1 x | DYNAMOMETER S-1580 |
2 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | M2 5Diam short black ball link V2 (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
2 x | Motor A2212/13T |
2 x | M3 Maxi ball link (2 uds) |
1 x | Xplorer4 anemometro |
1 x | Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Cap Hispano Aviación |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Joint with bearing M2,5 22x5,5 |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Connectors MPX male (PIN double) |
4 x | Connectors MPX male |
2 x | MPX Support |
1 x | PIN Connector female (100 pcs) |
2 x | Protector Connector MPX (1 pair) |
1 x | Protector Connector Dean-T (1 pair) |
1 x | Connectors MPX black female |
1 x | XH LiPo extension lead |
2 x | MPX screwable clips (4 pcs) |
1 x | Conector JR Servo female (10 pcs) |
3 x | 30 cm MULTIPLEX female connector |
3 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
2 x | MPX Support (2 pcs) |
5 x | Connectors MPX 8 pins with support (black) 1 pair (male-female) |
1 x | Magnetic Connect locking system |
1 x | Connectors MPX black male |
2 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
2 x | Conector JR Servo male (10 pcs) |
1 x | Wing conexion 2 servos Futaba 50 cm |
2 x | Connectors MPX female (PIN double) |
1 x | Bag connector 2 mm |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Connectors MPX female |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Red 4 mm connector holder |
1 x | Universal Colour Paste white 50 g |
2 x | Connectors banna oro 8,0 mm (M/F) |
1 x | XH female balance (4S) connector (2 pcs) |
1 x | Tape GFK 25 mm |
1 x | Beech dowels 2.0 x 1000 mm |
2 x | Conector FUTABA Servo female (10 pcs) |
1 x | Adapter rotula M3 |
1 x | MIG 29 3D RTF, Servo |
1 x | XT-60 connector (female) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | SE Ring 350 mm (2 pcs) |
3 x | Vest clothes Hispano Aviación |
3 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
5 x | Conector JR Servo female (10 pcs) |
3 x | MPX PCB "Gender-Changer (5 pcs) |
3 x | Kontronik connector (10 connectors, 5 pairs) |
1 x | MPX housing with flange (4 pcs) |
1 x | Wing conexion 2 servos JR/Graupner 50 cm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Red aluminium servo arm V2-Futaba 1,5" inch M3 |
3 x | Servo MKS 6100 DS |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Vacuum bag, 1200 mm x 50 m |
2 x | Spray adhesive AEROFIX 2 |
3 x | Paint gun for sprays |
2 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Glider Ka 7 Red (2540mm) |
1 x | 90x75 mm standart servo cover |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Servo HITEC D950 TW |
1 x | Mono-Switch Memory FUTABA |
1 x | Servo HITEC HS-5805 MG Digi |
2 x | Conector BEC male (10 pcs) |
1 x | Servo lock HS-80/81/82/85 (2 pcs) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Socket head long ball link M3 (2 uds) |
1 x | ALU servo arm 90º 3 mm shaft |
2 x | XH female balance (5S) connector (2 pcs) |
1 x | Motor PERMAX BL-O 3520-920 (Extra 330 SC) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
2 x | Xplorer3 anemometro |
1 x | Ball link M3 (6 uds) |
1 x | Peel ply 100 g/m² (plain weave) 50 cm x 2m |
2 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | Long ball link M1.6 (6 uds) |
1 x | Servo HITEC D951 TW |
1 x | Futaba Multi-Switch-Prop 12+2 MODUL |
1 x | Marker ties (20 pcs) |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Servo inverter |
1 x | Blue aluminium servo arm V2-Hitec 1,0 inch M3 |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
2 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | JETImodel SINGLE BEC |
