1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
4 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Ball Link ALU M3 - RH (1 pcs) |
2 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
2 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
4 x | Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds) |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
3 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
2 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Spring lock washer 2.6 mm (20 pcs) |
1 x | Quicklock washer 1 mm (10 pcs) |
2 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
2 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Lock washer 2.7 mm (20 pcs) |
2 x | Circlik for shaft 1.9 mm (10 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
1 x | JETImodel SINGLE BEC |
2 x | CC 05 |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | MPX-Dean "T" Adapter |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Futaba External voltage input cable Futaba CA-RVIN-700 |
2 x | CM-3 |
1 x | TrainerCord (master-learner) |
1 x | CC 02 |
1 x | 3 LiPo XH>EH adapter |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
2 x | Cabel charger transmitter GRAUPNER |
3 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 5 LiPo XH>EH adapter |
2 x | 4 LiPo XH>EH adapter |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Adapter lead MPX/EC3 |
1 x | Circlick securite |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
1 x | CC 03 |
1 x | 30 cm BEC cable (male) |
1 x | Pine wood slat 3.0x5.0x1000 mm |
1 x | Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs) |
1 x | Switch Cap L (silver) |
1 x | Futaba Neckstrap |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs) |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
3 x | Wire easy tensioner (red) |
2 x | Rubber bushing with bracket "A" type (2 pcs) |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | wire tensioner (blue) |
1 x | Wire easy tensioner (silver) |
3 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Turnbuckle M2,5x32/48 (2pcs) |
3 x | wire tensioner (silver) |
2 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Quicklock washer 3 mm (10 pcs) |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
1 x | Socket Head Screw M2x12 |
2 x | Pan head screw M2x16 PH |
1 x | Servo M2x9/16 screw (4 pcs) |
1 x | Legs + electric brakes for Viper Jet 90 |
2 x | Socket Head Screw M2x10 |
1 x | Screw M3x16 (10 pcs) |
1 x | Servo NARO Max Std |
1 x | Servo M2x7/16 screw (4 pcs) |
1 x | Spring pin Ø 2 x 6 mm (10 pcs) |
1 x | Fiberglass landing gear for 140-160 |
1 x | Digital scale up to 40 kg |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Copier 5x20 cm pcs |
1 x | Cut tube |
1 x | Screw M4x12 (10 pcs) |
1 x | Nylon Screw M5x30 |
2 x | Bearing block for noseleg landing gear |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Screws 2,2 x 6,5 mm (20 pcs) |
1 x | Indoor landing gear set |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Screw M3x30 (10 pcs) |
1 x | Pan Head Screw M2x6 PH |
1 x | Nut for mounting M4 (4 pcs) |
2 x | Threaded insert M6 (10 pcs) |
1 x | Nylon Screw M6x40 |
2 x | Switching module high voltage SXH |
1 x | MPS Gas-Cap-Powerswitch |
2 x | Switc electronic 30 Amp |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | M3 black washers (4 pcs) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
2 x | Short Switch On/Off micro |
2 x | Selfstart electronic switch |
1 x | SBEC Jeti |
1 x | Aluminium wide washer M3 red (4 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | CC 11 Conector |
2 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
4 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
3 x | ABS tube 20.0x18.0x1000 mm |
3 x | ABS tube 5.0x4.0x1000 mm |
1 x | Round Rod 1.0x3.5 cm |
1 x | Threaded coupler M2 (10 uds) |
2 x | Turnbuckle M3 33x49 (2pcs) |
2 x | ABS tube 5.0x3.0x1000 mm |
3 x | ABS tube 10.0x8.0x1000 mm |
