1 x | Ply-Span 450x600/13g White |
2 x | Small aluminium horn blue (2pcs) |
1 x | Xplorer4 anemometro |
1 x | Horn 5/20 with M2 Bearing |
2 x | 6 mm red aluminium threaded horn with patella |
2 x | Oratex Silver 2m |
1 x | Ply-Span 450x600/13g Black |
1 x | Horn 5/10 with M2 Bearing |
1 x | Horn 5/15 with M2 Bearing |
1 x | Oracover Verde 2 m |
1 x | Oracover ROYAL RED 2m |
1 x | Ply-Span 450x600/13g Yellow |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Xplorer2 anemometro |
2 x | Horn with ball 55x40 |
1 x | Oracover CHROME 2m |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Oratex Natural White 2m |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Ply-Span 450x600/13g Orange |
2 x | Ply-Span 450x600/13g Red |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Oracover Yellow CADMIO 2 m |
2 x | ORACOVER Ferrari red (2 m) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Small aluminium horn red (2pcs) |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
1 x | Oratex White 2m |
2 x | Oratex Red Fokker 10 m |
1 x | Oracover Green10 m |
1 x | Oracover Yellow CUB 2 m |
1 x | Oratex Antik 2m |
2 x | ORACOVER Fluor red (2 m) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Oracover Yellow CUB 10 m |
3 x | SlowFlyer control horn (3 pcs) |
1 x | Ply-Span 450x600/13g Blue |
1 x | Oracover Azul 2 m |
1 x | Oracover Brown 2 m |
1 x | Brass control horn M3 short for wire (2 pcs) |
1 x | Oracover White 2 m |
3 x | Oracover Azul Cielo 2 m |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Oracover Orange 2 m |
1 x | Oratex Yellow Cub 10 m |
1 x | PROFICOVER 5m |
1 x | Horn 6/27 with M3 Bearing |
2 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Oratex Natural White 20m |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Cable control set |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Horn 6/35 with M3 Bearing |
2 x | ABS tube 5.0x4.0x1000 mm |
1 x | ABS tube 7.0x6.0x1000 mm |
2 x | ABS tube 9.0x8.0x1000 mm |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
2 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | ABS tube 5.0x4.0x156 mm |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
2 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | CC 02 |
1 x | 4 LiPo XH>EH adapter |
1 x | 2 LiPo XH>EH adapter |
1 x | CC 01 |
1 x | CM-3 |
1 x | CC 05 |
2 x | TrainerCord (master-learner) |
2 x | 3 LiPo XH>EH adapter |
1 x | Adapter lead MPX/EC3 |
1 x | JETImodel SINGLE BEC |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | BEC 3A FOXY |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Dean "T" - Futaba Adapter |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Ball link M2,5 (10 pcs) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Horn mando small (2 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 20 mm carbon horn |
1 x | Adjustable brass horn threaded M3 |
1 x | Oracover Yellow CADMIO 10 m |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Support pump Xicoy X45 |
1 x | SIG Coverall 1.2x0.9 m |
1 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | SIG Coverall 1.2x4.5 m |
1 x | PVC lilac battery termo-retract 70 mm (10 m) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Pitot JETI |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | CC 03 |
1 x | Oracover CARBON Metalic 1 m |
1 x | Xplorer3 anemometro |
3 x | Ferrita 27x14x7 mm |
2 x | Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
2 x | NF-3X-80 liner Kit |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | ABS angle 6,0x6,0x1000 mm |
2 x | Ferrita 17x10x6.5 mm |
1 x | EasyFLY Addon |
1 x | GameCommander USB Universal |
2 x | ABS tube 14.0x10.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm) |
1 x | Steel Screw M1x8 (10 pcs) |
1 x | Rotorshape Autogyro |
1 x | AC-10 pre-rotacion with motor |
1 x | Screw M3x16 |
1 x | Head lower part New |
1 x | PSC 6 |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Cabling for Fox MDM1 wings |
1 x | Female connector for 6 pines AWG |
1 x | Extension 2/3 lipos JST/C |
1 x | Male connector for 6 pines AWG |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
1 x | SBEC 30 D |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | Switc electronic 30 Amp |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Micro control horn T2 Ø 1 |
1 x | Canopy Astra |
1 x | Rudder forward 70x28 "type Kato" |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | Small adjustable control horn with bearing |
1 x | Short adjustable control horn 3x24 |
1 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
1 x | Small control horn with bearing (2 pcs) |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
1 x | Rudder forward 90x28 "type Kato" |
1 x | Small aluminium horn gold (2pcs) |
1 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | Short extra-strong control horn with bearing 2,8x15 |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Balls 4 mm |
1 x | LA500 nose |
1 x | Head core bushing |
1 x | Head runner |
1 x | Complet landing gear |
1 x | Nut hélice Largo 2.25" (5.7 cm) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
2 x | Ferrita 14x8x5.5 mm |
1 x | X-RAY Micro QR (Rudder) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Flap hinge (6 pcs) |
1 x | Decorative caps, multicoloured |
1 x | Decorative caps, multicoloured, short |
1 x | Carbon fiber rod 5.0 mmx1000 mm |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | LA500 Blades |
1 x | Blade holder center GFK 0,5 mm |
1 x | LA500 pre-rotation gear hub |
1 x | LA500 Autogyro |
1 x | LA500 freewheel bearing |
1 x | Grub screw M3x3 shouldered (2 pcs) |
1 x | LA500 cyclic central part |
2 x | MAX BEC 2D plus EX |
1 x | 15 mm reinforced hinge |
1 x | NF-3X-350 set |
1 x | SPS 70V 140/280 A |
1 x | SPS 70V 100/200 A |
1 x | SBEC 40 |
1 x | DELPHIN Race 3.6m c64 |
1 x | Jet Afterburner Simulator NF-Jet4 RY |
1 x | DPSI Ampere battery backer |
1 x | Control horn long w/ball |
1 x | Oracover Black 2 m |
1 x | 35 mm gas motor standoff |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium ignition bad (blue) |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | 25 mm gas motor standoff |
1 x | 15 mm gas motor standoff |
1 x | Aluminium ignition bad (red) |
1 x | 20 mm gas motor standoff |
1 x | 40 mm gas motor standoff |
1 x | NF-1 RC set |
1 x | RH long aluminium horn (2pcs) |
|
8,641.33EUR |