2 x | Motor A2212/13T |
3 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Cap closure 33/23.5mm (2 uds) |
2 x | SUS wire 3m (nylon coated) |
2 x | Locking cable tie 4.6x203 (uds) |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Steering arm 12 mm Ø 4 mm |
3 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Stainless steel cable Ø 0.62 mm (10 m) |
2 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m |
2 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
2 x | Screw-lock connector Ø 2 mm (2 uds) |
2 x | Canopy Latch |
2 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Steering arm 16 mm Ø 4 mm (2 uds) |
2 x | Locking cable tie 3.2x142 (uds) |
1 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
3 x | One touch canopy lock |
4 x | Stainless steel cable Ø 0.5 mm (20 m) |
6 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Aluminum Bayonet / strongal D25 mm / 1 m |
2 x | Cockpit plastic closing |
2 x | Cierre cabina aluminio Ø4, I=10 mm |
4 x | Cierre cabina aluminio Ø5, I=16 mm |
1 x | Servo NARO Max Std |
1 x | |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
3 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | 2000A 12V Lithium Jump Starter with 150PSI Air inflator |
2 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | Short ball link M1.6 (6 uds) |
1 x | Ball link M2,5 (10 pcs) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Ferrita con funda |
2 x | Ferrita 14x8x5.5 mm |
2 x | Crimping tool |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
2 x | Flap hinge (6 pcs) |
3 x | Vacuum pump P1-N |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | Spinner Alumin. fixed propeller 40 mm / 5,0 mm |
2 x | Ball Link Plier |
1 x | 1,5x50 mm allen screwdriver |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | Screwdriver for Torx® TX6 |
2 x | Z Bender - S Type Tool |
1 x | Long pinned hinge (12 uds) |
1 x | 2,5x60 mm allen screwdriver |
2 x | Crimping tool |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | Small pinned hinge (12 uds) |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Hexagonal ball head 2.0 x 50 mm |
2 x | Starter 12v (Max 90 and 15ccm) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Long pinned hinge (6 uds) |
1 x | 18 mm reinforced hinge |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
3 x | Cut tube |
1 x | White smoke canister 65 g |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Oratex Natural White 2m |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Walnut wood slat 3.0x3.0x1000 mm |
1 x | KAVAN Hand crank fuel pump |
2 x | Split pin 1x8 mm (10 uds) |
3 x | Window mounting channel Type H 2.5x0.5 (2 m) |
3 x | Tip wing protector 30x10 (2 pcs) |
1 x | Lead with adhesive (2 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 70 mm M3 (2 pcs) |
2 x | Split M1,2x10 (10 pcs) |
1 x | Fully Threaded Steel Rod alumin 70 mm M2,5 (2 pcs) |
3 x | Snap short M2 (10 uds) |
2 x | Wheel collar 5 mm Ø (4 uds) |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
2 x | T- Fittings red color (2pcs) |
2 x | Window mounting channel 5m |
1 x | Press fitting for 1,0 diam. steel cable (10 pcs) |
2 x | Fully Threaded Steel Rod Duralumin 90 mm M3 (2 pcs) |
1 x | DLE 111 pipe plug |
2 x | Tip wing protector 28x10x12 (2 pcs) |
3 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
2 x | Fully Threaded Steel Rod Duralumin 100 mm M3 (2 pcs) |
1 x | Covered closure or fairings |
2 x | Tip wing protector 40x14 (2 pcs) |
3 x | FESTO connector M7 Quick 6mm 90º |
2 x | Landing gear frontal support 25x32x16 |
1 x | Fully Threaded Steel Rod alumin 50 mm M3 (2 pcs) |
2 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Pushrod octagone 4/3 |
3 x | Allen wheel collar M4x4 |
3 x | Cable grommet Ø 5 mm (4 uds) |
3 x | 38x4,5 mm wires output (2 pcs) |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
3 x | Snap pin for micro clevis (10 uds) |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | GLOW 9C + accesories |
1 x | Compact on-board starting system (9715) |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | Joint with bearing M3 22x5,5 |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Joint with bearing M2 22x5,5 |
1 x | Ball link M3 RPA's-UAV's |
2 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | M3 Maxi ball link (2 uds) |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | 25 mm Sandpaper file |
1 x | 3,0x60 mm allen screwdriver |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