2 x | Turnbuckle M1,6x20/30 (2pcs) |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
2 x | Turnbuckle M2x22/35 (2pcs) |
2 x | Stainless steel 3 m Pull-Pull complet set (max 20 kg) |
1 x | wire tensioner (black) |
2 x | Turnbuckle M1,6x17/27 (2pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
2 x | Pulley brass 8/2 (2 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Turnbuckle M2,5x27/43 (2pcs) |
2 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
1 x | Threaded coupler M2 (10 pcs) |
2 x | Turnbuckle M2x29/43 (2pcs) |
2 x | Clevis plastico I=44 mm / hole 3mm / pin 2 (2 pcs) |
1 x | Telemetry interface ALTIS 6 cm |
1 x | |
1 x | Ball Link Plier |
1 x | Support Pitot JETI |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support conector MPX (6 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | 20x10 BIELA propeller (3-blades) |
1 x | 24x10 BIELA Sport 3Bl propeller (3-blades) |
1 x | Socket Head Screw M2x8 |
1 x | Threaded insert M3 (4 pcs) |
1 x | Anodized alum. M4x0,7x25 mm Button Head screw (4 blue pcs) |
1 x | Titanium M3x0,5x8 mm Flat Head screw (4 pcs) |
1 x | Nose leg 155 mm with wheels 70 mm |
1 x | FESTO connector M5 Quick 4 mm |
1 x | PSC 6 |
1 x | Female connector for 10 pines AWG |
2 x | Double conector with JR adapter and 200 mm extension |
1 x | Soporte filtro FESTO (4 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Tapa estado carga XT-60 (6 pcs) |
1 x | Support Filtro FESTO |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Support FUEL DOT V3 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
1 x | 23x10 BIELA propeller |
1 x | 19x10 BIELA propeller (3-blades) |
1 x | 28x10 BIELA propeller |
1 x | 22x12 BIELA propeller (3-blades) |
1 x | Lock nut M2.5 (10 pcs) |
1 x | Lock nut M2 (10 pcs) |
1 x | Nylon Screw M4x20 |
1 x | SU 29S 140 carbon landing gear |
1 x | Sprung retractable undercarriage (Alfa model) |
2 x | Pulley brass 14/2 (2 pcs) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Conector FESTO G1/8 Quick 4mm 90º |
1 x | Conector FESTO M3 Quick 3mm 90º |
1 x | Axle wheel with accesories |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | FESTO Filter 4 mm |
1 x | QS Bulkhead Valve 4/4 mm |
2 x | BEC 3A FOXY |
1 x | Extension 5 lipos JST/C |
1 x | wing/fuselage connector for 6 pines AWG 20-24 (without pines) |
1 x | EWC3 40 cm wing connector |
1 x | TMM 1210-3S heli |
1 x | Multi-adapter balancer JST - TP |
1 x | PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF |
1 x | wing/fuselage connector for 16 pines AWG 20-24 |
1 x | Bec MR UBEC 5A (5v/6v/7v) |
2 x | A60-6XS V4 28-Pole |
2 x | Motor A60-5XS V4 28-pole kv420 |
2 x | FA27.2×8.9 Prop-2PCS/PAIR |
2 x | Axi for motor A40-L Motor 8-Pole-Electric Turbine |
2 x | A50 Backmountset complete |
2 x | Motor A200-8 |
1 x | Motor A10-7 L 4,4:1 |
1 x | Motor A40-10S V4 14-Pole |
1 x | Motor A50-16 S V4 |
1 x | Motor A200-6 |
3 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
2 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
3 x | ABS tube 7.0x6.0x1000 mm |
1 x | Porta Kwik link M3 3 mm (2 pcs) |
1 x | Pulley brass 6/1,5 (2 pcs) |
1 x | Pin 3,0 to cable coupler M3,0 ⌀ (6 pcs) |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
2 x | ABS tube 18.0x16.0x1000 mm |
2 x | ABS tube 12.0x10.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø3 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
3 x | ABS tube 8.0x7.0x1000 mm |
2 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
3 x | ABS tube 6.0x5.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm) |
1 x | Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm) |
3 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | CF tube (L 1000 mm, Ø1 mm, Ø0,5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm) |
3 x | ABS tube 9.0x8.0x1000 mm |
1 x | Carbon tube (L 2000 mm, Ø16 mm, Ø14 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m) |
1 x | CF tube (L 1000 mm Ø030 mm, Ø26 mm) |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Fiberglass tube 6/4x1000mm |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm) |
