2 anemometro
1 x	Xplorer4 anemometro
1 x	ABS tube 7.0x6.0x1000 mm
2 x	ABS tube 3.0x2.0x1000 mm
2 x	Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
2 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 8.0x6.0x1000 mm
1 x	ABS tube 18.0x16.0x1000 mm
2 x	ABS tube 14.0x10.0x1000 mm
1 x	Xplorer3 anemometro
2 x	ABS tube 3.0x2.0x330 mm
2 x	ABS tube 6.0x4.0x1000 mm
3 x	ABS tube 5.0x4.0x156 mm
2 x	Cap Hispano Aviación
2 x	Vest clothes Hispano Aviación
1 x	Side rudder
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	A/C quality beech plywood 1520x750x4.0 mm
1 x	Head lower part New
1 x	Grub screw M3x3 shouldered (2 pcs)
1 x	Balsa panel 3.0x100x1000 mm
1 x	Balls 4 mm
1 x	Blades 330mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Blade holder lower
1 x	Rudder
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA trip 5.0x5.0x1000 mm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	Head core bushing
1 x	Steering lever
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Raer wall
2 x	Steel Screw M1x8 (10 pcs)
1 x	Nut M2 securing
1 x	BALSA triangular 15x15x1000 mm
2 x	Screw M3x16
1 x	A/C quality beech plywood 600x300x5.0 mm
2 x	Tail support (2 pcs)
1 x	Balsa panel 6.0x100x1000 mm
1 x	Head upper part
1 x	Baering 3x8x4
1 x	Rotorhead pushrod
1 x	Balsa panel 10x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	Balsa panel 5.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Balsa panel 2.0x100x1000 mm
1 x	LA500 freewheel bearing
1 x	LA500 housing-upper cyclic
1 x	Piñon motor rotor LA-500
1 x	LA500 rotor head core
1 x	LA500 ciclic lever
1 x	LA500 cyclic central part
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 8.0x7.0x1000 mm
4 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Allen wheel collar M4x6
1 x	1/6 Pilot "Buddy"
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	1000 ml sealer (DOPE)
1 x	SE Ring 360 mm (2 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Cable Cargador FUTABA
1 x	Carbon fiber flat 1000x3.0x0.13 mm
1 x	L cockpit anchor "tipe F3A" (2 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Xplorer1 anemometro
1 x	Dust collector for mould cleaning
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	DUPLEX 2.4EX Central Box 210
1 x	Decorative caps, multicoloured, short
1 x	Transmitter COCKPIT SX 12 M-Link (only Tx)
1 x	Futaba Aero Large Case - Internal Foam
1 x	Switch Cap M (blue)
1 x	Maleta transporte FUTABA 10PX
1 x	Emisora JETI Duplex DS-16 II Carbon Line YELLOW
1 x	Transmitter JETI Duplex DS-24 EX Carbon Line Multimode
1 x	Transmitter JETI Duplex DS-12 EX Multimod YELLOW
1 x	Transmitter JETI Duplex DS-24 EX Multimode
1 x	Interruptor On/Off Corto micro
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Tail boom
1 x	Head runner
1 x	Blade holder center GFK 0,5 mm
1 x	Servo Fork
1 x	Blade holder upper
1 x	Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x	Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
2 x	Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x	Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x	Futaba Female 40 cm extension
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
2 x	Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x	Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 9.0x7.0x1000 mm
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	ABS tube 3.0x1.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
2 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x	Mini Infrared Thermomiter
1 x	Aero-Master Fuselage (Aero-naut)
1 x	Beech dowels 4.0 x 1000 mm
1 x	4 mm Prop Adapter M8
1 x	Prop Shaft Adapter 6 mm/M8 "long" 35 mm
1 x	Conector JAPAN G2 Set 5 pares

10,238.16EUR