1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | 6 mm red aluminium threaded horn with patella |
3 x | Horn 13,5x16 mm (2 pcs) |
1 x | 5 mm M2 variable inclined horn |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Horn 20x28,5 mm (2 pcs) |
4 x | A/C quality beech plywood 600x300x0.8 mm |
3 x | Beech dowels 2.0 x 1000 mm |
2 x | A/C quality beech plywood 1520x750x3.0 mm |
2 x | BALSA trip 3.0x5.0x1000 mm |
2 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | A/C quality beech plywood 600x300x8.0 mm |
2 x | BALSA trip 10x10x1000 mm |
2 x | Balsa panel 2.0x100x1000 mm |
3 x | Balsa panel 6.0x100x1000 mm |
2 x | BALSA trip 2.0x2.0x1000 mm |
2 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
2 x | Balsa panel 10x100x1000 mm |
1 x | BALSA trip 6.0x6.0x1000 mm |
3 x | Balsa panel 8.0x100x1000 mm |
2 x | Balsa panel 3.0x100x1000 mm |
2 x | A/C quality beech plywood 600x300x0.6 mm |
3 x | BALSA leading edge 8x10x1000 mm |
1 x | Fast'n EZ-CA-Hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | ABS angle 5,0x5,0x1000 mm |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | 1/6 Pilot "Tony" |
1 x | Vest clothes Hispano Aviación |
1 x | M3/5Diam metal ball link V3 (2 pcs) |
1 x | Ballast 700gr OPALE |
3 x | Support FUEL DOT V3 |
2 x | Support XT60 conector (2 pcs) |
2 x | Head lower part New |
3 x | Cierva C30 Body Spain |
1 x | AC-10 pre-rotacion with motor |
3 x | 3 blades set |
2 x | Birch plywood plate 600x300x1.2 mm |
2 x | Birch plywood plate 600x300x2.5 mm |
3 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Propeller APC 10x4.7 SF |
1 x | 20x13 Falcon electric carbon prop (64g) |
1 x | Propeller APC 10x5.5 MR Electric multirrotor |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Micro control horn (2 pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Propeller APC 13x4 Electric Pusher |
3 x | RH long aluminium horn (2pcs) |
1 x | Propeller APC 11x5.5 Electric Pusher |
1 x | Small aluminium horn red (2pcs) |
1 x | Propeller APC 12x6 Electric Pusher |
2 x | Horn 16,5x20 mm (2 pcs) |
1 x | Small aluminium horn blue (2pcs) |
1 x | Horn with ball 40x30 |
2 x | Propeller APC 11x7 SF |
1 x | Propeller APC 12x8 SF |
2 x | 20,5x14,5 Falcon electric V2 (40 g) |
2 x | Control horn long w/ball |
1 x | Cable with accesories |
1 x | Extra long horn 60x30 |
1 x | Propeller APC 14x10 Electric |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Small aluminium horn gold (2pcs) |
1 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Propeller APC 10x4.7 |
1 x | Propeller APC 13x6.5 Electric |
1 x | Micro control horn T2 Ø 1 |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | Horn mando small (2 pcs) |
1 x | Propeller APC 13x10 Electric |
1 x | Short adjustable control horn 3x24 |
2 x | Horn mando long (2 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Reductora IPS 150 DX2BB-DXCS 9,7:1 |
1 x | 3 mm Prop Adapter M6 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | 12 mm portholes (10 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | ABS tube 5.0x4.0x156 mm |
3 x | ABS tube 3.0x1.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
2 x | ABS tube 4.0x2.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | ABS tube 16.0x14.0x1000 mm |
2 x | ABS tube 4.0x3.0x1000 mm |
1 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR) |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 29,0 mm propeller (left propeller) |
1 x | 3.17 mm Prop Adapter CN-Spinner |
1 x | 6 mm aluminium horn with patella |
1 x | 25 mm fenders (10 pcs) |
1 x | Propeller 9x4,7 SlowFlyer |
1 x | 6 mm M3 variable horn |
1 x | 28 mm turnbuckle |
1 x | 10 mm Prop Adapter M12 |
1 x | 3 mm Leader (L 100 mm) |
1 x | Birch plywood plate 600x300x3.0 mm |
2 x | Lite Plywood panel 600x300x2.0 mm |
1 x | Birch plywood plate 600x300x1.5 mm |
2 x | Beech dowels 10 mm x 1000 mm |
3 x | BALSA trip 8.0x8.0x1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
3 x | BALSA triangular 10x10x1000 mm |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
2 x | BALSA trip 3.0x3.0x1000 mm |
3 x | BALSA triangular 15x15x1000 mm |
2 x | BALSA trip 4.0x4.0x1000 mm |
2 x | Support Flush MPX Conector (6 pcs) |
1 x | Soporte filtro FESTO (4 pcs) |
2 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
2 x | ABS tube 10.0x8.0x1000 mm |
1 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | Recessed MPX connector support (6 pcs) |
2 x | Support pumb/filter Xicoy X45 |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Support conector MPX (6 pcs) |
2 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support Filtro FESTO |
1 x | Angle support XT60 conector |
