1 x | Round Rod 5,0x1000 mm |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
2 x | Strip 1,5x1,5x330 mm |
1 x | Large flex hinge (12 uds) |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Round Rod 1,0x1000 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
2 x | Gates hinge |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | ABS Strip 1.5x2.0x1000 mm |
3 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Round Rod 1,25x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | 15 mm reinforced hinge |
1 x | Strip 3,5x1,75x330 mm |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | 18 mm reinforced hinge |
1 x | Round Rod 4,0x1000 mm |
1 x | ABS Strip 1.5x6.0x1000 mm |
2 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
2 x | Micro flex hinge (12 uds) |
2 x | Gates hinge 30x16 mm (2 pcs) |
2 x | Small pinned hinge (12 uds) |
1 x | 25 mm reinforced hinge |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Strip 2,5x1,25x330 mm |
1 x | Mahogany wood slat 3.0x3.0x1000 mm |
1 x | Beech dowels 4.0 x 1000 mm |
2 x | Mahogany wood slat 1.5x1.5x1000 mm |
2 x | Pine wood slat 2.0x2.0x1000 mm |
2 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | BALSA triangular 15x15x1000 mm |
1 x | BALSA trip 3.0x3.0x1000 mm |
2 x | Pine wood slat 3.0x10.0x1000 mm |
2 x | BALSA triangular 10x10x1000 mm |
2 x | Pine wood slat 3.0x7.0x1000 mm |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Liston HAYA 10 x 10 x 1000 mm |
2 x | Trailing edge BALSA 35x8x1000 mm |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Pine wood slat 2.0x10.0x1000 mm |
1 x | Pine wood slat 6.0x6.0x1000 mm |
2 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | BALSA trip 4.0x4.0x1000 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Pine wood slat 3.0x5.0x1000 mm |
2 x | BALSA triangular 8x8x1000 mm |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Xplorer3 anemometro |
1 x | Xplorer2 anemometro |
1 x | 1/4 Pilot "Mike" |
2 x | 1/10 Pilot "Jimmy" |
2 x | 1/4 Pilot "Heidi" |
2 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
2 x | Piloto jet 130 mm |
3 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/12 Pilot "Langley" |
2 x | 1/6 Pilot "Buddy" |
2 x | Pilot "Goose" (Slimline) |
2 x | Pilot JAN 1/4 Saiplanes |
1 x | 1/7 Pilot "Japanese" |
2 x | Piloto RC Civil 1/5- 1/6 Scale 12" |
3 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Pilot "Adolf" Legends Series (Slimline) |
3 x | Piloto Jet "Red" 1/6 Scale |
2 x | Piloto Jet "Green" 1/6 Scale |
2 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Piloto JET 1:3,5 |
1 x | Presto SF Light Filler styrene-free (420 g) |
1 x | White smoke canister 140 g |
1 x | Angle support XT60 conector |
1 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | Round Rod 6,0x1000 mm |
1 x | Strip ABS 2.0x8.0x1000 mm |
2 x | Small flex hinge (12 uds) |
2 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
2 x | Round Rod 2,0x1000 mm |
1 x | Miniature brass strap hinge, 1 m |
2 x | Indoor hinge with servo arm integraded |
1 x | Beech dowels 2.0 x 1000 mm |
1 x | OBECHI sheet 2.0x3.0x1000 mm |
1 x | Pine wood slat 10x10x1000 mm |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
1 x | A/C quality beech plywood 600x300x6.0 mm |
2 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Liston HAYA 8 x 8 x 1000 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | A/C quality beech plywood 600x300x8.0 mm |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Lite Plywood panel 600x300x3.0 mm |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
2 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jack" |
2 x | 1/6 Pilot "John" |
1 x | 1/12 Pilot "Cougar" |
2 x | Crystal Universal RX 35.050 Ch 65 |
2 x | Crystal Universal RX 35.070 Ch 67 |
2 x | Crystal Universal RX 35.090 Ch 69 |
1 x | Pilot "Anthony" (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Piloto WWII USAAF 12" Scale 1/6 - 1/5 |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Futaba 38 mm servo arm with ball link |
