1 x | Extension silicon 30 cm female (Graupner) |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Double conector with JR adapter and 200 mm extension |
1 x | Extension S-Bus 1-2 silicon 120 cm FUTABA |
1 x | Strip 2,5x1,25x330 mm |
1 x | ABS tube 14.0x10.0x1000 mm |
1 x | USB Mini Camera endoscope |
1 x | 30 cm BEC cable (female) |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | MPX Sub-D Adaptor |
1 x | 55% silver electrodes (2 pcs) |
1 x | DPS Switch JR/JR |
1 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | MAX pilot ARTF |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Round Rod 1,25x1000 mm |
1 x | 2 LiPo XH>EH adapter |
2 x | Connectors DEANS (T) |
1 x | ABS tube 16.0x14.0x1000 mm |
2 x | Conector JAPAN G2 Set 5 pares |
2 x | Horn with ball 55x40 |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
1 x | Conector FUTABA Servo male BLUE silicon (10 pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | Brass rod Ø 1.5 mm x 1000 mm |
1 x | ABS tube 20.0x18.0x1000 mm |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Conector JR Servo female (10 pcs) |
1 x | Set cintas unión paracaídas 145 cm |
1 x | XH male balance (3S) connector (2 pcs) |
1 x | Horn 5/15 with M2 Bearing |
1 x | Fixed launching hook |
1 x | Aramid 50 daN 50 m |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Prolongador S-Bus JR/JR 20cm |
1 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Interface Jack Adapter IKARUS |
1 x | Parachute PV6 for F3J |
1 x | Vacuum bag, 1200 mm x 50 m |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Connectors DEANS (T) micro |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Round Rod 6,0x1000 mm |
1 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | 3,0x60 mm allen screwdriver |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Spinner propeller pleg. 30 mm/5,0 mm/0º |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Gates hinge aluminium (1 pcs) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Extinguisher CO2 - 2 Kg |
1 x | Ventus 2cx 4.5 m Cabling wings |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
1 x | Connectors MPX black female |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | 15 mm reinforced hinge |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
1 x | Extension PVC 150 cm (Graupner) |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | Horn 6/35 with M3 Bearing |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Tow hook for tug |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | 2,5x60 mm allen screwdriver |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
1 x | ORACOVER Fluor red (2 m) |
1 x | CC 05 |
1 x | Conector FUTABA Servo female (10 pcs) |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | ABS tube 4.0x2.0x1000 mm |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear ELECTRO |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Motor DLE 170 M- Paramotors |
1 x | Threaded coupler M2 (10 uds) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | ABS tube 5.0x4.0x156 mm |
1 x | Couple M4 for wire (10 pcs) |
1 x | ABS tube 9.0x8.0x1000 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
1 x | Conector JR Servo male (10 pcs) |
1 x | Circlick securite |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Paramotor Trike XL |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Horn DUBRO 1/2A |
1 x | Oracover CARBON Metalic 1 m |
1 x | CM-3 |
1 x | Windsock Ozone L - 700 mm |
1 x | Strip 3,5x1,75x330 mm |
1 x | Connectors banna oro 8,0 mm (M/F) |
1 x | Conector FUTABA Servo female BLUE silicon (10 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Digital precision scale up to 2000 g |
1 x | XT-30 connector (pair) |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Prolongador S-Bus JR/JR 10cm |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | 25 mm reinforced hinge |
1 x | Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm) |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Round Rod 1,0x1000 mm |
1 x | Oracover Black 2 m |
1 x | Thinwall Stainless Steel Tubing 28x0.6x1000 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | Conector FUTABA Servo male (10 pcs) |
1 x | Extension silicon 10 cm (Graupner) |
1 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | Brass rod Ø 0.5 mm x 1000 mm |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m |
1 x | Hovercraft sailcloth |
1 x | Oracover Azul 2 m |
1 x | 30 cm MULTIPLEX female connector |
1 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | XT-60 connector (female) |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Round Rod 5,0x1000 mm |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Copier 2x20 cm pcs |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Horn 6/27 with M3 Bearing |
1 x | Extension silicon 25 cm (Futaba) |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Digital weight, angle and balance meter BASIC |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Round Rod 1,5x1000 mm |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | Horn for flap control (1 pcs) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
1 x | Extension silicon 100 cm (Futaba) |
1 x | XH female balance (2S) connector (2 pcs) |
1 x | Conector JR/Uni Servo female BLUE silicon (10 pcs) |
1 x | ASH 31 6.08m Composite Hollow Molded |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | Connectors MPX female |
1 x | 18 mm reinforced hinge |
1 x | Circlick securite |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Oracover Azul Cielo 2 m |
2 x | Connector CAN 15 |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Gold antispark 4 mm plug |
1 x | Paramotor BackPack XXS 2 |
1 x | Cable with accesories |
1 x | Flap hinge (6 pcs) |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | Conector JR/Uni Servo male BLUE silicon (10 pcs) |
1 x | Extension silicon 35 cm (Futaba) |
1 x | 100g Flux Paste for Silver Solder |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Conector Servo female 4 pines |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
1 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Angled clevis with threaded rod M3 |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | Adjustable brass horn threaded M3 |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | XH female balance (3S) connector (2 pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Pin hinge 39x20 mm (10 uds) |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | VBar NEO |
1 x | Digital scale up to 40 kg |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Xplorer4 anemometro |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | MicroMatch PowerBox |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | XT-60 connector (male) |
1 x | Ferrita con funda |
1 x | 3 LiPo XH>EH adapter |
1 x | Para-RC Mix |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Brass rod Ø 0.8 mm x 1000 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Cable control set |
2 x | Handle for PERMAGRIT lime |
1 x | Extension silicon 50 cm (Futaba) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | Extractor piñones 2.3/3.2 mm |
1 x | EC-Cutter |
1 x | Wing OXY 5,0 m2 |
1 x | Extension silicon 30 cm female (Futaba) |
1 x | Futaba Female 40 cm extension |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Dean-T Plug Mold |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | Conector JR Servo male (10 pcs) |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
1 x | Jeti Black cap |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | Rescue 1,8m2 / BackPack |
1 x | Slave-cable USB Easy Sim |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Small pinned hinge (6 uds) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | 165 mm PVC transparent battery termo-retract 165 mm (10 m) |
1 x | Strip 1,5x1,5x330 mm |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Opale Rucksack |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Horn 5/20 with M2 Bearing |
1 x | 2,0x50 mm allen screwdriver |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Parachute P4 |
1 x | ABS tube 12.0x10.0x1000 mm |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | Extension silicon 50 cm (Graupner) |
1 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Xplorer2 anemometro |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Round Rod 2,5x1000 mm |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | Micro flex hinge (12 uds) |
1 x | Threaded coupler M3 (10 uds) |
1 x | EasyFLY Addon |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 5 m |
1 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | Extension silicon 35 cm male (Futaba) |
1 x | Oracover Brown 2 m |
1 x | Ball Link Plier |
1 x | ORACOVER Ferrari red (2 m) |
1 x | Bag connector 2 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | Dremel PERMAGRIT thin lime |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | Crimping tool |
|
14,155.63EUR |