1 x | 12,7x1000 mm 2:1 green termoretract tube |
1 x | Extension silicon 100 cm (Futaba) |
3 x | ABS tube 4.0x3.0x1000 mm |
2 x | Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm) |
2 x | Cable silicona macho batt. receptor 30 cm (Futaba) |
3 x | 37 mm PVC transparent battery termo-retract (1 m) |
2 x | Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs) |
2 x | Copier 2x20 cm pcs |
2 x | Green silicone 0,25 mm² wire (25 m) |
2 x | Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses |
3 x | RCEXL Electronic ignition twin A-02 |
1 x | Pilot "Adolf" Legends Series (Slimline) |
1 x | Sparkplug 1/4-32 |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | Extension silicon 30 cm female (Graupner) |
1 x | SAITO FG-36 carburetor |
1 x | 2,4x1000 mm 2:1 green termoretract tube |
2 x | Concave-Convex sandpaper file 13 mm |
2 x | Glases Nimbus "Black" |
2 x | Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm) |
2 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Optical RPM Sensor |
1 x | Extension silicon 35 cm (Futaba) |
1 x | Profile ABS half cane 7.0x1000 mm |
2 x | Encendido CDI RCAME 1/4*32 Single 120º |
1 x | CM-3 |
1 x | Extra hard 250 ccm complete gasoline fuel tank |
1 x | DYNAMOMETER S-1580 |
2 x | Civilian pilot "Gramps" size 9cm (Slimline) |
4 x | Profile ABS half cane 2.0x1000 mm |
1 x | Stainless steel cable Ø 0.62 mm (10 m) |
1 x | FESTO connector M7 Quick 6 mm |
3 x | Selfstarr EME35 |
3 x | Compact on-board starting system (9512) |
2 x | Straightened rod Ø 0.5 mm x 1000 mm |
2 x | Profile ABS Square 2 x 1000 mm |
1 x | DPS Switch Ampere |
1 x | 0,14 mm PVC servo wire extension, ZH micro conector. |
2 x | ABS tube 14.0x10.0x1000 mm |
1 x | PVC 0,14 qmm servos wire JR/Graupner (5 m) |
1 x | Canopy Latch |
1 x | Dean "T" - Futaba Adapter |
1 x | Locking cable tie 3.2x142 (uds) |
3 x | Profile ABS half cane 8.0x1000 mm |
2 x | Dremel 3000 130W |
3 x | Dremel PERMAGRIT thin lime |
2 x | Pilot "Goose" (Slimline) |
3 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | 1,2x1000 mm 2:1 black termoretract tube |
1 x | Spring Clip Ø25 mm |
2 x | Steering arm 16 mm Ø 3 mm |
2 x | Pilot JAN 1/4 Saiplanes |
2 x | Sparkplug 1/4-32 EVO 10GX |
3 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Fuel Fittings-Blue |
1 x | FESTO connector M7 Quick 6mm 90º |
3 x | Spark motor OS Type F |
1 x | Fabric scissors curved Premium, 16 cm / 6" length |
1 x | PIX Hawk with accesories |
2 x | 1,6x1000 mm 2:1 black termoretract tube |
2 x | Motor A2212/13T |
2 x | ABS tube 8.0x6.0x1000 mm |
2 x | Long pinned hinge (12 uds) |
2 x | 1/12 Pilot "Fighter" |
2 x | ABS angle 5,0x5,0x1000 mm |
1 x | Propeller POWER-PROP 7x7 |
2 x | Propeller electric carbon 10x8 |
1 x | Canopy Lock V1 M3 Blue (2 pcs) |
2 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Kwik link AL M4 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
2 x | 2 LiPo XH>EH adapter |
2 x | 15 mm reinforced hinge |
1 x | 6,4x1000 mm 2:1 blue termoretract tube |
1 x | Jeti Black cap |
1 x | Monokote ROJO misil (1.8x0.65m) |
1 x | Ventus 1:4 set of instruments |
1 x | Cable coupler M2x66 (2 uds) |
1 x | Kwik link aluminio IZD. M3 L: 30mm (6 uds) pin Ø 2 mm |
