2 x | Short ball link M2 (6 uds) |
2 x | Short ball link M3 (6 uds) |
1 x | Short ball link M1.6 (6 uds) |
3 x | M2/M1/6 3Diam long black ball link V1 (6 pcs) |
2 x | Long ball link M1.6 (6 uds) |
3 x | Long ball link M2 (6 uds) |
2 x | M2,5 5Diam short black ball link V2 (2 pcs) |
2 x | Socket head ball link M3 (2 uds) |
3 x | Ball link M1.6 (6 uds) |
4 x | T-Motor U7-V2.0 Kv420 |
2 x | PIX Hawk with accesories |
1 x | Angle of incidence meter |
2 x | SIMtransmitter 6 Mode 2 |
8 x | Silent-blocks DLE 170M |
1 x | Battery LiFe TopFuel 3100 mAh 3s MTAG 30C |
1 x | Battery LiFe TopFuel 3100 mAh 2s MTAG 30C |
1 x | Lipo KAVAN 3300 mAh 7.4v 40/80C |
1 x | FELIX JR Red/Yellow 1750 mm |
1 x | Propeller KAVAN 32x12 2-Bl |
1 x | ODYSSEY Yellow, Canopy |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 2.8 kg |
1 x | Glass fabric 390 g/m² aero,10x1m |
1 x | Glass fabric 425 g/m² aero,10x1m |
2 x | Demoulding wedge red (40 x 20 mm) 5 pcs |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 3 (2 uds) |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
2 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Kwik link aluminio IZD. M2.5 L: 23mm (2 uds) pin Ø 1.6 |
2 x | Threaded coupler M2 (10 uds) |
2 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm |
2 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | Kwik link AL M4 con Clip (2 pcs) |
1 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
1 x | Threaded coupler Micro M2 Ø 0,8 (10 pcs) |
2 x | Angled clevis with threaded rod M3 |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
2 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | Aluminium blue ball links M3 V1 (10 pcs) |
2 x | Aluminium coupler M3/2 with ball bearing (1 pcs) |
1 x | Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm |
3 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
2 x | Z type of cable coupler Ø 2 (2 uds) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
1 x | Kwik link AL M3 con Clip (2 pcs) |
2 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
2 x | Brass ball links BS M3 V1 (10 pcs) |
2 x | Threaded coupler M3 (10 uds) |
2 x | Couple M4 for wire (10 pcs) |
2 x | Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm |
2 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
3 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | XH male balance (2S) connector (2 pcs) |
2 x | Digital precision scale up to 2000 g |
1 x | ASPIRE Red ARF 2.000 mm, Canopy |
1 x | FESTO connector 1/8 Quick 6mm 90º |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line Multimode |
1 x | Kit hydraulic brake |
1 x | A/C quality beech plywood BIRCH 600x300x1.0 mm |
1 x | Para-RC Trike "RC-Bullix" |
1 x | Pilot "Anthony" (Slimline) |
1 x | Carbon fiber rod 2.5 mmx1000 mm |
1 x | Connectors banna oro 6,0 mm (M/F) |
1 x | Motor DLE 111 cc |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
1 x | DJI FPV Combo |
1 x | Turbina KINGTECH K142 G4M |
1 x | 1 m servo "Premium" wire (white/red/blue) |
2 x | AddCAP 10AS capacitors |
1 x | VOYAGER Sport Jet 110" - 2790 mmDeco MARINES |
1 x | EDGE 540-A 105" (2660 mm) |
1 x | White silicone 0,25 qmm wire (150 m) |
1 x | White smoke canister 65 g |
2 x | 105 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
2 x | DUPLEX R14 receiver 2,4GHz |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | DUPLEX R12 receiver REX Assist |
1 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Axle for motor A20-S (3 uds) |
1 x | Plasti Dip Liquid Tape 429 ml black |
2 x | |
1 x | Spinner propeller pleg. 30 mm / 3,2 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Metal clevis M2 (10 uds) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | Straightened threaded rod M2-1m |
1 x | Xplorer2 anemometro |
1 x | DUPLEX R7 receiver REX Assist |
1 x | Horn 13,5x16 mm (2 pcs) |
1 x | Pilot "Dick" Legends Series (Slimline) |
1 x | Jet Pipe for ASPIRE 2m JMF |
1 x | Battery LiPo GENS 120 mAh 2S 7.4V 30C (Gens Ace) F3P Pack |
1 x | Cylynder DLE 20-RA |
2 x | Ply-Span 450x600/13g Blue |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs) |
1 x | Paramotor BackPack XXS (without accessories) |
2 x | AXI 2204 Multicopter |
1 x | Balsa panel 2.0x100x1000 mm |
1 x | Aluminun wheel collar 4 mm Ø (4 uds) |
1 x | 8Wx2 Navigation & Strobe, 11mm Green/White |
1 x | Connectors banna oro 8,0 mm (Male) 5 pcs. |
2 x | Fournier RF-4D |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Jeti Black cap |
1 x | Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm) |
1 x | White smoke bombs AX-3 (10 pcs) |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Round Rod 2,0x1000 mm |
2 x | Hot Glue Stick RED |
2 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | F-16 Scale 1/6 G3 Airex Deco: AF 916F |
2 x | DUPLEX 2.4EX MUI 75 |
1 x | OPUS-V / Jet-CC-BF |
1 x | Futaba male 40 cm extension |
2 x | Cabin latch Fox MDM1 4m (pair) |
2 x | Xplorer1 anemometro |
2 x | Extractor piñones 2.3/3.2 mm |
1 x | ARAMID honeycomb 1300x2600x2 mm |
3 x | Extinguisher CO2 - 2 Kg |
2 x | Brass rod Ø 1.5 mm x 1000 mm |
3 x | Squared carbon wing joinner 5x5x220 mm |
2 x | BALSA trip 5.0x5.0x1000 mm |
2 x | Bags de Luxe ASPIRE |