2 x | Dust collector for mould cleaning |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
3 x | Miniature brass strap hinge, 1 m |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
2 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Gates hinge |
2 x | Spinner Alumin. fixed propeller 30 mm / 3,0 mm |
1 x | Copier 5x20 cm pcs |
1 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
2 x | Hot Glue Stick GREEN |
1 x | Tool for entel |
3 x | Welder 100W/200V |
1 x | Sealing Iron Profi LCD |
1 x | Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Angle of incidence meter |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Carbon Non-crimp ST 100 g/m² 50 cm x 10 m |
1 x | Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m |
1 x | Large flex hinge (12 uds) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Z Bender - S Type Tool |
1 x | Propeller diller for DLE111 and DA85-150 |
1 x | Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs) |
1 x | Starter 12v (Max 180 and 30ccm) |
1 x | Spinner NUT M5 |
2 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | ROBART POINT HINGE 4,7mm (5 pcs) |
2 x | Flap hinge 33x9 mm (6 pcs) |
2 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
2 x | |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
1 x | Spinner NUT M4 |
1 x | Roller cutter 28 mm |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Tachometer HANGAR 9 digital |
1 x | 15 mm reinforced hinge |
1 x | Spinner NUT M8x1,25 |
1 x | PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E |
1 x | Spinner NUT 1/4x28 |
2 x | 25 mm reinforced hinge |
1 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
1 x | Spinner NUT M6 |
2 x | Dean-T Plug Mold |
1 x | Copier 2x20 cm pcs |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Micro flex hinge (12 uds) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Hot Glue Stick RED |
1 x | Indoor hinge with servo arm integraded |
1 x | GPS Altis |
1 x | Propeller POWER-PROP 7x7 |
1 x | Fully Threaded Steel Rod alumin 100 mm M3 (2 pcs) |
1 x | Hovercraft sailcloth |
3 x | Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs) |
2 x | Tubo silicona transparente 7 x 3 mm (1m) |
2 x | Triple rod con. 3mm Pushrod (2 pcs) |
2 x | STEERING FRONT WHEEL SYSTEM BIDULE 111 |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
2 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Pushrod octagone 3/2 with coupler M2 |
2 x | 1000 cc gasoline fuel tank complet |
1 x | Quick hose connector 6-6 mm |
3 x | Fuel tank 500ml (17oz) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | Quick hose connector 4-4 mm |
2 x | 500 ccm complete gasoline fuel tank |
2 x | Pushrod greyline 3/2 with coupler M3 L: 1000 mm |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Slave-cable USB Easy Sim |
2 x | Aluminun wheel collar 6 mm Ø (4 uds) |
2 x | Fuel line plug Large 2 pcs |
1 x | Control for forward wheel (MINI) |
2 x | 280 cc gasoline fuel tank complet |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled |
2 x | Fuel Fittings-Red |
1 x | Hose clamps 0.16-0.20in, (4 pieces) |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | FESTO connector M7 barb fitting XL Tygon |
3 x | Clip fixing for wing (2 pcs) |
2 x | Tube holder |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Cable grommet Ø 4 mm (4 uds) |
1 x | 140 mm rods set for direction control |
1 x | 140 mm rods + T patellas set for direction control |
2 x | Triple rod con. 2mm Pushrod (2 pcs) |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Cable tie mounts 4.3 (4 uds) |
1 x | 28x5 mm wires output (2 pcs) |
1 x | 100 mm rods set for direction control |
2 x | Cable grommet 9.5 mm (4 uds) |
1 x | Wheel collar 3 mm Ø (4 uds) |
2 x | Wheel collar 3.5 mm Ø (4 uds) |
1 x | Aluminun wheel collar 2 mm Ø (4 uds) |
2 x | Aluminun wheel collar 3 mm Ø (4 uds) |
2 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | 90 mm rods + T patellas set for direction control |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Allen wheel collar M3x3 |
1 x | Clip mini fixing for wing (2 pcs) |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | 11 mm Rubber pads (14 pcs) |
1 x | Allen wheel collar M4x6 |
2 x | Conector FESTO G1/8 Quick 4mm 90º |
2 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | Extra hard 1500 ccm complete gasoline fuel tank |
1 x | Quick hose connector 6-4 mm |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Support 45% Hopper JetsMunt |