1 x | Steering arm 12 mm Ø 4 mm (2 uds) |
2 x | Profile ABS triangular 6.0x1000 mm 90º |
2 x | Compact on-board starting system (9525) |
1 x | Fresa corte diamante Ø 2.35mm (lentil) |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
1 x | 6,4x1000 mm 2:1 black termoretract tube |
2 x | Propeller POWER-PROP 11x6 |
1 x | Cabel "Y" 30 cm (graupner) |
2 x | Straightened rod Ø 3.0 mm x 1000 mm |
4 x | Profile ABS triangular 2.0x1000 mm 90º |
3 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Hose clips 6 mm |
3 x | Quick hose connector 3-3 mm |
1 x | Locking cable tie 4.6x203 (uds) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 550 cc gasoline fuel tank complet |
2 x | Cabel PVC 2 x 0.25 mm2 (5 m) red-black |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | FESTO connector M7 Quick 4mm 90º |
2 x | 1,2x1000 mm 2:1 red termoretract tube |
2 x | Cabin latch Fox MDM1 4m (pair) |
3 x | ABS tube 9.0x8.0x1000 mm |
3 x | ABS "T" angle 6.0x6.0x1000 mm |
3 x | Vertical cockpit anchor "tipe F3A" (2 pcs) |
2 x | Ferrita con funda |
1 x | 700 ml complete glow fuel tank |
1 x | ABS tube 12.0x10.0x1000 mm |
2 x | ABS tube 20.0x18.0x1000 mm |
1 x | 4 LiPo XH>EH adapter |
3 x | Brass rod Ø 1.5 mm x 1000 mm |
2 x | ABS tube 3.0x1.0x1000 mm |
3 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
2 x | ABS rectangular profile 10x5.0x1000 mm |
2 x | ABS tube 3.0x2.0x330 mm |
2 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
2 x | 3,2x1000 mm 2:1 black termoretract tube |
1 x | Propeller POWER-PROP 10x7 |
1 x | Straightened threaded rod M2-1m |
1 x | Propeller electric carbon 8.5x7 |
3 x | Dremel PERMAGRIT 18 mm round lime |
1 x | Propeller POWER-PROP 13x8 |
2 x | ABS tube 6.0x5.0x1000 mm |
2 x | Propeller POWER-PROP 15x10 |
3 x | Steering arm 16 mm Ø 3 mm (2 uds) |
2 x | Cut tube |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
1 x | 58 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm) |
4 x | Brass hexagonal rod Ø 4 mm x 1000 mm |
3 x | Fast'n EZ-CA-Hinge (12 uds) |
3 x | Locking cable tie 2.5x100 (uds) |
1 x | PPM Encoder Module |
2 x | Propeller balancer |
3 x | Nylon hinge 15x0,3 (10 pcs) |
1 x | Circlick securite |
2 x | ABS angle 6,0x6,0x1000 mm |
3 x | Profile ABS half cane 3x1000 mm |
4 x | Compact on-board starting system (9724) |
1 x | Suction funnel for carburetor 90D-L (red) |
2 x | Small pinned hinge (6 uds) |
1 x | ABS tube 18.0x16.0x1000 mm |
1 x | 6,4x1000 mm 2:1 red termoretract tube |
2 x | Profile ABS half cane 6.0x1000 mm |
3 x | Copier 5x20 cm pcs |
1 x | Monokote BLUE metalizado (1.8x0.65m) |
4 x | Stainless steel cable Ø 0.5 mm (10 m) |
2 x | Cabling for Fox MDM1 wings |
1 x | CC 03 |
1 x | Kwik link with arm M3xM2xL24 |
1 x | Glases Stratus |
2 x | Steering arm 16 mm Ø 4 mm |
1 x | 4,8x1000 mm 2:1 black termoretract tube |
2 x | ABS tube 8.0x7.0x1000 mm |
2 x | ABS tube 16.0x14.0x1000 mm |
3 x | ABS tube 2.0x1.0x1000 mm |
2 x | 15x7 tree blades propeller |
2 x | Propeller electric carbon 8.5x5 |
2 x | Extension Arm for Carburetor (red) |
1 x | Xoar Electric Beechwood Prop 21x10 |
5 x | Xoar Electric Beechwood Prop 12x6 |