3 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Nitroverdu 500 ml |
1 x | Ring 320 mm length (5 pcs) |
1 x | ABS 500 x 400 x 1 mm (white) |
2 x | Oracover Azul Cielo 2 m |
1 x | Stainless steel cable Ø 0.5 mm (20 m) |
2 x | Hot Glue Stick GREEN |
2 x | Mahogany wood slat 2.0x2.0x1000 mm |
1 x | DUPLEX MUI 50 Sensor |
1 x | CC 01 |
1 x | Connectors banna gold 5,5 mm (M/F) |
2 x | Hot Glue Stick BLACK |
2 x | M3 Maxi ball link (2 uds) |
1 x | Windsock Ozone L - 700 mm |
1 x | Jeti Box mini |
1 x | Optical RPM Sensor |
1 x | Bird (Aero-naut) |
2 x | Antenna holder bracket double |
2 x | Bags de Luxe ODYSSEY |
2 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
1 x | 3 copper lacquer wire Ø0,2 mm (1 m) |
1 x | Heli blades angle measurer |
1 x | Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm) |
1 x | Electric Landing Gear ODYSSEY (Elektron Retracts) |
2 x | Straightened threaded rod M3 - 1m |
1 x | Horn F3A de Titanium 16 mm (2 units) |
1 x | Chili Race F3K 2 wing servo mounted(carbon biax) |
1 x | Brass control horn M2 short for wire (2 pcs) |
1 x | Birch plywood plate 600x300x3.0 mm |
1 x | Motor DLE 170 cc Twin |
1 x | Copper lacquer wire Ø0,2 mm (5 m) |
1 x | Horn DU-BRO 1/2 (2 pcs) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 20 m |
1 x | Round Rod 5,0x1000 mm |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm |
1 x | Universal Filter |
1 x | Starter EM Gear Power 250 |
1 x | Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m |
1 x | Beech dowels 3.0 x 1000 mm |
2 x | JETImodel SINGLE BEC |
1 x | Monokote PLATINO metalizado (1.8x0.65m) |
3 x | 1/12 Pilot "Fighter" |
2 x | Oracover Yellow CADMIO 2 m |
4 x | T-Motor MN705-S Kv125 (pack 2 uds) |
1 x | Silicone red 0,25 mm² wire (25 m) |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 5m |
1 x | Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | 1000 cc gasoline fuel tank complet |
1 x | ESC KOLIBRI 140 HV-I |
1 x | "S" set for planes |
1 x | Cable coupler M2 (10 uds) |
1 x | Motor DLE 120 cc |
1 x | 4 mm M3 red control terminal (4 pcs) |
1 x | ASPIRE Red ARF 2.000 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | T-Connector 4.0 mm x 1000 mm |
1 x | Vest clothes Hispano Aviación |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Kwik link with arm M3xM2xL24 |
1 x | PC-21 2.880 mm RED |
2 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Multiplex True Air Speed + Vario Sensor to M-LINK |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | "Taxi Tank" Fuel Tank |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | 300 Newtons FEMA absorber |
1 x | White smoke canister 100 g |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Round Rod 1,5x1000 mm |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Softshell Hispano Aviación |
2 x | DUPLEX 2.4EX MULi 6s M |
1 x | Balsa panel 2.5x100x1000 mm |
1 x | Flat washer 1.7 mm (20 pcs) |
1 x | ABS tube 2.0x1.0x1000 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | ABS 500 x 400 x 2,0 mm (white) |
1 x | Telemetry interface ALTIS to Futaba |
2 x | Combo 4 pcs AXI 2204 Multicopter |
1 x | DLE 85 Ignition unit |
2 x | Nylon hinge for flaps 33x9 (2 pcs) |
1 x | ASPIRE Red ARF 2.000 mm, Front Fuselage |
1 x | Profile ABS half cane 2.5x1000 mm |
1 x | Fuel line plugs (Silver) |
1 x | Suport PITOT |
1 x | Extension silicon 25 cm (Graupner) |
1 x | Stainless steel cable Ø 1.3 mm (10 m) |
2 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Canopy Astra |
2 x | Papel japones 12 grs/m2 760x510 mm JAPICO |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Gold antispark 4 mm plug |
2 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Small pinned hinge (12 uds) |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Antenna Cloverleaf 5.8 GHz Tx - Rx |
2 x | DLE 111 pipe plug |
1 x | Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm) |
1 x | M2,5 / 5Diam metal short ball link V3 (2 pcs) |
1 x | Protective open Cover for wires Ø 13 mm 1000 mm |
1 x | Fresa corte diamante Ø 2.35mm (flame) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CW thr |
1 x | Walnut wood slat 2.0x2.0x1000 mm |
2 x | DUPLEX R6 receiver REX Assist |
1 x | Socket head long ball link M3 (6 uds) |
2 x | DUPLEX R10 receiver REX Assist |
1 x | DUPLEX 2.4EX MUI 150 Sensor |
1 x | CF tube set (Ø 38 mm y Ø 14 mm) |
1 x | Spikes Band (5 m) |
1 x | 1000 ml sealer (DOPE) |
1 x | Oracover Black 2 m |
1 x | Medidor ángulos y/o incidencias |
1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Miss ULTIMATE 50E , Red Motor Cowl(SebART) |
1 x | ABS Strip 1.0x3.0x1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Propeller APC 12x4.5 MR |
2 x | M2/M1/6 3Diam long black ball link V1 (2 pcs) |
2 x | Initior Receiver FRX2 Wireless |
1 x | Lense for Spotlights, 20mm |
2 x | DUPLEX 2.4EX MT 125 temperature sensor |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
1 x | SAGITA Alsema 4.0 m |
1 x | PC-21 2.880 mm RAAF Sheme |
1 x | Futaba Aero Large Case - Internal Foam |
1 x | BALSA triangular 15x15x1000 mm |
1 x | Connectors banna oro 3 mm (M/F) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 5 m |
1 x | Opale Rucksack |
1 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | 38x4,5 mm wires output (2 pcs) |