2 x | 500 ccm gasoline fuel tank |
2 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
2 x | 550 cc gasoline fuel tank complet |
1 x | Fully Threaded Steel Rod alumin 40 mm M2,5 (2 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Fuel Fittings-Blue |
2 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | T-Hose connector 4-4-4mm |
1 x | Allen wheel collar M3x5 |
3 x | Check valve quick hose connector 4-4 mm |
2 x | Fuel tank 1500ml (50oz) |
1 x | Y-Hose connector 4-4-4mm |
2 x | Wheel collar 2 mm Ø (4 uds) |
1 x | Pushrod octagone 3/2 |
2 x | Cockpit latch closing I=10 mm |
1 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | Electromotor starter EME 35cc |
1 x | Aluminium ignition bad (blue) |
1 x | GLOW 5C + accesories |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Sealing Iron Sleeve STD |
1 x | 55% silver electrodes (2 pcs) |
1 x | Vacuum pump 12 CFM |
1 x | Carbon plate 350x150x1.5 mm |
2 x | Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m |
1 x | Glass fibre sleeve Ø 20 mm |
2 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Carbon plate 350x150x2.0 mm |
1 x | Glass fabric 425 g/m² aero,10x1m |
1 x | Fiberglass 163 g/m² 1m x 5 m (Twill) |
1 x | Carbon plate 350x150x1.0 mm |
2 x | Peel ply 64 g/m² (plain weave) 150 cm x 10m |
1 x | PVC plate 320 x 194 x 0.23 mm (brown) |
1 x | Peel ply 95 g/m² (plain weave) 20 mm x 100 m |
1 x | Sheet Depron Aero 1250x800x3 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | FesEx-Uni6 System |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Tube bender |
1 x | Propeller electric carbon 8.5x6 |
1 x | Propeller electric carbon 10x7 |
1 x | Snap long M2 (10 uds) |
2 x | 100 mm rods + T patellas set for direction control |
1 x | Ferrita 17x10x6.5 mm |
1 x | Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs) |
1 x | Tailwheel for F3A size |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Carbon plate 350x150x5.0 mm |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
2 x | Glass fibre braided sleeve (45mm) roll 20m |
2 x | PVC grid straight 290x185x0.32 mm |
1 x | Glass fabric 49 g/m² (1,27 x 10 m) |
1 x | Carbon plate 550x350x4.0 mm ECOTECH |
1 x | Carbon plate 350x150x2.5 mm |
1 x | Fiberglass 280 g/m² 5000x1000 mm |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Fiberglass 163 g/m² 1m x 10 m (Aero, finish FK 144, plain) |
1 x | Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M |
1 x | Chopped glass fibre strands 3 mm |
1 x | Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m |
2 x | PET film Mylar® A 350, 50 cm, roll/ 5 m |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m |
1 x | Chopped glass fibre strands 0.2 mm |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 10m |
1 x | Glass fabric 49 g/m² (1,27 x 5 m) |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Styrene plate 320x120x1.0 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | Peel ply 93 g/m² (plain weave) 150 cm x 5m |
1 x | Teflon rollers 40 mm x 15 mm Diam. |
1 x | Sandwich carbon + poplar 4mm + carbon 480x290 mm |
1 x | Peel ply 64 g/m² (plain weave) 150 cm x 20m |
1 x | Sandwich carbon + poplar 3mm + carbon 290x160 mm |
1 x | Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m |
1 x | Teflon rollers 80 mm x 15 mm Diam. |
1 x | Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs) |
1 x | Glass fibre braided sleeve (45mm) roll 10m |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Tail support (2 pcs) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs |
1 x | Cable adapter iCharger |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Servo Fork |
1 x | Blades 330mm |
1 x | 3-blades 28x12 carbon prop Super Silence |
1 x | 3-blades 21x12carbon prop Super Silence |
1 x | Tool for entel |
1 x | Head core |
1 x | Nut M1,6 |
1 x | Side rudder |
1 x | |
1 x | Blade holder center GFK 0,5 mm |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
1 x | 12x6 tree blades propeller |
1 x | 8x6 tree blades propeller |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller electric carbon 10.5x6 |
2 x | ITRAP 40 (95ML) CLASSIC PRO, FESTO 4MM QS ELBOW CONNECTIONS |
1 x | Cockpit aluminium closing 4.7g |
1 x | Split pin 1.6x16 mm (10 uds) |
1 x | Debonder UN - CURE™ (30g) |
1 x | Cyano INSTA - CURE+™ (56g) |
1 x | Air Trap Mounting - 175ml |
2 x | Black "FUEL VENT" round aluminum overflow socket |
2 x | Hopper 125 ml XICOY with support |
1 x | Refueling kit for Cap "Red" |
1 x | Fully Threaded Steel Rod M2,0 (2 uds) 250mm |