1 x | Aro pasacable Ø25 mm (4 pcs) |
2 x | Screws M1,6x6 Allen |
2 x | Nut M2 securing |
1 x | Complet landing gear |
2 x | Baering 3x8x4 |
2 x | BALSA triangular 8x8x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Head upper part |
2 x | Blade Holder (3 blades) |
1 x | FALCON 28X10 CARBON PROPELLER (GAS) |
1 x | BIELA 25x10 WILGA Propellers |
1 x | 24x8 BIELA propeller |
1 x | 2 mm Prop Adapter M6 |
1 x | Remote electric ignition system |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | Propeller APC 12x4.5 MR |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | Propeller APC 10x6 Glow/Gas |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Tailormade cone A-10 Skymaster |
1 x | Smokelance |
1 x | Jet Pipe for A-10 Skymaster (set 2 pcs) |
1 x | Washer 2.2×4 |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | 3.2 mm Prop Adapter M6 |
1 x | 14 mm Portholes for screws (10 pcs) |
1 x | Antiaircraft gun 3.7 cm (5 pcs) |
1 x | Long adjustable control horn 3x34 |
1 x | Straightened rod Ø 0.5 mm x 1000 mm |
3 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Pine wood slat 3.0x7.0x1000 mm |
3 x | BALSA trip 5.0x5.0x1000 mm |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | Propeller APC 9x4.7 SF |
1 x | Propeller APC 8x3.8 SF |
1 x | Propeller FALCON 5-BL 24x23.5 |
1 x | Propeller APC 6x5.5 Electric |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | FIALA Propeller 25x10 |
1 x | FIALA 22X8 WOODEN 3-BLADE PROPELLER (GAS) |
1 x | FIALA Propeller 24x10 |
1 x | FIALA Propeller 23x8 |
1 x | White aluminium 230 mm landing gear |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Cooler motor type 300 |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Aero-Master Cabine (Aero-naut) |
1 x | MG cannon 1.8 cm (5 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | Indoor landing gear set |
1 x | Horns indoor |
1 x | Mudguard wheels 112/127 mm |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Parachute expulsion foam |
1 x | B4-0 rocket charges (6 pcs) |
2 x | ABS tube 7.0x6.0x1000 mm |
1 x | Propeller APC 11x8 Electric |
1 x | Propeller APC 10x7 Glow/Gas |
1 x | Propeller APC 10x5.5 MR Electric multirrotor PUSHER |
1 x | Propeller APC 11x5 Glow/Gas |
1 x | Propeller APC 12x6 Electric |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Propeller APC 11x4.7 SF |
1 x | Propeller APC 11x8.5 Electric |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Propeller APC 10x7 Electric |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Propeller APC 10x5 Electric Pusher |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Fod Guard 67x32 mm |
1 x | FOD Screen K140G/K180G/K210G |
1 x | JETCAT ADITIVO ANTIESTATIC 120ml |
1 x | Jet Pipe for ULTIMATUM 2m |
1 x | Cargador para AA/AAA Ni-MH & Ni-Cd |
1 x | FIALA Propeller 16x6 |
1 x | Ancla 35 x 22 mm (2 pcs) |
1 x | ABS 500 x 400 x 0,5 mm (white) |
1 x | 15x7 tree blades propeller LEFT |
1 x | Tail wheel for 8-12 kg models |
1 x | Tail gear set (60-120 class) |
1 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Tailwheel for 20/60 size |
1 x | Retract undercarriage |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
1 x | Tren de cola carbono 50-70cc |
2 x | A/C quality beech plywood 600x300x5.0 mm |
2 x | Pine wood slat 10x10x1000 mm |
1 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Head core bushing |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Propeller APC 10x3,8 SF |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | Lite Plywood panel 600x300x3.0 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x1.5 mm |
1 x | Balsa panel 1.0x100x1000 mm |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | A/C quality beech plywood 600x300x5.0 mm |
1 x | Blade holder center |
1 x | Blade holder upper |
1 x | Raer wall |
1 x | Blade holder lower |
1 x | Screws flush mount M2 |
1 x | Pine wood slat 5.0x5.0x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | Beech dowels 4.0 x 1000 mm |
2 x | Liston HAYA 10 x 10 x 1000 mm |
1 x | Plywood sheet BEECH 600 x 300 x 2,0 mm |
1 x | Birch plywood plate 600x300x2.0 mm |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Liston HAYA 3 x 10 x 1000 mm |
1 x | BALSA trip 2.0x10.0x1000 mm |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | A/C economy plywood 600x300x6+.0 mm |
1 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Steering lever |
1 x | Servo Fork |
1 x | Head core |
1 x | Screw M3x16 |
1 x | Nut M2 |
1 x | Head lower part |
1 x | Blades 330mm |
1 x | Bearing 3x6x2,5 |
1 x | Nut M1,6 |
1 x | Balls 4 mm |
1 x | Head runner |
1 x | Cierva C30 simulated motor |
|
4,846.97EUR |