2 x | Futaba 50/60 mm servo pull-pull double arm with ball link |
1 x | Futaba 24/30 mm servo pull-pull double arm with ball link |
1 x | Long pinned hinge (12 uds) |
2 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | LiPo Storage Box Standard 1 Type 1 |
3 x | Battery EMCOTEC LiIon 3000 7.2v |
4 x | Futaba 46 mm servo arm with ball link |
2 x | Futaba 52 mm servo arm |
2 x | XTorque CFK Servohebel 38 |
1 x | Hitec 38 mm servo arm with ball link |
2 x | Hitec 25 mm servo arm with M3 ball link |
2 x | Robart Door Hinge (Pk2) |
2 x | FUTABA 20 mm servo arm with ball link |
3 x | Futaba 38 mm servo arm |
2 x | Small pinned hinge (6 uds) |
3 x | XTorque CFK Servohebel 38 HITEC 25T |
2 x | Hitec 46 mm servo arm with ball link |
2 x | Futaba 30 mm servo rounded arm |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Futaba 25 mm servo arm with ball link |
2 x | Hitec 25 mm servo arm with ball link |
3 x | 54 mm Futaba servo arm tandem with ball link |
4 x | Hitec 30 mm servo rounded arm |
1 x | Horizontal mounting servo holder |
3 x | Futaba 76/92 mm servo pull-pull double arm with ball link HUB Al |
2 x | 17 mm servo arm with ball link DES Graupner |
3 x | Futaba 76/92 mm servo pull-pull double arm with ball link |
1 x | Hitec 52 mm servo arm |
1 x | Futaba 2x20 mm servo double arm |
1 x | Long pinned hinge (6 uds) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | Helices DJI Mavic Air STEALTH "Black" (4x Ud) |
1 x | Silicone 0,14 qmm servos wire Graupner (5 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Solvent Plasti Dip 1000 ml |
1 x | Plasti Dip Liquid Tape 429 ml orange |
1 x | Crystal Universal RX 35.020 Ch 62 |
1 x | 11 mm wing servo holder |
1 x | Electric Landing Gear F9F COUGAR |
1 x | 7 mm gas motor standoff |
1 x | Sandwich carbon + poplar 4mm + carbon 290x160 mm |
1 x | Sandwich carbon + poplar 2mm + carbon 480x290 mm |
1 x | PT 21x13 EL Propeller 3 Blade |
1 x | 1/12 Pilot "Tom" |
2 x | 1/6 Pilot "Tony" |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | ESC ALPHA 60A HV |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Crystal Universal RX 35.140 Ch 74 |
1 x | Crystal Universal RX 35.030 Ch 63 |
1 x | Transmitter Crystal 35 Mc/s Ch 77 |
1 x | Receiver Crystal 35 Mc/s Ch 62 |
1 x | Crystal RX 35.120 Ch 72 |
1 x | Crystal TX 35.180 Ch 78 |
1 x | Crystal Universal RX 35.040 Ch 64 |
1 x | Crystal Universal RX 35.170 Ch 77 |
1 x | Transmitter Crystal 35 Mc/s Ch 62 |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Crystal Universal RX 35.150 Ch 75 |
1 x | Crystal TX 35.010 Ch 61 |
1 x | Crystal TX 35.050 Ch 65 |
1 x | Crystal TX 35.100 Ch 70 |
1 x | Albatros red/white (Top Model) |
1 x | F-16 Scale 1:6 (1.630mm) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Electric Landing Gear Trainer Jet Intro |
2 x | 58 mm micro servo cover |
1 x | L-39 Albatros Scale 1:4.75 1991 mm |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | ASPIRE Red ARF 2.000 mm, Set Alas |
1 x | 20 mm tail wheel for 0,5-1 Kg models |
1 x | BULLIT Wing 1095 mm |
1 x | SERVO DES 806 Pignons |
1 x | Propeller MENZ-S 21x8 3-Blades |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | Propeller MENZ-S 18x6 |
1 x | Propeller MENZ-S 15x6 |
1 x | 16x8 BIELA propeller (4-blades) Corsair Scale |
1 x | Propeller MENZ-S 16x8 3-Blades |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | PVC 0,25 qmm servos wire Graupner (5 m) |
1 x | Quick hose connector 6-6 mm |
1 x | Gear set HITEC HS-55 |
1 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
1 x | 90x60 mm standart servo cover |
1 x | Servo TOPMODEL DS1413 T |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Futaba S9650/9670SV - Upper Case |
1 x | Servo DL3017 Digi 17Kg-0.15s/60º |
1 x | Servo FUTABA BLS175 SV |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Servo RHINO pro SHV digi 4 |
1 x | Hose clips 6 mm |
1 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Bujia OS G5 gasolina |