2 x | 30 cm BEC cable (female) |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
2 x | Cable coupler M2 (10 uds) |
1 x | Silicone red 0,75 qmm wire ( 1 m) |
1 x | DPS Switch JR/JR |
1 x | Cable coupler M2,5 (2 pcs) |
1 x | Propeller POWER-PROP 12x8 |
1 x | 3 LiPo XH>EH adapter |
2 x | 4 mm M3 red control terminal (4 pcs) |
2 x | Extension silicon 75 cm (Graupner) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm) |
2 x | Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm |
3 x | Pilot "Dick" Legends Series (Slimline) |
1 x | CC 02 |
2 x | Propeller electric carbon 6x5 |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
3 x | Steering arm 12 mm Ø 4 mm |
2 x | Propeller POWER-PROP 9x5 |
1 x | RCEXL Electronic ignition twin CM-6 |
1 x | Propeller POWER-PROP 10x6 |
3 x | Brass rod Ø 0.5 mm x 1000 mm |
2 x | Glases Nimbus |
1 x | T-Hose connector 4-4-4mm |
4 x | Pin type hinge Al 3,0x50 mm demount (2 pcs) |
2 x | Glases Moritz |
1 x | Piloto Jet "Red" 1/6 Scale |
1 x | Pin type hinge Al 3,0x50 mm (2 pcs) |
1 x | Oracover Azul Cielo 2 m |
1 x | Futaba Female 40 cm extension |
3 x | Profile ABS Square 1 x 1000 mm |
2 x | Zurich Sport Sunglasse Dark Sensity BROWN Glasses |
1 x | Extension silicon 25 cm (Graupner) |
2 x | Small flex hinge (12 uds) |
1 x | Couple M4 for wire (10 pcs) |
2 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | ABS tube 7.0x6.0x1000 mm |
1 x | Split pin 1x8 mm (10 uds) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
3 x | 165 mm PVC transparent battery termo-retract 165 mm (1 m) |
3 x | Stainless steel cable Ø 1.3 mm (10 m) |
1 x | Starter Sullivan-STAR 601 |
2 x | Brass hexagonal rod Ø 3.5 mm x 1000 mm |
1 x | Crimping sleeves for 1.1 mm cable (10 pcs) |
1 x | ABS tube 3.0x2.0x1000 mm |
1 x | Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs) |
2 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Quicklock washer 2.5 mm (10 pcs) |
2 x | Suction funnel for carburetor DA70- MVVW 190cc (red) |
1 x | Flat washer 4.3 mm (20 pcs) |
1 x | Propeller Pleg CAM Carbon 15x6 |
1 x | FESTO connector M7 barb fitting XL Tygon |
1 x | Quicklock washer 4 mm (10 pcs) |
1 x | Motor RACE 720 Navy 12v |
1 x | 4,8x1000 mm 2:1 blue termoretract tube |
3 x | Propeller MEJLIK 22x10 |
1 x | Oracover White 2 m |
3 x | 1/10 Pilot "Jimmy" |
3 x | Straightened rod Ø 0.8 mm x 1000 mm |
1 x | Oracover Orange 2 m |
3 x | Aluminium rod Ø 4.0 mm x 3000 mm |
1 x | Propeller APC 10x10 Electric |
3 x | Small Crow DLE-170M |
1 x | "L" servo arm 65x49 mm (2 pcs) |
2 x | Epoxy Resin HT 2 + Hardener HT 2 (60 min) 1 kg |
3 x | Connector CAN 15 |
1 x | Propeller MEJLIK 28x10 |
1 x | Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm) |
2 x | Stainless steel cable Ø 0.5 mm (2 m) |
2 x | SERVO S9177SV HV S-Bus2 Programable |
1 x | Extension S-Bus 1-2 silicon 30 cm FUTABA |
3 x | Flat washer 2.7 mm (20 uds)pcs) |
1 x | Propeller POWER-PROP 14x10 |
1 x | Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs) |
1 x | Kwik link AL M4 con Clip (2 pcs) |
3 x | 460 mm EPP Floats |
2 x | Metal gear set for HS85MG/5085MG |
2 x | Ply-Span 450x600/13g Blue |
4 x | Cockpit plastic closing |
2 x | Extension silicon 30 cm male (Futaba) |
