18.25EUR


[R390301-00]


Digital precision scale up to 600 g
This digital pocket scale weighs up to 600 g in 0.1 g increments and yields precise results owing to their high-quality measuring technology. The blue illumination makes the display easy legible at all times. The protective cover is an effective transport guard.
Technical data:
Max. 600 g in 0.1 g increments
Easily legible display with blue illumination
Fast measurement
Self-calibration
Simple operation with three buttons
Toggle for grams, ounces, grains, and carats
Dosing/tare
Automatic switch-off (can be deactivated)
Robust 125 x 75 x 20 mm housing of black plastic
Weight: 122 g
Stainless steel weighing surface
Delivery includes 2 x AAA batteries
In normal mode, the scale may switch off if components are added during longer periods of inactivity (power save mode). To prevent this, we have now implemented an additional function where the power-saving mode can be disabled. This means that the scale is guaranteed not to switch off while you are dosing resin or hardener and perhaps take a somewhat too-long break. To activate this function, simply press and hold the tare button for 3 seconds and the display will show "ON". However, this function must be activated again with each restart.


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Connectors banna oro 3,5 mm (M/F)
1 x Connectors banna gold 5,5 mm (M/F)
1 x 30 cm DEANS female connector
1 x Conector BEC female (10 pcs)
1 x 2 mm male connector (2 pcs) with safety connector
1 x Connectors banana oro 6,0 mm Ultralight (M/F)
1 x Conector FUTABA Servo female BLUE silicon (10 pcs)
1 x Connectors banna oro 8,0 mm (M/F)
1 x Connectors banna oro 4 mm (M/F) (ultralight)
2 x Bag connector 2 mm
1 x Conector Servo female 4 pines
1 x Conector FUTABA Servo male (10 pcs)
1 x Connectors banna oro 2 mm (M/F)
2 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Conector JR Servo female (10 pcs)
2 x Conector FUTABA Servo female (10 pcs)
1 x Conector JR/Uni Servo male BLUE silicon (10 pcs)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x 30 cm MULTIPLEX female connector
1 x Conector BEC male (10 pcs)
1 x Connectors DEANS 4 pins (1 pair)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
2 x Connectors banna oro 0,8 mm (M/F)
1 x Connector CAN 15
1 x Conector JR Servo male (10 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Conector JR Servo female (10 pcs)
1 x Servo Connector Brackets (10 pcs)
2 x MPX Support (2 pcs)
1 x XT-90 connector (pair)
1 x Soldering PCBs 8pin, 5 pieces
1 x XT60 Connector with Holder Male 2pcs
2 x MPX screwable clips (5 pcs)
1 x Protector Connector Dean-T (1 pair)
1 x Contacto macho pin conector (10 pcs)
2 x MPX Support
2 x PIN Connector female (100 pcs)
1 x Red 3m5 mm connector holder
2 x Protector Connector MPX (1 pair)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x LASER 73" 1.85m (05) PILOT
2 x FALCON 20X9 CARBON PROPELLER (GAS)
1 x Propeller POWER-PROP 14x9
1 x DUPLEX 2.4EX Central Box 210
1 x Propeller POWER-PROP 14x9 Izda
1 x Propeller POWER-PROP 13x9
1 x Optical RPM Sensor
1 x MR30 connector male
1 x LUCAS pilot ARTF
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Extension silicon 25 cm (Graupner)
1 x Anodized alum. M4x0,7x20 mm Flat Head screw (4 blue pcs)
1 x Mini VISION "spread tow" CFK
1 x Servo Controller Fibra optica
1 x FOX ARF 2000 mm Red (Hacker Model)
2 x Fournier RF-4D
1 x MPX housing with flange (4 pcs)
1 x Fox 4000 mm Airworld,cabina
1 x Swashplate metal LAMA
1 x LO 100 ARC 3.3m
1 x Fox MDM 1 4000 mm DeLuxe
1 x TAKEO 3.6m electric
1 x Swift ARF 2000 mm Red (Hacker Model)
1 x MPX PCB "4 Pins", 5 pieces
1 x DG-303 ACRO 3750 mm, canopy
1 x Soporte carbono MR30 (2 pcs)
1 x DISCUS 2A De Luxe 3.750 mm (Topmodel)
1 x DG-303 ACRO 3750 mm, winglets
1 x Carbon blade 3D 230 mm
1 x Fox 4000 mm (Airwold)
1 x Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models)
1 x Wing connector 8pin with pin strip, plug & socket
1 x Fox MDM 1 6000 mm
1 x Grafas ARF 3.0 m (Top Model)
1 x Aero-Master Wings (Aero-naut)
1 x ALBATROS 3.0 m (orange/white)
1 x FOX 3000 mm, Fuselage (FMS)
2 x XICOY X45 rail
1 x Ion Pro NG electric with flaps ORANGE (JP Model)
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x Gracia Maxi ARF, spare wings (Top Model)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Propeller POWER-PROP 7x7
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x Carbon plate 350x150x1.0 mm
1 x Motor DLE 130 cc
1 x Motor DLE 30 cc V2
1 x Motor Mount for TITAN ZG45 and ZG62, length 54 mm
1 x Header ZG 45/62, "wide"
1 x Header ZG 45/62, "normal"
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Cilinder joint for G230RC/G260RC