1 x | Cable set PREMIUM , fuselage/wing one4one |
2 x | Ply-Span 450x600/13g Yellow |
1 x | Trike XL motor set (motor+esc+prop) |
1 x | Gold antispark 5,5 mm plug |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 10 m |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | DUPLEX 2.4GHz GPS |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 10 m |
1 x | Universal Colour Paste signal white (RAL 9003) 1 Kg |
1 x | Yellow smoke canister 140 g |
1 x | Ball link M2 (10 pcs) |
2 x | Motor Eachine Racer 250 Brushless Motor - BG2204 2300kv - CCW th |
1 x | Carbon fibre sandwich sheet 350x150x3 mm |
1 x | Propeller balancer |
1 x | LUCAS pilot ARTF |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | Circlick securite |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
2 x | Gasket set DLE-30 |
1 x | Horn micro type4 Ø 0,5 (2 pcs) |
1 x | Motor DLE 20 cc |
1 x | Jeti Advance Pro Program Card |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | ASPIRE Red ARF 2.000 mm, Set Elevators |
1 x | ABS I Strip 20x10x1000 mm |
2 x | Electric spoiler 250 mm (2 pcs) |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | ABS angle 6,0x6,0x1000 mm |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 102 mm aluminium spinner |
1 x | Red smoke bombs AX-60 (5 pcs) |
1 x | Silicon black 2,5 qmm cable ( 25 m) |
1 x | 20x15 Falcon electric V2 |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | DUPLEX R18 EX 2,4GHz + Rsat2 |
1 x | Ball Link Plier |
1 x | Screw-lock connector Ø 2 mm (2 uds) |
1 x | VIPER SL NAVY PNP 2270 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Spray adhesive AEROFIX 2 |
1 x | Battery RX JETI LiIon RB 5200 7.2v |
1 x | Ring support P-20 OPUS V-Jet 60mm |
1 x | 3 LiPo XH>EH adapter |
1 x | Short adjustable control horn 3x24 |
1 x | LO 100 ARC 3.3m |
1 x | MRPM-AC revolution sensor |
1 x | 3x8W Triple-Spotlight, 12mm, T-Fuse White |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | MT 125 temperature sensor |
2 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Ferrita con funda |
1 x | Wing OXY 5,0 m2 |
1 x | P 17×5.8 Prop-2PCS/PAIR |
1 x | Cable coupler M3 (10 uds) |
1 x | Ventus 1:4 set of instruments |
1 x | FOX ARF 2000 mm Red (Hacker Model) |
1 x | HAWKER HUNTER 1:5,8 Desert (1.770mm) |
1 x | Green smoke canister 100 g |
1 x | DYNAMOMETER S-1580 |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m |
1 x | CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm) |
1 x | DLE Ignition 170M |
1 x | 30 cm DEANS female connector |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Linden wood slat 2.0x2.0x1000 mm |
1 x | 6 mm ball link M3 (10 pcs) |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | Threaded coupler ALU Left M2,5 Ø 3 (2 uds) |
1 x | Connectors DEANS 4 pins (1 pair) |
1 x | M3 Maxi ball link (2 uds) |
1 x | Servo MKS HBL599 SL |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Receiver RSF08SB comatible FUTABA |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | Banna gold connector 2,5 mm (100 M/F pairs) |
1 x | DLE 55 RA pipe plug |
1 x | Yellow silicone 0,5 qmm wire (50 m) |
1 x | Aluminum Bayonet / strongal D12 mm / 0.5 m |
1 x | Oracover Orange 2 m |
1 x | 115x29 mm (4.50") Type jets aluminium core wheel |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 5m |
1 x | Profile ABS half cane 8.0x1000 mm |
4 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | Banna gold connector 2,5 mm (M/F) |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Swift ARF 2000 mm Red (Hacker Model) |
1 x | Oracover Red 2 m |
1 x | Horn 6/27 with M3 Bearing |
1 x | Receiver DUPLEX R9 EX 2.4 GHz |
1 x | Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm |
1 x | Canister combo DLE 120 cc |
2 x | 1/4 Pilot "Mike" |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
2 x | ASPIRE Navy ARF 2.000 mm |
1 x | DUPLEX 2.4EX Expander E4 |
1 x | M2,5 Diam metal short ball link V3 (2 pcs) |
1 x | ABS tube 10.0x8.0x1000 mm |
1 x | PC-21 2.880 mm BLUE French Army Scheme |
1 x | Allen wheel collar M3x5 |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Ventus 2cx 4.5 m |
1 x | Brass rod Ø 1.0 mm x 1000 mm |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | 28x5 mm wires output (2 pcs) |
1 x | DG-303 ACRO 3750 mm, canopy |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
1 x | Hand Pads for Tray JETI |
1 x | Mahogany wood slat 1.5x1.5x1000 mm |
1 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | Receiver R6008HV-A comatible FUTABA |
1 x | Steering arm 16 mm Ø 3 mm |
1 x | Spare Part Frame Set for EACHINE RACER 250 |
1 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | DG-303 ACRO 3750 mm (Airworld) |
1 x | Spannlack 1000 ml |
1 x | M2 5Diam black ball link V2 (2 pcs) |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
1 x | Servo NARO Max Std |
1 x | Oracover White 2 m |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
1 x | Cap Hispano Aviación |
1 x | Lunak ARF 2000 mm Yellow (Hacker Model) |
1 x | Yellow smoke canister 65 g |
3 x | 20x200 mm battery rings |
1 x | Conector BEC male (10 pcs) |
1 x | Blue metalic ball link M2/2 azul (2 pcs) |
1 x | DJI Mavic Air Fly More Combo |
1 x | Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m |