2 x | Magnetic Interruptor MULTIPLEX |
5 x | Steering arm 12 mm Ø 3 mm (2 uds) |
1 x | Connectors banna oro 3 mm (M/F) |
2 x | Fully Threaded Steel Rod Duralumin 80 mm M3 (2 pcs) |
2 x | Aluminium ignition bad (blue) |
1 x | Monokote BLANCO jet (1.8x0.65m) |
2 x | MEKP Harderner 100 g |
1 x | Carbon tube (L 1000 mm, Ø2 mm, Ø1 mm) |
1 x | Pulley brass 16/2 (2 pcs) |
1 x | Propeller Pleg CAM Carbon 11x10 |
2 x | Angle of incidence meter |
2 x | Aluminium ignition bad (red) |
1 x | STEERING FRONT WHEEL SYSTEM BIDULE 55 |
3 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | FX three-position switched channel, long |
2 x | Aluminium wide washer M4 Gold (4 pcs) |
2 x | Angled clevis with threaded rod M3 |
1 x | Wing bolts M6 Steel screw Blue (2 pcs) |
2 x | Tube bender |
1 x | MAX BEC |
4 x | Motor DLE 430 cc - Paramotors |
1 x | FESTO connector M7 barb fitting 4mm |
1 x | MPX Sub-D Adaptor |
1 x | Spring clamp for tube Ø50 mm |
2 x | Cockpit aluminium closing 5.4g |
1 x | Glass Bubbles 0.19 g/cm³ Panda, tin/ 120 g (approx. 1 l) |
3 x | ALU servo arm 90º 3 mm shaft |
1 x | Glases Innovation Plus |
1 x | 5 LiPo XH>EH adapter |
2 x | Round flex hinge (12 uds) |
3 x | Z-shaped servo mount |
2 x | La Capitania di Venetia 1:50 |
1 x | Screw-lock pushrod conn snap Ø 1.5 mm (2 uds) |
2 x | Tygon tube 7.94 x 4.7 mm 15 m |
3 x | Straightened threaded rod M3 - 1m |
1 x | Covered closure or fairings |
1 x | Oracover Yellow CADMIO 10 m |
1 x | Propeller 8x4,3 SlowFlyer |
1 x | Turnbuckle M2,5x32/48 (2pcs) |
2 x | Fast'n EZ-CA-Hinge, lite (12 uds) |
1 x | Propeller Pleg CAM Carbon 14x8 |
1 x | Interruptor SAFET-SWITCH 12HV Twinbatt |
4 x | |
2 x | Extension silicon 100 cm (Graupner) |
1 x | Quicklock washer 2 mm (10 pcs) |
3 x | Y-Hose connector 4-4-4mm |
1 x | Aluminun wheel collar 2.5 mm Ø (4 uds) |
3 x | Nylon hinge 20x15x0,3 (10 pcs) |
4 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Aluminium cap bolt washer M4 red (8 pcs) |
3 x | Straightened rod Ø 2.5 mm x 1000 mm |
2 x | Opto Gas Engine Kill Switch |
4 x | Straightened rod Ø 4.5 mm x 1000 mm |
1 x | Silicone 0,25 qmm servos wire Graupner (100 m) |
3 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
3 x | Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs) |
2 x | Servo FUTABA S 3071 HV S-Bus |
1 x | Landing gear strap medium (4 uds) |
2 x | Oratex White 2m |
4 x | Extractor piñones 2.3/3.2 mm |
3 x | Xoar Electric Beechwood Prop 15x8 |
1 x | Catalog AERO-NAUT 2016 |
1 x | Silicone 0,50 qmm servos wire Graupner(100 m) |
1 x | Anodized alum. M4x0,7x20 mm Button Head screw (4 dark blue pcs) |
4 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
1 x | 3 mm Leader (L 100 mm) |
3 x | Propeller diller for DLE30/DLE35RA/DLE40/DLE55/DLE61/EME 55/DA-5 |
2 x | Spring lock washer 3.1 mm (20 pcs) |
1 x | Propeller MENZ-S 21x10 3-Blades |
1 x | Clip mini fixing for wing (2 pcs) |
1 x | ESC XREG 80 Amp 2-6 LiPo BEC 5V/3A |
5 x | Straightened rod Ø 1.0 mm x 1000 mm |
2 x | Field folding model stand SebArt |
2 x | Wing bolts M6 Steel screw Red (2 pcs) |
1 x | Rubber bushing with bracket "B" type (2 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | 1,5x50 mm allen screwdriver |
