2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | U Profile ABS 1,0x2,0x1000 mm |
2 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Locking cable tie 3.2x142 (uds) |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
3 x | Canopy Latch |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
2 x | ABS angle 10,0x10,0x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
2 x | L-Connector 1.0 mm x 1000 mm |
3 x | Steering arm 16 mm Ø 3 mm |
1 x | Profile ABS Square 1 x 1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
2 x | ABS "T" angle 8.0x8.0x1000 mm |
3 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
1 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
3 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | U Profile ABS 5,0x10,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | Flat Connector 4.0 mm x 1000 mm |
3 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
2 x | ABS angle 2,0x2,0x1000 mm |
3 x | L cockpit anchor "tipe F3A" (2 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
2 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Profile ABS Square 4 x 1000 mm |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | ABS angle 4,0x4,0x1000 mm |
3 x | Cap closure 33/23.5mm (2 uds) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
3 x | Screw-lock connector M2 (2 uds) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
2 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
2 x | Flat washer 1.7 mm (20 pcs) |
3 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Spring lock washer 4.1 mm (20 pcs) |
2 x | Quicklock washer 1 mm (10 pcs) |
2 x | Lock washer 2.2 mm (20 pcs) |
2 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Quicklock washer 3.5 mm (10 pcs) |
2 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
3 x | Simulador RealFlight RF-9.5 S (sin emisora) |
2 x | RH long aluminium horn (2pcs) |
2 x | Small aluminium horn red (2pcs) |
2 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Brass control horn M4 short for wire (10pcs) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Horn 6/20 with M3 Bearing |
1 x | Small aluminium horn blue (2pcs) |
3 x | Horn with ball 40x30 |
1 x | 6 mm red aluminium threaded horn with patella |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | Cable with accesories |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Horn 5/15 with M2 Bearing |
1 x | Cable control set |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Small aluminium horn gold (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | 1/6 Pilot "Garry" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Silicone adhesive ELASTOSIL® E4, tube/ 90 ml |
1 x | Spray YELLOW Inca Lexan 150ml |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 100m |
1 x | Carbon fibre sleeve 12k 170 mm x 5m |
3 x | Profile ABS half cane 4x1000 mm |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
3 x | USBCOM 5i |
2 x | Profile ABS half cane 8.0x1000 mm |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Cable tie mounts 4.3 (4 uds) |
2 x | Steering arm 12 mm Ø 4 mm (2 uds) |
3 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
3 x | CC 11 Conector |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | Landing gear frontal support 29x26x13,5 |
3 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
3 x | Lead with adhesive (2 pcs) |
2 x | Snap for floding prop for 2 mm axi |
2 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Snap short M2 (10 uds) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Tip wing protector 40x14 (2 pcs) |
3 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Wheel collar 5 mm Ø (4 uds) |
3 x | Cockpit plastic closing |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Steering arm 12 mm Ø 3 mm (2 uds) |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
3 x | SUS wire 3m (nylon coated) |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 28x5 mm wires output (2 pcs) |
2 x | Landing gear frontal support 25x32x16 |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
1 x | Threaded insert M5 (10 pcs) |
1 x | Blue Aluminium lock nut M2 (4 pcs) |
1 x | Blind nut M8 (10 pcs) |
1 x | Screw M4x20 (10 pcs) |
1 x | Hexagonal Nut M1 (10 pcs) |
1 x | Socket Head Screw M2x5 |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Floating M3 washer pad (36 pcs) |
1 x | Screw M2.5x5 (10 pcs) |
1 x | Nut for mounting M4 (4 pcs) |
2 x | Lock nut M5 (20 pcs) |
1 x | Blind nut M3 (4 pcs) |
1 x | Socket Head Screw M2x12 |
1 x | Aluminium M2x12 mm screw (4 pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Quadcopter Q50 Kit Carbon Fiber |
2 x | Flat washer 4.3 mm (20 pcs) |
1 x | APM2.6 Power module with 5.3V DC BEC |
2 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | 12 mm floating pad (49 pcs) |
1 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
1 x | 15 mm floating pad (30 pcs) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 silver pcs) |
2 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | 10 mm floating pad (72 pcs) |
2 x | U Profile ABS 3,0x6,0x1000 mm |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | EasyFLY Addon |
4 x | SIMtransmitter 6 Mode 2 |
3 x | Interface Realflight Simulator |
1 x | Red 4 mm connector holder |
1 x | XH male balance (9S) connector (2 pcs) |
1 x | XT-30 connector (pair) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | XT-60 connector (female) |