1 x | SSPS105 Super Hi-Power servo |
1 x | Propeller diller for DLE170 |
2 x | Ball link M1.6 (6 uds) |
2 x | Joint with bearing M2 22x5,5 |
1 x | Propeller diller for EME35 and DLE35 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m |
1 x | Filler Gauges |
1 x | Futaba SBS-02A Air Pressure Telemetry Sensor (FASSTest/T-FHSS) |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Red 3m5 mm connector holder |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Red aluminium servo arm V3-Futaba 1,5inch M3 |
1 x | Module 2.4GHz T-FHHS "F" Series |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Extinguisher CO2 - 2 Kg |
1 x | FOXY G2 C3530-700 |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | ABS 500 x 400 x 1,5 mm (white) |
1 x | Battery FUTABA Li-Fe 2100 mAh 6.6v 4PLS/4PX/8J/10J/14SG/18SZ |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
2 x | Jeti Black cap |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Pipa BULL MØ1 2.600mm |
1 x | 150 Newtons FEMA absorber |
1 x | 54 mm Futaba servo arm tandem with ball link |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | 800TVL CMOS camera for FPV |
2 x | XH female balance (3S) connector (2 pcs) |
2 x | SE Ring 450 mm (2 pcs) |
1 x | Red aluminium servo arm V1-Futaba 1,0" inch M2 |
1 x | TrainerCord (master-learner) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Rudder 2_Tray 4~4.5 inch |
1 x | Futaba Radio Case |
1 x | Cyanocrylate MD GA460 odourless 20g |
1 x | Para-RC Mix |
1 x | UMX™ Whipit™ DLG BNF Basic (E-flite) |
2 x | Propeller diller for DA50, DLE55 red |
1 x | Ferrita 14x8x5.5 mm |
1 x | Joint with bearing M3 22x5,5 |
2 x | Long ball link M2 (6 uds) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
3 x | SE Ring 400 mm (2 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
2 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | X-RAY Micro QR (Elevator) |
1 x | Aramid 50 daN 50 m |
1 x | Hitec 52 mm servo arm |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Softshell Hispano Aviación |
1 x | XH male balance (8S) connector (2 pcs) |
1 x | PIX Hawk with accesories |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | BEC 3A FOXY |
1 x | Beech dowels 3.0 x 1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Short ball link M2 (6 uds) |
1 x | Red aluminium servo arm V2-Futaba 1,25" inch M3 |
1 x | Ferrita 17x10x6.5 mm |
1 x | Red aluminium servo arm V1-Futaba 1,25" inch M3 |
2 x | Short ball link M1.6 (6 uds) |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Aluminum Bayonet / strongal D25 mm / 1 m |
1 x | Thermoforming sheet 0.5mm (0.02in) DIN A4 |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
2 x | Futaba 32MZ 2.4GHz + R7108SB |
1 x | Ka 8 B (Top Model) |
1 x | Gold antispark 5,5 mm plug |
2 x | Futaba 20 mm servo arm |
1 x | CORTEX |
1 x | Servo Mount S (red) |
1 x | Wheel 38 mm V2 |
1 x | Hitec 20 mm servo arm |
1 x | Fiberglass plate 350x150x2.0 mm |
1 x | Foam plastic plates (310x210x2 mm) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | Styrene plate 320x120x0.5 mm |
1 x | Short ball link M3 (6 uds) |
1 x | Antenna FUTABA 2.4GHz 3PM/8FG/14SG/18SZ/18M |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
2 x | Avanti S 1.8m Jet White/Blue |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
1 x | LUCAS pilot ARTF |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Servo HITEC HS-485 HB |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
1 x | Servo holder for retract |
3 x | MIG 29 3D RTF Red Start SET + Gyro |
1 x | Foam plastic plates (310x210x8 mm) |
1 x | Gold antispark 4 mm plug |