1 x | Set clevis for pull-pull (TY13233 & TY13234) |
2 x | Anodized aluminium M3x0,5x20 mm Sokect Head screw (4 blue pcs) |
2 x | Actuator Electric 25 mm HIGH TORQUE |
2 x | 67 mm cylidric hinge Ø 4,5 mm (5 pcs) |
2 x | Bidule 55 V3 2460 mm |
3 x | Recess mount-rem. glow plug set |
2 x | Futaba BLS255/272/471SV - Gear Set |
1 x | Spring clamp for tube Ø29 mm ext 1pc |
1 x | Ply-Span 450x600/13g White |
2 x | Y Cable |
2 x | Propeller MENZ-S 18x10 3-Blades |
1 x | Electronic fog horn |
2 x | 2,4x1000 mm 2:1 black termoretract tube |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
3 x | Fresa corte diamante Ø 2.35mm (flame) |
1 x | Conector BEC male (10 pcs) |
3 x | Indoor hinge with servo arm integraded |
3 x | Micro flex hinge (12 uds) |
1 x | Hose stopper 4 mm |
2 x | Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs) |
2 x | ORACOVER Ferrari red (2 m) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | SAVOX SH 0254 servo |
1 x | Tygon tube 6.35 - 3.18 mm 1m |
1 x | Pulley brass 2,5/1 (2 pcs) |
2 x | Sealing Iron Sleeve STD |
1 x | Astra wing Joinner (Top Model) |
2 x | Solarfilm Lite blue transp. 5m |
1 x | XT-60 connector (male) |
1 x | SIG Coverall 1.2x1.8 m |
1 x | Aluminium cap bolt washer M4 blue (8 pcs) |
1 x | Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs) |
1 x | Silicone red 0,5 qmm wire ( 25 m) |
1 x | Propeller APC 16x5.5 MR |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
1 x | AXI 2814/20 V2 |
1 x | Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH |
1 x | Horizontal cockpit anchor "tipe F3A" (2 pcs) |
1 x | Control for forward wheel (MINI) |
2 x | Straightened rod Ø 2.0 mm x 1000 mm |
2 x | Propeller MENZ-S 16x10 3-Blades |
1 x | Fully Threaded Steel Rod M3 |
1 x | Y-Hose connector 6-6-6 mm |
1 x | Propeller APC 10x3,8 SF |
1 x | XT-30 connector (pair) |
1 x | Threaded coupler ALU M3 Ø 4 (2 uds) |
1 x | Servo TOPMODEL DS9010 T |
1 x | M2-250 mm Carbon Fiber Adjustable Push Rod Sets (2 pcs) |
1 x | Motor DLE 200cc Std |
2 x | Walbro carburetor for MVVS 26/30/35/40 cc |
1 x | Jeti Box mini |
2 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Propeller POWER-PROP 10x7 Izda |
1 x | Lead with adhesive (2 pcs) |
1 x | Profile ABS Square 4 x 1000 mm |
1 x | Oracover Red 2 m |
1 x | Extension silicon 25 cm (Futaba) |
1 x | Telemetry SPEKTRUM |
1 x | SCHARNHORST accessories |
1 x | ASPIRE Blue ARF 2.000 mm |
1 x | Propeller APC 14x5.5 MR |
1 x | Conector BEC female (10 pcs) |
1 x | Set propellers 10x4.5 SF Carbon Multicopter |
1 x | 41x5,5 mm wires output (2 pcs) |
1 x | LiPo Storage Box Standard 1 Type 1 |
1 x | Propeller Pleg CAM Carbon 10.5x6 |
1 x | ORACOVER Fluor red (2 m) |
1 x | Variable Flow Smoke Pump System |
1 x | Stainless steel flange for VM 60/70/120/140 |
1 x | Pipe Jet REVEL titanio/aluminio |
3 x | |
5 x | Propeller diller for DLE111 and DA85-150 |
1 x | LED wire (rojo - 2pcs) |
1 x | EME 55 cc carburetor WALBRO |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Male Prolonger TP 4/5S |
1 x | Ferrita 27x14x7 mm |
1 x | Flap hinge (6 pcs) |
1 x | M3-M4 rubber washer (8 pcs) |