1 x | EDGE 540-A 74" (1880 mm) |
1 x | Locking cable tie 3.2x142 (uds) |
1 x | 50N turbine start protection tube |
2 x | Motor DLE 170 M- Paramotors |
1 x | quality beech plywood BIRCH 600x300x2.0 mm |
1 x | Brass control horn M2 large for wire (2pcs) |
1 x | White silicone 0,25 qmm wire (100 m) |
1 x | Motor DLE 20 RA cc |
1 x | Ventus 2cx 4.5 m de Luxe |
1 x | Cockpit metalic closing |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Extension silicon 75 cm (Futaba) |
1 x | White 2,4 GHz antenna exit guides (2 pcs) |
1 x | USB Mini Camera endoscope |
2 x | L cockpit anchor "tipe F3A" (2 pcs) |
2 x | Carbon fiber flat 1000x6.0x0.8 mm |
1 x | DLE Ignition 111/120/170 |
1 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Motor DLE 40 cc Twin |
1 x | 110x55 mm C SLH KOVO wheel |
1 x | VAGABOND 1500 mm ARF V2 (Blue) |
1 x | Oracover White 10 m |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | 5 line servos wire black (1 m) |
1 x | 100 mm rods set for direction control |
1 x | Colador RABBIT |
1 x | Fox MDM 1 4000 mm DeLuxe,cabina |
1 x | Dean "T" - Futaba Adapter |
1 x | SE Ring 300 mm (2 pcs) |
1 x | Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm) |
1 x | DLE 55-RA Muffler |
3 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | 100g Flux Paste for Silver Solder |
1 x | Swift S1 De-luxe JEPPESEN 3.140 mm |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | Kobuz 5000 mm (Airwold) |
1 x | ABS tube 6.0x4.0x1000 mm |
2 x | DUPLEX MUI 30 Sensor |
1 x | A/C quality beech plywood 600x300x0.8 mm |
1 x | Digital weight, angle and balance meter BASIC |
2 x | 1/10 Pilot "Jack" |
1 x | FELIX SportJet Red/Yellow 2200 mm |
1 x | Adaptador equilibrador HITEC (XH) |
1 x | 1/7 Pilot "Japanese" |
1 x | Spray Graphit 33 |
1 x | Starter Sullivan-STAR 603 DINATRON |
1 x | Chili Race F3K (aramid nose) |
1 x | PCARD Wireless System |
1 x | 30 cm BEC cable (male) |
1 x | Potenciometro micro |
1 x | Large flex hinge (12 uds) |
1 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | LiPo TopFuel ECO-X 3000 mAh 2s 20C MTAG |
1 x | Lock washer 4.3 mm (20 pcs) |
2 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | Silicone red 0,75 qmm wire ( 25 m) |
1 x | Duralumium F3A horn 30x10x23,5 mm (2 pcs) |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
1 x | Silicone 0,50 qmm servos wire Futaba (100 m) |
1 x | CellPRO 4S Adaptader (GP/KO up to 4S) |
1 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | X-RAY Micro QR (Elevator) |
1 x | Tornillo cabeza boton M4x12 mm (5 pcs) |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
2 x | Canister combo DLE 55 cc |
2 x | 170x54 mm SLH KOVO wheel with bearing and metal hub |
1 x | Sanyo Eneloop AAA 1,2 V battery 800 mAh |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Silicone 0,35 qmm servos wire Futaba (100 m) |
1 x | PIT (Aero-Naut) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
1 x | Pin hinge 26x11 mm (10 uds) |
1 x | Allen wheel collar M4x6 |
1 x | Glider Ka 7 Red (2540mm) |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
1 x | Hobbylite Filler, Balsa colour |
1 x | Conector Servo female 4 pines |
1 x | BOEING 727 kit |
1 x | Rubber profile 8-2 mm 2M |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pine wood slat 2.0x2.0x1000 mm |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
2 x | Propeller balancer |
1 x | Universal Colour Paste white 50 g |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | Hovercraft sailcloth |
1 x | Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna |
1 x | Extra long horn 60x30 |
1 x | ABS tube 16.0x14.0x1000 mm |
1 x | BALSA triangular 10x10x1000 mm |
1 x | HAWKER HUNTER 1:5,8, Electric retract landing gear |
1 x | LUNAK 4,00 m |
1 x | ABS tube 8.0x7.0x1000 mm |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | MPX Sub-D Adaptor |
1 x | 30 cm BEC cable (female) |
1 x | Foreman, scale 1:32 |
1 x | 102x26 Ø6.0 mm aluminium core wheel |
1 x | Straightened rod Ø 3.0 mm x 1000 mm |
1 x | Hacker X-Pro USB interface V2 |
1 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | Quicklock washer 2 mm (10 pcs) |
1 x | Elevator VENTUS 2cx 4.5m |
1 x | Receiver Hitec OPTIMA 9 2.4 GHz AFHSS 9ch |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Yellow smoke canister 100 g |
1 x | Kontronik ProgUnit |
1 x | UBEC 6A KAVAN |
1 x | ProgBOX MASTER Hacker |
2 x | 110x55 mm SLH KOVO wheel |
1 x | Horn with ball 40x30 |
2 x | Joint with bearing M2,5 22x5,5 |
1 x | ASK 21 6.5m + pylona |
1 x | 140 mm rods set for direction control |
1 x | Field folding model stand |
1 x | SHK 4000 mm Scale 1:4.25, V-Tails |
1 x | X-RAY Micro QR |
1 x | Steering arm 16 mm Ø 4 mm (2 uds) |
1 x | Landing gear axle Ø 6 mm (2 uds) |
1 x | Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m |
1 x | Lock nut M2 (20 pcs) |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | Yellow smoke bombs AX-60 (5 pcs) |
2 x | ESC ALPHA 60A HV |
1 x | 18 mm reinforced hinge |
1 x | Allen wheel collar M3x3 |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
1 x | Strip ABS 2.0x8.0x1000 mm |
1 x | Deposito combustible tipo "turbina" 330 ml |
1 x | Canopy Latch |
1 x | Straightened rod Ø 2.0 mm x 1000 mm |