1 x | Motor Mega AC 22/45/02 E |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Charger LiPo Charger4 |
1 x | HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program |
1 x | Avia spare fouselage CF reinforced (Top Model) |
2 x | LO 100 ARC 3.3m |
1 x | Blue aluminium servo arm V3-Hitec 1,25inch M3 |
2 x | XH male balance (4S) connector (2 pcs) |
1 x | Suction funnel for carburetor 90D-M (red) |
1 x | Adapter 3,0 mm M6 for spinner 40 mm fixed propeller |
1 x | Fixed launching hook |
2 x | Motor Mega AC CAR 10 PRO |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | 70x23 Ø3.5 mm aluminium core wheel |
1 x | Fiberglass plate 350x150x0.5 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver |
1 x | Race Outboard MERCURY type A |
1 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Servo HITEC HS-55 |
2 x | Conector Servo female 4 pines |
2 x | F9F Panther (Aero-naut) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Spray Graphit 33 |
1 x | Motor Mega AC 16/25/01E 3.17mm |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | Motor Mega AC 16/07/04 |
1 x | Optotronix Aurora Plug |
1 x | BABY glider (Aero-naut) |
1 x | Fiberglass plate 620x540x1,0 mm |
2 x | Towing hook |
1 x | 30 cm DEANS female connector |
1 x | Foam plastic plates (310x210x5 mm) |
1 x | MAX BEC |
1 x | Servo HITEC HS-45 HB |
1 x | Towing hook |
1 x | Wheel 75 mm with electromagnet and brake disk (2 uds) |
1 x | MPX screwable clips (5 pcs) |
1 x | Cylinder EME 35 cc |
2 x | THERMIK XL 4000 mm |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Ball link M3 (10 pcs) |
1 x | Extension 2/3 lipos JST - JST/C |
1 x | Tube Pitot to PIXHAWK |
1 x | Carbon plate 1000x500x2,0 mm ECOTECH |
1 x | Avia (Top Model) |
1 x | Servo HITEC HS-635HB Carbonite |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Disipador para motor Hacker B 20 (or motors up to Ø20 mm) |
1 x | Adapter 3,2 mm M5 for spinner 30 mm fixed propeller |
1 x | ALU servo arm 3 mm shaft |
1 x | Adapter 3,0 mm M5 for spinner 30 mm fixed propeller |
1 x | Shirt Hispano Aviación |
2 x | PVC grid diagonal 290x185x0.32 mm |
1 x | Anodized aluminium M4x0,7x20 mm screw (4 blue pcs) |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Futaba BLS152 - Upper Case |
1 x | Red aluminium servo arm V2-Futaba 17 mm iM2 |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Propeller MEJLIK 28.5x12 S-3 Blades |
1 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | Telemetry interface ALTIS 20 cm |
1 x | XH male balance (5S) connector (2 pcs) |
1 x | Hitec 30 mm servo rounded arm |
1 x | Blue aluminium servo arm V1-Hitec 1,25" inch M3 |
1 x | Altimeter Altis NAO |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Futaba Prop Module F14 |
1 x | Motor Mega AC 16/25/04 |
1 x | Motor Mega AC 16/25/02 |
1 x | Motor Mega AC 16/15/05 CE F5J |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | TopFuel LiPo 25C-ECO-X 350mAh 2S |
1 x | XH male balance (6S) connector (2 pcs) |
1 x | Long Switch On/Off micro |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Servo HITEC HS-65 HB |
1 x | 4" - 102 x 45 mm Ø5 mm aluminium core wheel |
2 x | Skyray (RBC Kits) |
1 x | Aluminium sheet 500x250x0,5mm |
1 x | HITEC DPC-11 programmer |
1 x | Axle for AXI 5345/xx motors |
2 x | MAX BEC 2 |
1 x | Motor Mega AC 16/15/02 |
1 x | 8 mm Adapter for AXI53xx |
1 x | ORACOVER Ferrari red (2 m) |
1 x | AXI 2820/10 V2 Long |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | Motor EME 70 cc |
1 x | Solvent Plasti Dip 1000 ml |
1 x | Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt) |
1 x | FesEx-Uni6 System |
1 x | EWC3 40 cm wing connector |
1 x | SE Ring 360 mm (2 pcs) |