4 x | Brass rod Ø 1.0 mm x 1000 mm |
1 x | Lock washer 2.2 mm (20 pcs) |
1 x | Female connector for 12 pines AWG |
1 x | Connectors banna oro 2 mm (M/F) (ultralight) |
1 x | JSM U/C Leg Springs for XCALIBUR (Pr) (6-12Kg) |
2 x | Grafas ARF 3.0 m (Top Model) |
1 x | Aluminium battery holder red |
2 x | Motor DLE 200cc Premium Muffler |
1 x | Servo FUTABA BLS172 SV |
1 x | PVC transparent battery termo-retract 85 mm (1 m) |
1 x | JETImodel Addcap 1640 |
1 x | Anodized alum. M4x0,7x20 mm Flat Head screw (4 lilac pcs) |
1 x | Aluminium blue ball links M3 V1 (10 pcs) |
1 x | Socket Screw M2x3 mm (4 pcs) |
4 x | 1/12 Pilot "Langley" |
1 x | Futaba male 40 cm extension |
1 x | Quick hose connector 4-3 mm |
1 x | Tap FESTO 4-4 mm |
1 x | Epoxy 40 min (Hardener). 10Kg |
1 x | Glases Ace |
1 x | Propeller Pleg CAM Carbon 9x7 |
2 x | Servo arm with 6 mm hole to FEMA 9800A |
1 x | DUPLEX 2,4GHz MRPM-AC EX |
1 x | 120x60 mm C SLH KOVO wheel |
1 x | Propeller POWER-PROP 16x8 |
2 x | Servo DITEX EL0510M |
1 x | Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE |
1 x | Tool for entel |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm) |
1 x | Aluminium alloy coupler for carbon tube 6/M4 |
2 x | 1/10 Pilot "Jack" |
1 x | Spinner propeller pleg. 30 mm / 5,0 mm |
1 x | Servo JETI DSHV 3D13T (13 Kg) |
1 x | Propeller electric carbon 8.5x6 |
1 x | EXHAUST STACK Ø 25 mm DLE 55 RA / DLE 61 |
1 x | Fod Guard 94x34 mm |
1 x | Festo 4mm Tubing Holder (10 uds) |
1 x | Female connector for 20 pines AWG |
2 x | ABS angle 4,0x4,0x1000 mm |
1 x | Towing hook |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | Electric Landing Gear F9F COUGAR |
2 x | Field folding model stand |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Propeller electric carbon 10.5x8 |
1 x | Pin type hinge Al 4,5x70 mm to wire (2 pcs) |
1 x | Propeller Pleg CAM Carbon 7x6 M6 |
1 x | Fabric scissors curved (offset handles), 16 cm / 6" length |
1 x | silicon 100 cm Futaba Extension Ø 0,35 mm |
2 x | Epoxy 5 min. 500 g (Hardener) |
1 x | EC5-Set male, simple quality, 2 x female pin, 1 x blue housing |
1 x | PVC yellow battery termo-retract 69 mm (10 m) |
1 x | Thixotropic agent TM 100, tin/ 415 g (approx. 5 l) |
1 x | DLE 55 Ignition unit |
1 x | Cylynder DLE 20-RA |
1 x | Propeller Pleg CAM Carbon 11x4 |
1 x | MPX Support |
1 x | Tailwheel for 40/90 size |
3 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | Snap pin for micro clevis (10 uds) |
1 x | Fully Threaded Steel Rod M2,5 (2 uds) |
2 x | Cockpit metalic closing |
1 x | 152x46 Ø6.0 mm aluminium core wheel |
1 x | 25 mm carbon servo arm |
2 x | Crimping sleeves for cable 0.70 mm (10 pcs) |
1 x | Aluminun wheel collar 5 mm Ø (4 uds) |
1 x | Propeller Pleg CAM Carbon 7x4.5 |
1 x | Kit repair carburator DLE-85/111/120/222 |
1 x | TP/TopFuel - JST-EH 4/5S Adapter |
1 x | Wire easy tensioner (silver) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Long pinned hinge (6 uds) |
1 x | Vacuum pump 12 CFM |
1 x | Porpeller HUNTER 480 |
1 x | Stainless steel 4 m Pull-Pull complet set (max 20 kg) |
2 x | EVP Unit for AXI2208/xx and 2212/xx |
1 x | Seoul Power LED 3 watts PCB Sets: 1x white, 1x red, 1x green |