1 x | DISCUS 2A De Luxe 3.750 mm (Topmodel) |
1 x | DG-303 ACRO 3750 mm, winglets |
1 x | Carbon fiber rod 20 mmx1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | Circlik for shaft 2.3 mm (10 pcs) |
1 x | Red copper lacquer wire Ø0,2 mm (5 m) |
2 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/6 Pilot "John" |
1 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | 5 LiPo XH>EH adapter |
1 x | Aluminium wide washer M4 Red (4 pcs) |
1 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 50m |
1 x | Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain) |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | SLICK 360-A 104" (2640 mm) |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | BALSA triangular 6x6x1000 mm |
1 x | Threaded coupler ALU Left M3 Ø 4 (2 uds) |
2 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | Ball Link Plier |
1 x | Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm) |
1 x | Horn 6/20 with M3 Bearing |
1 x | SUS wire 3m (nylon coated) |
1 x | Oracover Verde 2 m |
1 x | Tube bender |
1 x | 500 ml sealer (DOPE) |
1 x | Small aluminium horn red (2pcs) |
2 x | 1/6 Pilot "Buddy" |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Brake controller for 28 and 36 mm Brakes |
1 x | M3 black washers (4 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Carbon Non-crimp ST 200 g/m² 50 cm x 20 m |
1 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | TS832 to Gopro AV/Power Cable |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Receiver RFA05 5Ch compatible FUTABA |
2 x | Bags wings/rudder ODYSSEY |
1 x | ABS tube 8.0x6.0x1000 mm |
1 x | Socket head long ball link M3 (2 uds) |
1 x | Ventus 2cx 4.5 m Sapare Fuselaje |
1 x | White large kwik link (10 pcs) |
1 x | Heli blades angle measurer |
1 x | Axle for motor A30-XL V2 |
1 x | Big Crow DLE-170M |
1 x | Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2 |
1 x | Receiver DUPLEX R5L EX 2.4 GHz |
1 x | Silicone black 0,5 qmm wire ( 25 m) |
3 x | |
1 x | SlowFlyer control horn (3 pcs) |
2 x | Oracover Yellow CUB 2 m |
1 x | Rubber profile 6-2 mm 2M |
1 x | SHK 4000 mm Scale 1:4.25 |
1 x | RH long aluminium horn (2pcs) |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | JR silicone servo wire 0,35 qmm / 5m |
1 x | ABS angle 10,0x10,0x1000 mm |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Locking cable tie 2.5x100 (uds) |
1 x | ABS Strip 1.5x4.0x1000 mm |
1 x | 45 mm rods set for direction control |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | Extension silicon 30 cm female (Futaba) |
2 x | Motor DLE 200cc Premium Muffler |
1 x | Strip 2,0x2,0x330 mm |
1 x | 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode |
1 x | DUPLEX TGs 2,4 GHz (transmitter module) |
1 x | Electric Landing Gear FELIX SporJet 2.200mm |
1 x | PC-21 XXL 3.395 mm |
1 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | 6 mm blue aluminium threaded horn with patella |
1 x | Small Crow DLE-170M |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | Ply-Span 450x600/13g Red |
1 x | Allen wheel collar M4x4 |
2 x | DUPLEX MRMP Hall EX |
1 x | Motor DLE 30 cc V2 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | A/C quality beech plywood 1520x750x3.0 mm |
1 x | Propeller mounting nuts Black / Silver Rocket 400 or Phatom simi |
1 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
1 x | Extension silicon 75 cm (Graupner) |
1 x | Sealing Iron Sleeve PROF |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | White smoke canister 140 g |
1 x | Brass control horn M4 short for wire (4 pcs) |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | ABS angle 1.5x1.5x1000 mm |
1 x | 14x60 mm Mini rings Tie Wraps (4 pcs) |
1 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | XT-30 connector (pair) |
1 x | Wing OXY 0,5 pulgadas2 |
1 x | Bandera Frankr 4x6 |
1 x | U Profile ABS 8,0x4,0x1000 mm |
2 x | DUPLEX R6G indoor receiver 2,4GHz |
1 x | ORACOVER Fluor red (2 m) |
1 x | Xplorer4 anemometro |
1 x | MAX pilot ARTF |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Parachute PV6 for F3J |
1 x | Threaded coupler ALU M2 Ø 3 (2 uds) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | 250 mm / 16 mm Airbrakes |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
1 x | Fuel line plugs (Red) |
1 x | VOYAGER Sport Jet 110" - 2790 mmDeco Yellow/Black |
1 x | DUPLEX R10 receiver 2,4GHz |
1 x | Round Rod 1,0x1000 mm |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | VAGABOND 1500 mm ARF V2 (Red) |
1 x | F9F COUGAR Grey ARF 1.562 mm |
1 x | Tape GFK 38 mm |
1 x | ABS tube 4.0x3.0x1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 100 cm 5m |
1 x | Piloto jet 130 mm |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
1 x | Small flex hinge (12 uds) |
2 x | M2,5 5Diam metal ball link V3 (2 pcs) |
1 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | DLE 85/111/120 Crankshaft keyway |
1 x | SE Ring 330 mm (4 pcs) |
1 x | DUPLEX 2.4 EX MBar |
1 x | Birch plywood plate 600x300x4.0 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
1 x | Sealing Iron Sleeve STD |
2 x | Ply-Span 450x600/13g White |
1 x | Aluminium wide washer M3 gold (4 pcs) |