1 x | Servo MKS 6100 DS |
1 x | GLOW 5C + accesories |
1 x | Opto Gas Engine Kill Switch |
1 x | BOSCH spark plug cap for DA 50-R, DA 100 and DA 150 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | 6 mm M3 variable horn |
2 x | Brazo Servo XTorque 52 mm HITEC 25T-6 |
1 x | Rudder tandem for two Futaba servos |
2 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Ball Bearings for motor A60-V2 |
1 x | Propeller FALCON 27x10 3-BL carbono-gas |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Servo HBS 690BB HV Digital |
1 x | SERVO DES 806 Pignons |
1 x | SERVO DES 658 BB MG |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | 25x14 4Bl Scale |
1 x | diameter silicone tube for glow |
1 x | Propeller MENZ-S 18x10 3-Blades |
2 x | Futaba 20 mm servo arm |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | Propeller MENZ-S 21x8 |
1 x | Propeller MENZ-S 16x10 |
1 x | 1000 ccm gasoline fuel tank |
1 x | Propeller MENZ-S 15x12 |
1 x | 13 mm wing servo holder |
1 x | Servo FUTABA S 3072 HV S-Bus |
1 x | Futaba 14/20 mm servo pull-pull double arm with ball link |
1 x | Gear set HITEC HS-85 |
1 x | Starter EM Gear Power 80 |
1 x | Recess mount-rem. glow plug set |
1 x | Sparkplug NGK CM6 |
1 x | Servo Metal Horn 15.5 mm MKS |
1 x | Servo MKS HV6120H |
1 x | Sparkplug Champion RCJ-7Y for ZG |
1 x | Servo MKS HV1220 |
1 x | Servo MKS HV6130 |
1 x | Screwdriver for Torx® TX6 |
1 x | Ball link M3 (10 pcs) |
1 x | Spring clamp for tube Ø50 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | 3,9 mm ZG20-ZG38 servo arm |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
1 x | 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Ball link M2,5 (10 pcs) |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | DUPLEX 2.4EX Central Box 220 |
1 x | Blue "FUEL VENT" round aluminum overflow socket |
1 x | Servo Robbe FS 525 BB MG HV |
1 x | SERVO DES 707 BB MG |
1 x | Soporte metal para servos |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | BIELA 25x10 WILGA Propellers |
1 x | |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | 18x10 BIELA propeller SCALE (3-blades) |
1 x | 16x10 BIELA propeller (3-blades) |
1 x | Air Trap Mounting - 175ml |
1 x | 17x8 BIELA propeller |
1 x | Futaba 54 mm servo arm with ball link |
1 x | Propeller MENZ-S 16x8 |
2 x | HITEC 20 mm servo arm with ball link |
1 x | Propeller MENZ-S 15x10 |
1 x | double Fuel Dot V2 (silver) |
2 x | Adapter rotula M3 |
1 x | Vertical mounting servo holder |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | 16x8 BIELA propeller (3-blades) |
1 x | Propeller MENZ-S 18x8 3-Blades |
1 x | 18m Fitting barb |
1 x | 26x12D BIELA 3Bl propeller (3-blades) |
1 x | 17x10 BIELA propeller SCALE (3-blades) |
1 x | Double side nipple |
1 x | Deposito DUBRO 360 ml - 12 oz |
1 x | Extra hard 750 ccm complete gasoline fuel tank |
1 x | Propeller MENZ-S 18x10 |
1 x | "Taxi Tank" Fuel Tank |
1 x | Black "FUEL VENT" round aluminum overflow socket |
1 x | 24x8 BIELA propeller |
1 x | Y-Hose connector 6-6-6 mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Y-Hose connector 3-3-3 mm |
1 x | Festo Adaptor Tygon Large/4mm |
1 x | T-Hose connector 4-4-4mm |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | Servo GO-1073MGW 32 kg.cm 0.135s/60º |
1 x | Gear set HITEC HS-81 |
1 x | Servo HITEC D645 MW |
1 x | Servo HITEC D625 MW |
1 x | Servo FUTABA S 9670 SV |
1 x | Servo SAVOX SA-1258 TG |
1 x | Metal gear set for HS85MG/5085MG |
1 x | Servo HITEC D954 TW |
1 x | SAVOX SH 1290 MG servo digi |
1 x | Servo HITEC D-955 TW Titanium |
1 x | Servo HITEC HS-45 HB |
1 x | Futaba BLS152 - Upper Case |
1 x | Servo HITEC HS-45 HB, servo box |
1 x | Servo safety connector (10 pcs) |
1 x | SAVOX SH 1250 MG servo digi |
1 x | Horns set HS-65HB/MG, 5065MG |
1 x | Servo FUTABA BLS 276SV |
1 x | Savox Highvoltage Brushless Servo SB-2272MG (Tail rotor) |
1 x | Servo GO-1070MG 40 kg.cm 0.10s/60º |