1 x | BlueCom™ Adapter (Android / WP) |
1 x | UBEC 6A KAVAN |
1 x | 1 m servo "Premium" wire (white/red/blue) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
1 x | ABS tube 5.0x4.0x1000 mm |
1 x | Propadapter for motor A50-V3 |
1 x | DPSI OCP Overload protection |
1 x | Blocking screws M6 gas engine |
1 x | Hitec 38 mm servo arm |
2 x | F-104 Starfighter Y/B Aniversary(SebArt) |
1 x | Propeller MEJLIK 24x10 TH |
1 x | Red aluminium servo arm V3-Futaba 3-3,5inch |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Support hands Issuer PROFI TX |
1 x | Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Thermoforming sheet 0.3mm (0.039in) DIN A4 |
1 x | Motor OS 3820-1200 electric |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Flip ARF (Top Model) |
1 x | Glass fabric 49 g/m² (1,27 x 20 m) |
1 x | Breatex™ Non-woven absorber 300 g/m² Roll 41 m |
2 x | Tow hook for tug |
1 x | Servo HITEC HS-65 MG |
1 x | Servo HITEC HS-125 MG |
1 x | Motor Mega AC 16/35/01 |
1 x | Gear set HITEC HS-81 |
1 x | Motor MVVS 5.6/690 GLIDER |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | XT-60 connector (male) |
1 x | DINO Glider ARC |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | L-shaped servo mount |
1 x | Retract Landing gear ER40 Combo Custom complete |
1 x | FX three-position switched channel, long |
1 x | Single rim type C3 36/33,5/18,5 mm (pneumatics 55-70 mm) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | MOTOR MOUNT RODS AXI 53XX AND AXI 81XX 60MM (4PCS) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | DPSI Ampere battery backer |
1 x | SERVO DES 806 Pignons |
1 x | PVC transparent battery termo-retract 51 mm (1 m) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | CM-3 |
1 x | Rudder 2_Tray 4.5~5 inch |
1 x | Opto Gas Engine Kill Switch |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
2 x | SE Ring 250 mm (2 pcs) |
1 x | Futaba 30 mm servo rounded arm |
1 x | Propeller pad and output shaft EME 55/60 cc |
1 x | PVC yellow-orange transparent battery termo-retract 57 mm (1 m) |
1 x | 90x60 mm standart servo cover |
1 x | Conector BEC female (10 pcs) |
1 x | Oracover Yellow CUB 2 m |
1 x | PowerBox iGyro 1e |
1 x | Variable Flow Smoke Pump System |
1 x | LED blink wire flashing (white - 2pcs) |
1 x | CC 02 |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Propeller MEJLIK 22x10 |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | JETImodel Addcap 1640 |
1 x | Motor DLE 60 cc Twin |
1 x | Carbon plate 700x550x0.5 mm |
1 x | Servo HITEC HS-325 BB |
1 x | GS-200 Electronic |
1 x | 58x20 mm (2.25") axle Ø5 Type jets mm aluminium core wheel |
1 x | 40 mm servo arm with bearing (2 pcs) |
1 x | Spinner Alumin. propeller pleg. 30 mm / 4,0 mm |
1 x | Wheel 28 mm |
1 x | Batetia LiFe 3200 mAh 6.6v MPX PowerBox |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Male connector for 12 pines AWG |
1 x | Rescue 1,8m2 / BackPack |
1 x | Ball link M2 (10 pcs) |
2 x | Me-163 |
1 x | Straightened threaded rod M2-1m |
1 x | Motor Mega AC 22/35 4S |
1 x | Opto Gas Engine Kill Switch |
1 x | XPower XC3522/5 LS |
1 x | PowerBox MagSensor red connector |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Foam plastic plates (310x210x3 mm) |
1 x | PowerBox iGyro SRS + GPS Modul |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Fiberglass plate 620x540x0,3 mm |
1 x | Fiberglass plate 350x150x3.0 mm |
1 x | Motor Mega AC 16/07/06 |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | PowerBox Evo |
1 x | Axi for MVVS 3.5 Sport |
1 x | SE Ring 200 mm (2 pcs) |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | ESC RAY G2 R-60SB SBEC |