2 x | ABS tube 3.0x2.0x330 mm |
1 x | KAVAN Threadlocker - Blue 10ml |
1 x | Microbalon filler for CA glues. Packaging bottle 20g |
1 x | Debonder CA 20g |
1 x | Black large kwik link (10 pcs) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Glass Bubbles (0.12g) 400 G (aproxx 3.3 l) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | CA Glue (medium) 20g |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
2 x | ESC ALPHA 60A HV |
1 x | DPS Switch JR/JR |
1 x | Connector Sub-D 2+5 Female |
1 x | wing/fuselage connector for 12 pines AWG 20-24 |
1 x | Axle for motor A20-S (3 uds) |
2 x | Motor A60-7XS V4 28-pole kv330 |
1 x | Motor A20-20 L EVO |
1 x | Motor A30-14 M V2 6 Poles |
1 x | Parachute XTRALITE S |
1 x | Motor A50-14L Turnado V3 Glider |
1 x | Motor A30-14 L V4 |
1 x | Motor A20-22 L EVO |
1 x | Motor A30-12 XL Glider |
1 x | P 17×5.8 Prop-2PCS/PAIR |
3 x | ABS tube 4.0x3.0x1000 mm |
1 x | Porta Kwik link M4 4 mm (2 pcs) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
2 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 14.0x10.0x1000 mm |
2 x | ABS tube 5.0x4.0x156 mm |
1 x | Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | ABS tube 16.0x14.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Thixotropic agent TM 100, tin/ 75 g (approx. 1 l) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 675g |
1 x | Cable coupler M3 (10 uds) |
1 x | Cotton Flocks, bag/ 7 Kg |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Cable coupler M3 (10 uds) |
1 x | resin-hardener L-385 H-385 (1250 g) |
1 x | Bearings for motors hacker A50 |
1 x | Motor A30-12 L V4 |
1 x | Motor A20-20 L EVO |
1 x | Motor A50-12 L Glider |
1 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Motor A40-14 L 14-Pole V4 |
1 x | A30-M/L/XL Backmountset complete |
1 x | Backmountset complete A40 |
1 x | Motor A50-10L Turnado V3 Glider |
1 x | Axle for motor A30-XL V2 |
1 x | A50 Backmountset complete V3/V4 |
1 x | Motor B20-10 L + 4:1 gearbox |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Motor A20-26 M EVO |
3 x | ABS tube 3.0x2.0x1000 mm |
3 x | ABS tube 4.0x2.0x1000 mm |
1 x | Kwik link with arm M5xM2,5xL30 |
1 x | Micro clevis 0.8 mm(10 uds) |
1 x | Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Kwik link aluminio M3 L:30mm (6 uds) pinØ1.6mm Left |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs) |
1 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
1 x | Metal clevis M2,5 (10 uds) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm) |
2 x | ABS tube 8.0x6.0x1000 mm |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm) |
1 x | Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm) |
1 x | Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm) |
2 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø21 mm) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm) |
1 x | Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm) |
2 x | ABS tube 9.0x7.0x1000 mm |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | Ciano KAVAN Medium 20g |
1 x | Ciano KAVAN Thin 20g |
1 x | Ciano KAVAN Super Thin 20g |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Cable coupler M2 (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Thixotropic agent tin/ 15 g (approx. 350ml) |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | White large kwik link (10 pcs) |
1 x | Small kwik link (10 pcs) |
1 x | Hardener Aero EPH 161 (500 g) |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
1 x | Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g |
1 x | Cotton Flocks, bag/ 500 g |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | CA Glue fast 20g |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | Epoxy Resin L + Hardener CL (60 min) kit/ 930 g |
1 x | Angled clevis with threaded rod M3 |
1 x | Cable coupler M2 (10 uds) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
|
16,383.32EUR |