1 x | Servo GO-1035MG 16 kg.cm 0.08s/60º |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Servo SAVOX SV-1254 MG HiVolt Low Profile |
1 x | Servo GO-12S69MG 26kg.cm 0.10s/60º |
1 x | Servo GO-1053MG 20 kg.cm 0.17s/60º |
1 x | Brazo servo aluminio HITEC HS-125MG/5125MG |
1 x | Servo HITEC D85 MG |
1 x | Servo TOPMODEL DS9010 T |
1 x | HITEC 17 mm servo arm with ball link HITEC |
1 x | SAVOX SH 0254 servo |
1 x | Servo GO-1088MGW 74 kg.cm 0.125s/60º |
1 x | Servo FUTABA HPS-A700 Digital S-Bus |
1 x | Blue Aluminium double servo arm V3-Hitec 3-3,5inch |
1 x | Metal gear set for HS81MG/5082MG |
1 x | USB programador GO servos |
1 x | Aluminium servo arm (2 uds) |
1 x | SAVOX SH 0255 MG servo |
1 x | Brazo servo KAVAN doble aluminio 25T - 2.5" M3 |
1 x | SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS) |
1 x | Servoarm SH-81, two sides, aluminium |
1 x | Futaba 25 mm servo arm with M3 ball link |
1 x | Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Servo HITEC D145 SW |
1 x | Servo GO-10S41MG 10.5 kg.cm 0.075s/60º |
1 x | DLE 111 pipe plug |
1 x | Brazo servo MKS Metal M3-L:30 (2 pcs) |
1 x | Aluminium ignition bad (blue) |
1 x | Servo MKS HV 777A+ |
1 x | Servo MKS 6100 DS |
1 x | Sparkplug Saito 400 |
1 x | EME 55 cc carburetor WALBRO |
1 x | Starter EM Gear Power 250 |
1 x | Sparkplug 1/4-32 |
1 x | Extension Arm for Carburetor |
1 x | Compact on-board starting system (9715) |
1 x | Sparkplug DLE CM6 |
1 x | Servo MKS HBL550 |
1 x | Spark motor OS nº 8 |
1 x | Suction funnel for carburetor 90D-L (red) |
1 x | GLOW 9C + accesories |
1 x | Sparkplug ROSSI R8 |
2 x | Reed valve for DA 50-R |
1 x | Suction funnel for carburetor WALBRO 20-80cc (blue) |
1 x | Brazo servo MKS X8 Metal L:1.25/1.5 inc |
1 x | SAITO FG-36 carburetor |
1 x | Selfstarr EME35 |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Compact on-board starting system (9512) |
1 x | Spark motor OS Type F |
1 x | Sparkplug 1/4-32 Glow |
1 x | Compact on-board starting system (9724) |
1 x | Ignition bed V2 Red color |
1 x | Compact on-board starting system (9713) |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | DLE 55 carburetor |
1 x | Servo MKS HV69 |
1 x | FesEx-Uni8 System |
1 x | Propadapter for motor A50-V3 |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Battery LiFe TopFuel 3100 mAh 4s MTAG 30C |
2 x | Propadapter for motor A60-V2 |
1 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
1 x | Shaft for A60-L V4 |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Carburetor for ZG45SL and ZG62/S/SL |
1 x | Horn 5/10 with M2 Bearing |
1 x | FesEx-Uni6 System |
1 x | Screwdriver for Hexagon 1,5mm |
1 x | 6 mm hexagonal ball link M3 (10 pcs) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | DUPLEX 2.4EX RC Switch |
1 x | Carburador DA-35, DA-50R-DA-100L , VM-60/70 |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Piston ring for DA-60 and DA-120 |
1 x | Tufnol Choke Lever Arm d=4,7mm |
1 x | Cylinder ZG 26SC/SLH |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Connectors banna oro 8,0 mm 5 pcs(Female) |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | A60-6XS V4 28-Pole |
1 x | Indoor motor holder |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
1 x | Cable adapter iCharger |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Horizontal servo holder |
1 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Covered closure or fairings |
1 x | Backmountset complete A40 |
1 x | Reed valve for DA-60/70 |
1 x | BOSCH spark plug cap for ZG 26SC/SCM, 231SLH, G230RC |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Xoar Electric Beechwood Prop 20x10 |
1 x | Horn 5/15 with M2 Bearing |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | FALCON 28X11 CARBON PROPELLER (GAS) |
1 x | Filler Gauges |
1 x | FALCON 24X10 CARBON PROPELLER (GAS) |
1 x | FALCON 25X9 CARBON PROPELLER (GAS) |
1 x | Propeller diller for DA50, DLE55 red |
1 x | Round flex hinge (12 uds) |
1 x | FALCON 27X11 CARBON PROPELLER (GAS) |
|
26,578.91EUR |