2 x | Stickers-digit for marking |
1 x | Retract undercarriage for gliders up to 3,5 Kg |
1 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
2 x | bavarianDEMON USB cable |
1 x | Axle wheel with accesories |
1 x | Carbon plate 350x150x0.5 mm |
1 x | AXI 2820/10 V2 |
2 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Beech dowels 10 mm x 1000 mm |
1 x | Motor Mega AC 16/15/07 |
1 x | Shaft for A60-20/22/24S (120 mm) |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | Buy Perforated film 100 cm / 50 m |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
1 x | LED blink wire flashing (blue - 2pcs) |
1 x | Wheel 115 mm with electromagnet and brake disk + E-Brake (2 uds) |
1 x | Tape GFK 38 mm |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | MPS Gas-Cap-Powerswitch |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | 1/4 Pilot "Mike" |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | 1/10 Pilot "Jack" |
2 x | 1/6 Pilot "Garry" |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Pilot "Goose" (Slimline) |
2 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | 1/6 Pilot "Buddy" |
1 x | Pilot "Anthony" (Slimline) |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Piloto Jet "Green" 1/6 Scale |
2 x | 1/7 Pilot "Japanese" |
1 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | 1/12 Pilot "Cougar" |
1 x | 1/4 Pilot "Heidi" |
1 x | 1/12 Pilot "Langley" |
1 x | Fox MDM 1 4000 mm Std. |
2 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
3 x | Fox 4000 mm with flaps (Airwold) |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Cable control set |
1 x | Brass control horn M4 short for wire (4 pcs) |
2 x | Horn with ball 55x40 |
1 x | Fournier RF-4D |
1 x | Fox MDM-1 ARF 3.5m Orange |
2 x | Small aluminium horn blue (2pcs) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Gobe R-26S (Airwold) |
2 x | SlowFlyer control horn (3 pcs) |
1 x | ASK 21 6.8m |
1 x | DG-303 ACRO 3750 mm (Airworld) |
2 x | ASW 20 5000 mm with winglets (Airwold) |
1 x | ASH 31 6.08m Composite Hollow Molded |
4 x | Cable with accesories |
2 x | Brass control horn M3 short for wire (2 pcs) |
2 x | GP 15 JETA |
2 x | Horn 6/20 with M3 Bearing |
1 x | 20 mm carbon horn |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
2 x | Horn 6/27 with M3 Bearing |
2 x | 6 mm blue aluminium threaded horn with patella |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
2 x | LS-8 GFK 6m Glider |
1 x | ASK 21 6.5m + pylona |
3 x | Fox 4000 mm Airworld,canopy frame |
3 x | Fox 4000 mm (Airwold) |
1 x | Fox MDM 1 4000 mm DeLuxe,Fundas deLuxe |
1 x | LO 100 Scale 1:2 - Modellbau Bruckmann |
2 x | RH long aluminium horn (2pcs) |
3 x | Brass control horn M2 short for wire (2 pcs) |
2 x | Fox MDM 1 4000 mm DeLuxe,cabina |
3 x | 6 mm aluminium horn with patella |
2 x | Horn 16,5x20 mm (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Fox MDM 1 4000 mm DeLuxe,wing joiner |
2 x | Horn 6/35 with M3 Bearing |
2 x | Horn 13,5x16 mm (2 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
2 x | T-shape holder metal LAMA |
1 x | Swashplate metal LAMA |
1 x | Flybar support metal LAMA |
1 x | Towing hook <3m |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | Servo SAVOX SW-1250 MG digi |
1 x | Futaba 38 mm servo arm |
1 x | Servo HITEC HS-5585MH |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | 50x45 mm micro-mini servo cover |
1 x | Red aluminium servo arm V1-Futaba 23 mm M2 |
1 x | USB programador GO servos |
1 x | 7 Servo SET 9g DS MG + Full servo extension cable set for Avanti |
1 x | Swift 5050 mm (Airwold) |
1 x | BLANIK 50 V2 Silver/Blue (SebArt), cabina |