1 x | XT60 Connector with Holder Male 2pcs |
1 x | XH female balance (5S) connector (2 pcs) |
1 x | XH female balance (8S) connector (2 pcs) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Oracover Black 10 m |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | GameCommander USB Universal |
1 x | Interface Jack Adapter IKARUS |
1 x | Long horn 50x26 |
1 x | Rudder forward 90x28 "type Kato" |
2 x | 5 mm M2 variable horn |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Strip 2,0x2,0x330 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Round Rod 4,0x1000 mm |
1 x | Strip ABS 2.0x5.0x1000 mm |
2 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod M3 |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
1 x | HBC 10035-3 32-Bit |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
2 x | Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re |
1 x | Snap long M2 (10 uds) |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
2 x | Cockpit aluminium closing |
1 x | Cockpit metalic closing |
2 x | Cockpit aluminium closing 4.7g |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs) |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
2 x | Fully Threaded Steel Rod alumin 30 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
2 x | Covered closure or fairings |
2 x | Cockpit aluminium closing 5.4g |
1 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
2 x | Control for forward wheel (MINI) |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | ESC ALPHA 60A HV |
1 x | XH female balance (7S) connector (2 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Split M1,2x10 (10 pcs) |
2 x | Locking cable tie 2.5x100 (uds) |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | Split pin 1x8 mm (10 uds) |
1 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | Hexagonal Nut M1,6 (10 pcs) |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Lock nut M5 (10 pcs) |
1 x | Lock nut aluminium M2 (4 pcs) |
1 x | Anodized aluminium servo M4x5/8 screw (4 blue pcs) |
1 x | Lock nut M2 (20 pcs) |
1 x | Lock nut aluminium M3 (4 pcs) |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | Lock washer 3.2 mm (20 pcs) |
1 x | Circlik for shaft 3.2 mm (10 pcs) |
2 x | Flat washer 2.2 mm (20 pcs) |
1 x | Plastic caps for AIR BURTS (30 pcs) |
1 x | Rocket D9-7 |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Black silicone 0,25 mm² wire (25 m) |
1 x | PVC 0,08 qmm Futaba servos wire (5 m) |
1 x | Horn mando small (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Tapping Screw M2.2x65 (10 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Hexagonal Nut M4 (20 pcs) |
1 x | Servo BLS-M55B 61.2kg |
1 x | Tool for entel |
1 x | Slave-cable USB Easy Sim |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 30 cm BEC cable (female) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | 5 LiPo XH>EH adapter |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Cable Cargador FUTABA |
1 x | Oracover Black 2 m |
1 x | Tapping Screw M2.2x13 (10 pcs) |
1 x | Pan Head Screw M2x8 PH countersunk head |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | 20 mm carbon horn |
1 x | Extra long horn 60x30 |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Long adjustable aluminium control horn 2,8x24 |
1 x | Gear for D 200 BX |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Micro control horn (2 pcs) |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Propeller CFK 14.5x10 Slim |
1 x | Propeller CFK 13x7.5 |
1 x | Epoxy Resin L + Hardener LT kit/ 3125g |
1 x | Hysol Mixing Caps SET with 10 |
2 x | 100 mm rods set for direction control |
1 x | Propeller CFK 14x10 |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
1 x | Gear for MICRO BB |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | Servo Dymond D 37 Eco |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Adhesive epoxy structures RESOLTECH 3350 (1 kg) |
1 x | Wing bolts M3 Steel screw Red (2 pcs) |
1 x | Propeller CFK 17x18 |
1 x | Allen wheel collar M4x4 |
1 x | Epoxy MID-CURE™ 15 min (130g) |
1 x | Clip fixing for wing (2 pcs) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | One touch canopy lock |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | 140 mm rods set for direction control |
1 x | Rubber profile 6-2 mm 2M |
1 x | Cable grommet Ø 4 mm (4 uds) |
2 x | Rubber profile 8-2 mm 2M |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Propeller CFK 12X6 |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | 100 mm rods + T patellas set for direction control |
1 x | Propeller CFK 12.5x6.5 |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Epoxy Resin L + Hardener LT kit/ 895g |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Mixing tube for double syringes and cartridges (MR 1:1 and 2:1) |
2 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Propeller RF CFK 16x8,5 S |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Epoxy L 40 min. 10 kg (Resin) |
1 x | Propeller CFK 15x15 |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Epoxy SLOW-CURE™ 30 min (260g) |
1 x | Propeller CFK 13x9 |
1 x | Loctite HYSOL 9462 |
1 x | Cockpit latch closing I=10 mm |
1 x | Epoxy 5min KAVAN 2x 100g |
1 x | Cabin latch Fox MDM1 4m (pair) |
1 x | Electric Landing Gear RS-200 w/o programmer ULTIMATUM 2.0 (Elekt |
|
10,187.98EUR |