1 x | Spinner propeller pleg. 30 mm / 3,0 mm |
2 x | 38x4,5 mm wires output (2 pcs) |
1 x | Ø 28 mm fiberglass motor-holder for electric motors |
1 x | Wing bolts M3 Steel screw blue (2 pcs) |
1 x | Servo arms set HS-60/81/85/5082MG/5085mg |
1 x | Sparkplug DLE CM6 |
1 x | 25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller) |
1 x | Actro 32-3 Heli MAX 5mm |
2 x | Canister combo DLE 120 cc |
1 x | F-16 Scale 1:6, Electric retract landing gear |
1 x | COMFORT MOUNT ø 55 mm |
1 x | Blind nut M2 (10 pcs) |
1 x | Propeller MENZ-S 21x10 |
2 x | SIG Coverall 1.2x4.5 m |
1 x | Cables suitable for the motor AC 28/7 |
1 x | Cable grommet 9.5 mm (4 uds) |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 1.35 kg |
2 x | Servo arms set HS-65HB/MG/5065MG |
1 x | Hexagonal Nut M3 (10 pcs) |
1 x | Metal ring front FEMA |
1 x | Fiberglass motor-holder for electric motors |
1 x | Propeller MENZ-S 34x10 |
1 x | Propeller Pleg CAM Carbon 12.5x7.5 |
3 x | Spinner plastic white fixed propeller 30 mm |
1 x | Motor DLE 170 M- Paramotors |
2 x | ABS rectangular profile 12x6.0x1000 mm |
2 x | L-Connector 4.0 mm x 1000 mm |
1 x | Roller cutter 28 mm |
1 x | Hexagonal Nut M2 (10 pcs) |
1 x | Black copper lacquer wire Ø0,2 mm (5 m) |
1 x | Muffler DLE 20-RA |
1 x | FESTO connector M5 Quick 6 mm |
1 x | Racor 3/3 mm |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | Allen wheel collar M4x4 |
2 x | Epoxy 40 min (Resin). 5 Kg |
1 x | Cooler motor type 280 |
3 x | Stainless steel cable Ø 0.88 mm - 60 kp (10 m) |
1 x | DLE 85/111/120 Crankshaft keyway |
1 x | Aluminium wide washer M4 Black (4 pcs) |
1 x | SUS wire 3m (nylon coated) |
1 x | 140 mm rods set for direction control |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Propeller Pleg CAM Carbon 16x13 |
2 x | Brass hexagonal rod Ø 5 mm x 1000 mm |
1 x | Propeller APC 12x6 SF |
1 x | Spring lock washer 2.1 mm (20 pcs) |
1 x | Propeller Pleg CAM Carbon 12x11 |
1 x | Smoke pump RCEXL |
1 x | BAE HAWK Mini 1.29m RED ARROW ARF +elec.L.Gear + 3 Microservos |
1 x | Avanti S 1.8m Jet White/Blue |
1 x | Propeller MENZ-S 27x10 |
1 x | Epoxy Resin L + Hardener L (40 min) 1Kg (715g Resin L + 285g Har |
1 x | Jet Afterburner Simulator NF-Jet3 RYS |
1 x | T-Hose connector 2-2-2 mm |
1 x | ZENOAH/ZG 20cc |
2 x | Propeller Pleg CAM Carbon 10x12 |
1 x | Size "M" motor holder for class 600 |
1 x | Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs) |
1 x | Propeller MENZ-S 24x8 |
2 x | 18 mm reinforced hinge |
1 x | Big Crow DLE-170M |
1 x | 12 mm floating pad (49 pcs) |
1 x | Fully Threaded Steel Rod alumin 80 mm M3 (2 pcs) |
1 x | LightBox SR |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | T-Hose connector 6-6-6 mm |
3 x | Variable Flow Smoke Pump System |
2 x | Epoxy 5 min. 500 g (Resin) |
1 x | Motor mount M |
1 x | 25,0 mm 3-BL M4 hydro-propeller (left hydropropeller) |
1 x | Propeller Pleg CAM Carbon 13x5 |
4 x | 3,0x60 mm allen screwdriver |
1 x | Aluminium wide washer M4 Blue (4 pcs) |
1 x | Protective Cover for wires Ø 6 mm 1000 mm |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | Snap long M2 (10 uds) |
1 x | ZENOAH ZG 26SLH Helicopter Engine |