1 x | Fox MDM 1 4000 mm DeLuxe,Fox 1:4 set of instruments for the f |
1 x | SZD-56 Diana-2 Carbon D-box wing |
1 x | Ventus 2cx 4.5 m Winglets |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm |
4 x | Adjustable brass horn threaded M3 |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm |
3 x | Rudder forward 70x28 "type Kato" |
2 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Antonov AN2 Scale 1/6 - 3m |
4 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | Rudder forward 80x28 "type Kato" |
1 x | Fox MDM 1 4000 mm DeLuxe,Panel instrument Fox MDM 4m |
2 x | LIBELLE Standard 3.8m D-box H-201 |
1 x | Short adjustable control horn 3x24 |
3 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 6 mm |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm |
2 x | Small adjustable aluminium control horn with bearing 2,8x15 |
1 x | 3 mm Leader (L 100 mm) |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | 3.2 mm Prop Adapter M8 |
4 x | Indoor hinge with servo arm integraded |
2 x | Medium extra-strong control horn with bearing 2,8x24 |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | SAGITA Alsema 4.0 m |
1 x | Extra long horn 60x30 |
3 x | Resistor 3W 5% OR47 |
1 x | Heat sink for Optotronix LEDs |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Cessna SKYLANE T182 1.75m - Seagull Model |
1 x | UHU hart 35 g |
1 x | UHU Por 50ml/40g |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Pegamento Pu R 50g polyuretano |
1 x | Horn 5/15 with M2 Bearing |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Kobuz 5000 mm (Airwold) |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | ASH 31 Mi Scale:1/3 - 7m |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | Horn 5/20 with M2 Bearing |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | 1/10 Pilot "Jimmy" |
1 x | Pilot WWII US Navy Pacific 12" Scale 1/6-1/5 |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Silicone 0,25 qmm servos wire Graupner (5 m) |
1 x | "Taxi Tank" Fuel Tank |
1 x | 100x50 mm SLH KOVO wheel |
1 x | 1/12 Pilot "Fighter" |
1 x | |
2 x | Rafale C (Aero-naut) |
1 x | BULLIT Wing 840 mm |
1 x | Equipment set XL |
1 x | CESSNA 50E White/Red |
1 x | F-104 Starfighter USAF (SebArt) |
1 x | ASG 32 560 mm |
2 x | SAGITA Alsema 3.0 m |
2 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 5 mm M2 variable inclined horn |
2 x | Set Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m |
2 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm |
1 x | 6x4 tree blades propeller |
1 x | 5 mm Prop Adapter CN-Spinner |
1 x | 50 mm white plastic spinner for fixed propeller |
1 x | 42 mm central piece for 4 blades |
2 x | 40 mm white plastic spinner for fixed propeller |
2 x | Horn 5/10 with M2 Bearing |
2 x | Horn mando long (2 pcs) |
1 x | Horn mando small (2 pcs) |
2 x | Sistema LDS - Ø12 mmr servos Ø 6/25 spline 60º (Futaba) pitch 6 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Paramotor BackPack XXS (without accessories) |
3 x | Brass control horn M2 large for wire (2pcs) |
2 x | Horns indoor |
2 x | Horn micro type4 Ø 0,5 (2 pcs) |
2 x | Rudder forward 90x28 "type Kato" |
2 x | Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm |
3 x | Brass control horn M2 long for wire (10pcs) |
2 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Micro control horn T2 Ø 1 |
1 x | Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm |
1 x | 6 mm M3 variable horn |
1 x | Micro control horn (2 pcs) |
1 x | Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 5 m |
2 x | Long horn 50x26 |