1 x Nut for mounting M4 (4 pcs)
1 x Nut for mounting M6 (4 pcs)
1 x Screw M2.5x10 (10 pcs)
1 x Ball Link Plier
1 x 55% silver electrodes (2 pcs)
1 x DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301)
2 x 2,0x50 mm allen screwdriver
1 x 20x200 mm battery rings
1 x 20x1000 mm Ring Strap Back To Back
1 x SE Ring 200 mm (2 pcs)
1 x SE Ring 330 mm (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 360 mm (2 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Marker ties (20 pcs)
2 x SE Ring 300 mm (2 pcs)
1 x Crankcase Gasket set for ZG 74 / ZG 80
1 x Muffler ZG 38/S/SC
1 x Motor DLE 170 cc Twin
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Cylinder gasket per 1 for ZG 74B/ZG 80B
1 x UMS radial-engine, 7 cylinder 90ccm, gas
1 x Ignition for ZG 20/26
1 x Sparkplug Champion RCJ-7Y for ZG
1 x Tufnol Choke Lever Arm d=4,7mm
1 x Gasket cylinder / insulator for ZG 38/S/SC
1 x Motor Mount for TITAN ZG45 and ZG62, length 72 mm
1 x Motor DLE 55 cc
1 x Servo GO-1023MG 7.0 kg.cm 0.09s/60º
1 x EXTRA NG 74" white/red/blue (Skywing RC)
1 x Racor 2/3 mm
1 x Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x Fox MDM 1 4000 mm DeLuxe,wing joiner
1 x LO 100 Scale 1:2 - Modellbau Bruckmann
1 x ASK 21 6.5m + pylona
1 x ASW 20 5000 mm with winglets (Airwold)
1 x SERVO DES 588 BB MG
2 x BLANIK 50 V2 Silver/Blue (SebArt), cabina
1 x LUNAK 4,00 m
1 x 9x4.7 * 22x12 carbon propeller
1 x ASH 31 Mi Scale:1/3 - 7m
1 x LS-8 GFK 6m Glider
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Pan Head Screw M1,6x8 (10 pcs)
1 x Crystal Universal RX 35.070 Ch 67
1 x Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x Avanti S Jet , Carrying bags (SebArt)
1 x Cooler motor type 300
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Avanti S 2.3m Jet WHITE/BLUE (SebArt)
1 x Avanti S Jet , Field folding model stand (SebArt)
1 x Wing conexion 2 servos JR/Graupner 50 cm
1 x Crystal Universal RX 35.130 Ch 73
1 x CESSNA 50E White/Blue
1 x Cooler motor type 400
1 x Propeller 3x3
1 x Propeller 11x4,7 SlowFlyer
1 x Avanti S 2.3m Jet YELLOW/BLACK & retract (SebArt)
1 x Wings carryng bags 30 class (SebART)
1 x Crystal Universal RX 35.170 Ch 77
1 x Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt)
2 x Propeller 8x4,3 SlowFlyer
1 x Crystal Universal RX 35.120 Ch 72
1 x Avanti S 1.8m Jet White/Blue
1 x Avanti S 2.3m Jet YELLOW/BLACK (SebArt)
1 x F-104 Starfighter USAF (SebArt)
1 x Crystal Universal RX 35.150 Ch 75
1 x Avanti S 1.8m Jet FREECE TRICOLORI + Landing gear
1 x Avanti S 1.8m Jet RED Style
1 x 76 mm light wheels (2 pcs)
1 x Connectors DEANS (T)
1 x XH female balance (4S) connector (2 pcs)
1 x Wing connector 8pin with pin strip, plug & socket
1 x MPX Sub-D Adaptor
1 x Banna gold connector 2,5 mm (M/F)
1 x XH female balance (2S) connector (2 pcs)
1 x Dean-T Plug Mold
1 x Dremel PERMAGRIT thin lime
1 x Crimping tool
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x CA Glue fast 20g
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Spikes Band (5 m)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Waterproof adhesive tape, width 19mm, length 25m
1 x Motor DLE 60 cc Twin
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x 
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x Universal Filter
1 x PROXXON - SAW BLADE DIAMOND OZI/E
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x Heli digital angle measurer
1 x Rubber Insert soft, 1 Pcs.
1 x Kwik link unmount tool
2 x Fresa corte diamante Ø 2.35mm (flame)
1 x Llave dinamomterica 74 Z 0 0 21
1 x 22 mm Cut Disc Proxxon/Dremmel
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 480 mm (2 pcs)
1 x Tape GFK 50 mm
1 x Insulator ZG 20
1 x Wings Bags JEEMO
1 x Kontronik connector (10 connectors, 5 pairs)
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Motor UMS Radial-5-125cc gas
1 x Motor DLE 65 cc
1 x PT 22x10 EL Propeller
1 x Spinner NUT M10x1
1 x ESC RAY G2 R-20B BEC
1 x Tool for entel
1 x SIMtransmitter 6 Mode 2
1 x Transmitter Cadet 4Ch (V3) 2,4 GHz Mod.2
1 x PROXXON - SAW BLADE (50MM - 20T) (28017)
1 x PROXXON - SAW BLADE OZI/E, 65MM, 160 TOOTH
1 x Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x 25 mm Sandpaper file
1 x Goma arrancador Ø36 mm x 30 mm
1 x Hot Glue Stick BLACK
1 x 2,5x60 mm allen screwdriver
1 x Sandpaper file 13 mm
1 x Heli blades angle measurer
1 x Vinyl Gloves IDEAL LIGHT, size M , box/ 100 pcs
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Steel brush wheel with 2.35mm
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
60,767.68EUR
Manufacturers
Manufacturer Info
R-G.de
R-G.de Homepage
Other products
Languages
Español English
Currencies