1 x | Blue metalic ball link M3/3 azul (2 pcs) |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | XT-90 connector (pair) |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | XT-60 connector (male) |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Lock washer 3.2 mm (20 pcs) |
2 x | Kwik link unmount tool |
2 x | Oratex White 2m |
2 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
2 x | Fox MDM 1 4000 mm DeLuxe |
2 x | Fresa corte diamante Ø 2.3mm (bola) |
1 x | Copier 5x20 cm pcs |
1 x | Linden wood slat 3.0x3.0x1000 mm |
1 x | Cabel charger transmitter GRAUPNER |
1 x | 3,0x60 mm allen screwdriver |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | M4xM2,5xL30 nylon clevis and arm (10 uds) |
1 x | Initior Transmitter FTX2 Wireless |
1 x | BALSA trip 4.0x4.0x1000 mm |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
2 x | Joint with bearing M2 22x5,5 |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
2 x | Fox 4000 mm with flaps (Airwold) |
1 x | Tape GFK 50 mm |
2 x | Piloto Jet "Red" 1/6 Scale |
2 x | Hub DLE 30 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
2 x | Ply-Span 450x600/13g Black |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | M2,5 5Diam black ball link V2 (2 pcs) |
2 x | 127x43 Ø6.0 mm aluminium core wheel |
1 x | Joint with bearing M3 22x5,5 |
1 x | DUPLEX RC Droid Box - DC/DS |
1 x | PC-21 2.880 mm (w/o oracover) |
1 x | DUPLEX Satellite receiver Rsat 900 |
1 x | Oracover CARBON Metalic 1 m |
1 x | Handle for PERMAGRIT lime |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | Ferrita 14x8x5.5 mm |
1 x | Civilian pilot "Gramps" size 9cm (Slimline) |
1 x | Cable Cargador FUTABA |
1 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | Balsa panel 1.5x100x1000 mm |
1 x | ABS I Strip 10x5x1000 mm |
1 x | Stainless steel cable Ø 0.5 mm (2 m) |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm |
1 x | Vacuum pump 12 CFM |
1 x | Cable grommet Ø 6.4 mm (4 uds) |
1 x | Profile ABS half cane 3x1000 mm |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | DUPLEX 2,4GHz MRPM EX |
1 x | TP/TopFuel - XH 2/3S Adapter |
1 x | Black smoke bombs AX-60 (5 pcs) |
1 x | Blue silicone 0,5 qmm wire (50 m) |
1 x | Cabel "Y" 30 cm (graupner) |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | ABS Strip 1.5x6.0x1000 mm |
1 x | 120x60 mm SLH KOVO wheel |
1 x | Partall paste 650 g |
1 x | Servo FUTABA S 9670 SV |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
2 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | 55% silver electrodes (2 pcs) |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Cut tube |
1 x | CC 02 |
1 x | Long pinned hinge (6 uds) |
1 x | Field folding model stand SebArt |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
1 x | Silicon red 1,0 qmm cable ( 25 m) |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | ABS tube 5.0x3.0x1000 mm |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Brass control horn M4 long for wire (4 pcs) |
1 x | Motor A30-12 XL Glider |
3 x | 1/12 Pilot "Tom" |
1 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Micro clevis (10 uds) |
1 x | Electric Landing Gear ASPIRE (Elektron Retracts) |
1 x | FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M |
1 x | VIPER SL Thunderbird PNP 2270 mm |
1 x | Fuel line plugs (Blue) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | 2 LiPo XH>EH adapter |
1 x | BALSA trip 2.0x2.0x1000 mm |
1 x | Green smoke canister 140 g |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | 1,5x50 mm allen screwdriver |
1 x | Motor B20-18 L + 4:1 gearbox |
1 x | Carbon Non-Woven, 240 g/m² 100 cm x 2m |
2 x | Pilot "Goose" (Slimline) |
1 x | Gates hinge |
1 x | Extension silicon 100 cm (Futaba) |
1 x | Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm) |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | Electric spoiler 440 mm (2 pcs) |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | White silicone 0,25 mm² wire (25 m) |
1 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Smoke set "S" |
1 x | Electric Landing Gear ODYSSEY |
1 x | HAWK 100 ARF scale 1:4.75 2480 mm - PAINTED AH106 |
1 x | DUPLEX 2.4EX Satellite receiver Rsat 2 |
2 x | Motor DLE 200cc Std |
1 x | DLE 55 Ignition unit |
1 x | Motor A2212/13T |
1 x | Round Rod 3,0x1000 mm |
3 x | Propeller POWER-PROP 7x7 |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | 6 mm M3 variable inclined horn |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | Cable coupler M3 (10 uds) |
2 x | DUPLEX R6 EX receiver 2,4GHz |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll |
1 x | Neck strap JETI DC |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Connector CAN 15 |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Propeller set 400 (2R+2L) |
1 x | Tape GFK 25 mm |
1 x | PVC 0,08 qmm Graupner servos wire (5 m) |
1 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Cockpit plastic closing |
2 x | OPTIC 8 opto Rx-servo insulation |
1 x | Swift S1 De-luxe 3.140 mm |
1 x | Receiver R7008HV comatible FUTABA |
1 x | Chili F3K 2 wing servo mounted |
1 x | Silicone black 1,0 qmm wire ( 1 m) |
1 x | 4 LiPo XH>EH adapter |
1 x | ABS tube 3.0x2.0x330 mm |
1 x | Extra-long adjustable aluminium control horn 2,8x34 |
1 x | ABS Strip 1.0x2.0x1000 mm |