1 x | Propeller POWER-PROP 12x6 |
1 x | Propeller POWER-PROP 14x12 |
1 x | Propeller POWER-PROP 10x7 |
1 x | Propeller POWER-PROP 13x9 Izda |
1 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm |
2 x | Fuel Station 20L |
1 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 4mm CLASSIC PRO |
1 x | Fuel tank fiberglass Easy Jet 2,2 l |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
2 x | Kerosene valve EVO Jet |
1 x | HOPPER tank INTAIRCO iTrap 50 175 ml 3x racor 6mm CLASSIC PRO |
1 x | Fuel station 20L incl. pump electric |
1 x | FuelTank Cap (red) |
2 x | Hopper 125 ml XICOY |
1 x | Hopper UAT Sebar 400 ml |
1 x | Cyano SUPER - GOLD™ Pocket (18g) |
1 x | Epoxy FINISH-CURE™ 20 min (130g) |
1 x | ExtraCA Top |
1 x | double Fuel Dot V2 (silver) |
1 x | EXTREME FLIGHT RED MAGNETIC ROUND FILLER PLUG |
1 x | "Taxi Tank" Fuel Tank |
1 x | Electron 22 mm Fitting barb |
2 x | Electronic double valve landing gear |
1 x | Cockpit aluminium closing 5.4g |
1 x | Fuel station 10L incl. pump electric |
1 x | 22m Fitting barb |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
1 x | QS Bulkhead Valve 4/4 mm |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Gas combustible tube |
1 x | Intairco CMB Super Filter - 6mm Barb |
2 x | Gas, Smoke Fluid or Kerosene Refueling Dry-Break Ports w/Return |
2 x | Fueling valve "Air" |
1 x | Hopper 125 ml INTAIRCO |
1 x | HOPPER tank Digitech 100 ml |
2 x | HOPPER tank INTAIRCO iTrap 30 PRO 3x FESTO 4mm 90º |
2 x | HOPPER tank Digitech 250 ml (Festo nipples 6 mm) |
1 x | ITRAP 50 (175ML) CLASSIC PRO, COMPRESSION BARB FITTINGS - SUIT X |
1 x | DC Small for MultiLog & UltraLight |
2 x | HOPPER tank INTAIRCO iTrap 40 95 ml 3x racor 6mm CLASSIC PRO |
2 x | Fuel Station 30L |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x racor 6mm CLASSIC PRO |
1 x | Gas or Kerosene Refueling Dry-Break Ports w/Return Line |
2 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | FUELING VALVE GASOLINE LARGE (1PC) |
2 x | Fuel tank grommet |
1 x | Maxi Fuel Filter |
1 x | Valvula One way |
1 x | 45 mm rods + T patellas set for direction control |
1 x | Epoxy QUIK-CURE™ 5 min (260g) |
1 x | Thread locker IC-Loc™ blue "medium" 10 ml |
1 x | Epoxy SLOW-CURE™ 30 min (130g) |
1 x | Catalyst INSTA - SET™ (235g) |
1 x | Deposito SECRAFT V2 1000 ml Gas |
2 x | EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG |
1 x | 1000 ccm complete gasoline fuel tank |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
2 x | 7.94 x 4.76 mm tygon tube 1 m |
2 x | Deposito DUBRO 1800cc-60oz |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | 1000 ccm gasoline fuel tank |
1 x | 1/4 x 1/8" VITON tube for gas, kerosene, smoke (30 cm) |
2 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Bob airtrap set |
2 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Deposito DUBRO 3000cc-100oz |
1 x | Pushrod octagone 4/3 with coupler M3 |
1 x | Press fitting for 0,5 diam. steel cable (10 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) knurled |
2 x | Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod alumin 30 mm M2,5 (2 pcs) |
2 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) |
1 x | HOPPER tank INTAIRCO iTrap 60 250ml 3x FESTO 90º 6mm CLASSIC PRO |
1 x | Refueling Cup V2 Red |
1 x | Fuel station 10L no include pump electric |
1 x | Tank gas KUZA 260 cc |
1 x | Fuel Dot for Glow/Gas conversion DUBRO |
1 x | Refueling Cup V2 Blue |
1 x | Hopper UAT Sebar 600 ml |
1 x | Fuel Dot (RED) |
1 x | Tygon tube 6.35 x 3.18 mm 15 m |
1 x | Tygon tube 4.8 x 3.2 mm 15 m |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | Double side nipple |
1 x | Tygon tube 4.8 x 3.2 mm 1m |
1 x | Tygon tube 7.94 x 4.7 mm 15 m |
1 x | FESTO Polyurethan tube for turbine 4x2,5x1000 mm (transparent) |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
1 x | diameter silicone tube for glow |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs) |
1 x | Precission dot for SAITO FA65/72/80/91S/100/120S/150S/180 |
1 x | Tubo silicona transparente 3.5 x 2 mm (1m) |
1 x | Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs) |
1 x | Fuel line plug Small 2 pcs |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | FESTO Polyurethan tube for turbine 6x4x1000 mm (transparent) |
1 x | Fuel line plugs (Black) |
1 x | TYGON tubo 15 m Diam. 3.4 x 2.0 mm |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | O-ring Saito FG-73 5cyl |
|
19,806.97EUR |