2 x | 5 mm M2 variable horn |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | 45 mm white plastic spinner for folding propeller |
1 x | 500 ml sealer (DOPE) |
1 x | 36 mm red plastic spinner for fixed propeller |
1 x | 42,0 mm propeller (rigth propeller) |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | 42 mm white plastic spinner for folding propeller |
1 x | 42 mm black plastic spinner for fixed propeller |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | 4 mm Prop Adapter M8 |
1 x | Autogyro Cierva C30 Spain |
1 x | 40 mm white plastic spinner for folding propeller |
1 x | 5 mm Prop Adapter M6 |
1 x | Small aluminium horn red (2pcs) |
1 x | Combo lighting module with covering drop shape |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Resistor 3W 5% 2R2 |
1 x | Piloto jet 130 mm |
1 x | Cover cap drop-shaped paintable 43 mm |
1 x | 3 LiPo XH>EH adapter |
1 x | BLANIK 50 V2 Silver/Orange (SebArt) |
1 x | Xplorer2 anemometro |
1 x | LO 100 ARC 3.3m,cabina |
1 x | Fox MDM 1 6000 mm |
1 x | 20 g tin paste |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Hot Glue Stick GREEN |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Aluminum Bayonet / strongal D35 mm / 1 m |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
2 x | PBY 6/6A Catalina (aero-naut) |
2 x | Canopy F9F Panther (Aero-naut) |
2 x | IMPULSE 2 F3F |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Spinner propeller pleg. 45 mm / 4,0 mm |
1 x | Spinner plastic white fixed propeller 30 mm |
1 x | Spinner propeller pleg. 36 mm / 6,0 mm |
1 x | Spinner propeller pleg. 40 mm / 4,0 mm |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Dumper propeller 6/8 mm |
1 x | Mounting base Ms 12 mm |
1 x | Anchor 80 mm (2 uds) |
1 x | Ancla Admiralsanker 70 mm (2pcs) |
1 x | Alfileres de cobre 0,7 x 7 mm, aprox.50 g |
1 x | Spannlack 1000 ml |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
1 x | Blade holder metal LAMA |
1 x | Bateria LRP 2200-7.2v 6 cell NiMH |
1 x | Mini AVANTI S EDF 80MM RTF Combo Lipos 5000-6s (SebART) |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
1 x | PBY 6/6A Catalina, Observer´s dome (L + R) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Cotton Flocks, bag/ 500 g |
1 x | White spinner propeller pleg. 36 mm / 4 mm |
1 x | 36 mm white plastic spinner for fixed propeller |
1 x | Spinner propeller pleg. 42 mm / 4,0 mm |
1 x | Horn for flap control (1 pcs) |
2 x | 6 mm M3 variable inclined horn |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Mini Avanti S 1.4m white/red |
1 x | Avanti S 1.8m Jet White/Blue + Landing gear |
1 x | Mig-29 "FULCRUM" (RBC Kits) |
1 x | de Havilland Vampire (Rc Factory) |
1 x | MB-339 Aerofoam G2 "Italian Air Force Camu" |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear |
1 x | Mini Avanti S 1.4m blue/white/red CLASSIC |
1 x | Mini AVANTI S EDF 80MM RTF |
2 x | Horn with ball 40x30 |
1 x | Spinner 4BL 4 blades pleg. prop 40 mm / 4,0 mm |
1 x | Spinner propeller pleg. 36 mm / 4,0 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | White spinner propeller pleg. 55 mm / 5 mm |
1 x | Spare white 38-45 mm spinner |
1 x | White spinner propeller pleg. 42 mm / 5 mm |
1 x | Spare white 36-38 mm spinner |
1 x | Spinner fold propeller 50-55 mm (white spare spinner) |
1 x | Spinner propeller pleg. 42 mm / 5,0 mm |
1 x | Blades 330mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Long extra-strong control horn with bearing 2,8x34 |
1 x | Control horn long w/ball |
1 x | Aero-Master (Aero-naut) |
1 x | Railing 5x100 mm |
1 x | 3,2 mm Prop Adapter M6 |
1 x | 3.2 mm Prop Adapter M6 |
1 x | Tirpiz Battleship 1:200 |
1 x | 4 mm Prop Adapter M6 |
|
132,758.59EUR |