2 x | DLE 111 Carb gasket (V1) |
1 x | Walnut wood slat 1.5x1.5x1000 mm |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Buy Perforated film 145 cm / 50 m |
1 x | 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | Extension silicon 30 cm male (Futaba) |
1 x | DUPLEX R7 REX receiver 2,4GHz A40 |
1 x | ABS "T" angle 10.0x10.0x1000 mm |
1 x | Gates hinge aluminium (1 pcs) |
1 x | Carburator Moki S 180 |
1 x | Sanyo Eneloop AA 1,2 V battery 2000 mAh |
1 x | Canopy Sweet / Siesta |
1 x | Thundertail (RBC Kits) |
1 x | SE Ring 250 mm (2 pcs) |
1 x | Xplorer3 anemometro |
1 x | Antenna MULTIPLEX 2.4 GHz 400mm RX-9/12/16-DR pro |
1 x | SUPER DIMONA TC-80 |
1 x | FELIX SportJet Blue/Green 2200 mm |
1 x | Paint gun for sprays |
1 x | Swift 5050 mm (Airwold) |
1 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | SE Ring 350 mm (2 pcs) |
1 x | Receiver DUPLEX REX 3 A20 2.4 GHz |
1 x | Smoke set "Glider" |
1 x | Steel tube (L 1000 mm Ø12 mm, Ø11,7 mm) |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
1 x | B4-0 rocket charges (6 pcs) |
1 x | COPILOT Multiplex |
1 x | Indoor hinge with servo arm integraded |
1 x | EC5-Set female, simple quality, 2 x female pin, 1 x blue housing |
1 x | HAWKER HUNTER 1:5,8 (1.770mm) |
1 x | Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | Piloto Jet "Green" 1/6 Scale |
1 x | M2,5 Diam metal ball link V3 (2 pcs) |
1 x | 20 mm carbon horn |
1 x | 3l Smoke oil |
1 x | Pine wood slat 1.5x3.0x1000 mm |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Pitot tube JETI MSpeed DUPLEX |
1 x | Brass control horn M4 short for wire (10pcs) |
1 x | Flat washer 3.2 mm (20 pcs) |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Silicone red 0,5 qmm wire ( 1 m) |
1 x | ABS Strip 1.0x5.0x1000 mm |
1 x | Shirt Hispano Aviación |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Carbon Non-Woven, 160 g/m² 127 cm 1 m |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
2 x | Angle measurer |
1 x | ODYSSEY Horns Set GFK |
1 x | Cinta Goldfix 1m |
1 x | Quadcopter Q50 Kit Carbon Fiber |
1 x | Ball link M2,5 (10 pcs) |
1 x | Extension silicon 100 cm (Graupner) |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | LH long aluminium horn L31xH30 (2pcs) |
1 x | DLE-55RA Ignition unit |
1 x | MYLAR film A350 (1000x500 mm) |
1 x | 1/6 Pilot "Tony" |
1 x | 25 mm reinforced hinge |
1 x | VOYAGER Sport Jet 110" - 2790 mmDeco NAVY |
1 x | Round flex hinge (12 uds) |
1 x | Para-RC Mix |
1 x | Tank + hopper Kevlar ASPIRE 6 L Kero |
1 x | Balsa panel 5.0x100x1000 mm |
1 x | Straightened rod Ø 1.0 mm x 1000 mm |
1 x | Red smoke canister 65 g |
1 x | 2,0x50 mm allen screwdriver |
1 x | OSD Telemetry sensor |
1 x | X-RAY Micro QR (Tail Tube) |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | 90 mm rods + T patellas set for direction control |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | Pilot JAN 1/4 Saiplanes |
1 x | Pilot "Duke" Legends Series (Slimline) |
1 x | Strip ABS 2.0x3.0x1000 mm |
1 x | Profile ABS half cane 6.0x1000 mm |
1 x | PT 20x13 EL Propeller |
1 x | Painting GHT Lexan Black 150 ml |
1 x | 1/10 Pilot "Jimmy" |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | IKARUS plane |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | DUPLEX 2.4EX Expander E2 |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m |
1 x | Futaba Female 40 cm extension |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
1 x | Kit repair carburator DLE-170 |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
2 x | DUPLEX USB Adapter |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Oracover Green10 m |
1 x | ASW 15 5000 mm (Airwold) |
1 x | Sukhoi 29S 140" 3D Monster, White cockpit(SebART) |
1 x | Dust collector for mould cleaning |
1 x | VOYAGER Sport Jet 110" - 2790 mmDeco Thunder Bird |
1 x | ABS tube 6.0x5.0x1000 mm |
1 x | Monokote BLANCO jet (1.8x0.65m) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Ball link M3 RPA's-UAV's |
1 x | Para-RC "RC-Evo-Cross" Rescue |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | SCHOCKJET ARF 2.050 mm |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Green smoke canister 65 g |
2 x | M2/M1/6 3Diam short black ball link V1 (2 pcs) |
1 x | DLE 55 Muffler |
1 x | Black spiral protective cover for wires Ø 0,5/50 mm - 25 m |
1 x | LO 100 ARC 3.3m,frame canopy |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Electric Landing Gear GALEB G4 |
1 x | Smoke set "M" |
2 x | Ply-Span 450x600/13g Orange |
1 x | M3-M4 rubber washer (8 pcs) |
1 x | Silicone 0,14 qmm servos wire Graupner (100 m) |
1 x | TS832 to Gopro AV/Power Cable DJI Phantom 2 Compatible |
1 x | Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm) |
1 x | Spray EC Red 400ml |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | DUPLEX USBa USB-Adapter for Jeti Duplex Items |
1 x | Paramotor Trike XL |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Paramotor BackPack XXS 2 |
1 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Civilian pilot "Joe" size 9cm (Slimline) |
1 x | Profile ABS half cane 5.0x1000 mm |
1 x | Me-163 |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Battery RX JETI LiIon RB 6200 7.2v |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | 32x9 mm foam standar KOVO wheel (2 pcs) |
1 x | Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller) |
1 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Futaba Female 40 cm extension |
1 x | Chopped glass fibre strands 3 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | Ø 0,5 mm Pull-Pull Kevlar Line (3 m) |
1 x | Profile ABS triangular 6.0x1000 mm 90º |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | M3 Maxi ball link (2 uds) |
2 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | X-RAY Micro QR (Rudder) |
2 x | METEOR 1.000 mm kit |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
1 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | F-16 Falcon Black Knights 1:6 (1630 mm) |
1 x | Stainless steel cable Ø 0.5 mm (10 m) |
1 x | DUPLEX R7 receiver 2,4GHz |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | 5 mm M2 variable inclined horn |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Oratex Natural White 2m |
1 x | A/C quality beech plywood 1520x750x4.0 mm |
1 x | PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m) |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | 1/6 Pilot "Cindy" |
3 x | 1/6 Pilot "Garry" |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
1 x | Crimping tool |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | Green silicone 0,25 mm² wire (25 m) |
1 x | Ferrita 17x10x6.5 mm |
1 x | Propeller MEJZLIK 21x10 Electric light (36 g) |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Tube Pitot to PIXHAWK |
1 x | 45 mm rods + T patellas set for direction control |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Connectors banna oro 0,8 mm (M/F) |
1 x | Horn for flap control (1 pcs) |
1 x | Sukhoi 29S 140" 3D Monster, White cockpit(SebART) |
1 x | Breatex™ Non-woven absorber 150 g/m² Roll 20m |
1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | 6,4x1000 mm 2:1 green termoretract tube |
1 x | 1,6x1000 mm 2:1 black termoretract tube |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | 4,8x1000 mm 2:1 red termoretract tube |
1 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Transmitter JETI Duplex DS-12 EX Multimod YELLOW |
1 x | 1,2x1000 mm 2:1 red termoretract tube |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | 3,2x1000 mm 2:1 red termoretract tube |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
1 x | PVC termo-retract battery 45 mm transparent orange (1 m) |
1 x | 68 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | PVC yellow transparent battery termo-retract 68 mm (1 m) |
1 x | Baseplate servo |
1 x | Retract undercarriage for gliders 12-25 Kg 2-2.8 (without wheel) |
1 x | Piston ring for DLE-30 |
2 x | Ball bearing 6003 DLE |
1 x | Retract undercarriage for gliders up to 2 Kg |
1 x | Piston ring for DLE-55/111/222 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(without wheel) 140m |
1 x | Retract undercarriage |
1 x | GASKET SET FOR DLE40 |
1 x | CENTRAL PROPELLER BOLT FOR DLE85/111/120 |
1 x | ASG 32 560 mm |
1 x | Silentblock DLE 170M |
1 x | GPS Logger Dymond |
1 x | Needle bearing DLE55-RA |
1 x | Surprise XII Horizontal Estabilizer (Freudenthaler) |
1 x | CHALLENGER Indoor |
1 x | Hub propeller DLE 111 V3/120 |
2 x | Gasket set DLE-55RA |
1 x | Piston DLE 30 - DLE 60 |
1 x | PROPELLER SCREW SET FOR DLE120 (6PCS) |
1 x | Canister combo DLE 170 cc |
1 x | Kit repair carburator DLE-85/111/120/222 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(140 mm wheel with b |
1 x | CILINDER FOR DLE 55RA |
2 x | DLE 85 / DLE111 / DLE120 Prop Washer |
1 x | 1804 2400KV Brushless Motor Qav 250 mini |
1 x | Tester CDI Rcexl |
1 x | Vess propeller 11x7 S |
1 x | Reed valve petal for DLE 111 |
1 x | Gasket set DLE-120 |
1 x | Motor 2212 (1000KV) Quadcopter F450 |
1 x | Escape DLE-60 Izda |
1 x | Spark plug cap DLE 55 / CM6 |
1 x | |
1 x | Gear for MICRO BB |
1 x | Propeller VESS 27A |
2 x | Ball bearing 6002 DLE |
1 x | Ball bearing 6203 DLE |
1 x | Power supply NT 25 Amp. |
1 x | Sparkplug DLE CM6 |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
1 x | Tank GFK Opus/JEt 300 ml |
1 x | DYMOND VTX UBS Programming adapter |
1 x | Reed valve petal for DLE 120 |
1 x | Reed valve petal for DLE 170M |
1 x | Motor brushless 1806 - 2300 Kv Cuadracopter |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | Escape DLE-60 Dcha |
1 x | Gasket set DLE-20 |
1 x | HITEC Power Supply 30A. Max. 540w |
1 x | 1/12 Pilot "Langley" |
1 x | Surface Indicator Gauge Small |
1 x | 110 degree stainless steel bend D=18mm, widened to 20mm |
1 x | KS86 S-6 muffler up to 65cc |
1 x | 100x50 mm SLH KOVO wheel |
1 x | Servo AN-20 MGBBA |
1 x | 280 cc gasoline fuel tank complet |
1 x | Solid Headers for Single Cylinder DA-60 Solid 50mm drop |
1 x | 200 mm extensión servo HITEC/JR |
1 x | Air Intake manifold 90° - Large |
1 x | 1/4 Pilot "Heidi" |
1 x | M2/M1/6 3Diam short black ball link V1 (6 pcs) |
1 x | 1/12 Pilot "Cougar" |
1 x | Ball link M3 (10 pcs, flat ball) |
1 x | ALU double servo arm 3 mm shaft |
1 x | WingFix ULTRA Black Edition |
1 x | Stainless Steel Bend D 22x0,5mm |
1 x | Stainless Steel Bend D 18x0,5 mm |
![](images/pixel_black.gif) |
166,008.17EUR |