2 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Extension 5 lipos JST - JST/C |
1 x | 19 mm 2:1 black termoretract tube |
1 x | Glass Bubbles (0,12 g) 350 ml |
1 x | A/C quality beech plywood 600x300x0.6 mm |
1 x | Receiver bed (Blue) |
1 x | Wheel collar 4 mm Ø (4 uds) |
2 x | Epoxy 40 min (Resin). 25Kg |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | Electric Fuel pump |
1 x | Avanti S Jet , Vectorial Exhaust for JetCat P-180 |
2 x | Cable grommet Ø 6.4 mm (4 uds) |
3 x | Oracover Verde 2 m |
1 x | 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | DUPLEX 2.4EX MT 300 EX |
1 x | Electric spoiler 185 mm (2 pcs) |
1 x | Aluminium wide washer M4 Red (4 pcs) |
2 x | Screw M2x8 (10 pcs) |
2 x | Propeller Pleg CAM Carbon 10x4 |
1 x | Oracover Black 2 m |
1 x | Pushrod octagone 4/3 with coupler M3 |
2 x | JIVE 100+LV Esc |
2 x | Aluminium cap bolt washer M3 green (8 pcs) |
1 x | Propeller MEJZLIK 22x10 Electric light (36 g) |
1 x | Carbon servo arms for HITEC HS 65 (4 pcs) |
1 x | Dean-T Plug Mold |
1 x | PVC yellow transparent battery termo-retract 69 mm (10 m) |
1 x | Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled |
2 x | Propeller MENZ-S 32x10 |
1 x | Tip wing protector 30x10 (2 pcs) |
1 x | Propeller MEJLIK 20x8 CFK |
1 x | Propeller Pleg CAM Carbon 12x6.5 |
1 x | VIPER 1.7 Electric break wheels + structure |
1 x | Tygon tube 9.53 x 6.35 mm 15 m |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Servo arm with 5 mm hole to FEMA 9810A |
1 x | Cabel "Y" 30 cm (Futaba) |
1 x | 45 mm black plastic spinner for fixed propeller |
4 x | Brass rod Ø 0.8 mm x 1000 mm |
3 x | 100g Flux Paste for Silver Solder |
2 x | Tester LiPo/LiIon/LiMn/LiFe |
1 x | wire tensioner (red) |
1 x | Lock washer 3.2 mm (20 pcs) |
1 x | 290 mm 290 mm M5x18 mm shaft ship |
1 x | DLE 55-RA Muffler |
1 x | Extension 2/3 lipos JST/C |
1 x | Oracover Azul 2 m |
1 x | 42 mm white plastic spinner for fixed propeller |
1 x | Green silicone 0,25 qmm wire (50 m) |
1 x | Circlik for shaft 1.5 mm (10 pcs) |
1 x | Cable Cargador FUTABA |
1 x | Compact Pitts Muffler OS MAX.35.40 FP |
2 x | 45 mm white plastic spinner for fixed propeller |
1 x | Propeller MENZ-S 19x8 3-Blades |
1 x | Avanti S 1.8m Jet FREECE TRICOLORI |
2 x | 30 mm Alu spinner 3 mm pleg. propeller |
1 x | Compact on-board starting system (9713) |
2 x | LED wire (orange - 2pcs) |
1 x | Propeller Pleg CAM Carbon 14x6 |
3 x | ROBART POINT HINGE 4,7mm (5 pcs) |
1 x | Cable silicona macho batt. receptor 30 cm (Graupner) |
1 x | MPX PCB "Gender-Changer (5 pcs) |
4 x | LED wire (white - 2pcs) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø20 mm, Ø18 mm) |
1 x | Propeller MENZ-S 17x8 |
1 x | Tail wheel for 5-8 kg models |
2 x | Propeller MEJLIK 29x10S |
1 x | Servo Tester |
1 x | Civilian pilot "Curt" size 9cm (Slimline) |
1 x | Jet Afterburner Simulator NF-Jet2YY Set |
1 x | 14 mm portholes (10 pcs) |
1 x | Extension silicon 50 cm (Graupner) |
2 x | NF-3m Heli Kit |
1 x | 135 mm PVC transparent battery termo-retract 68 mm (1 m) |
1 x | Tailwheel for 20/60 size |
1 x | DLE 30 complete electronic ignition |
1 x | Y-Hose connector 3-3-3 mm |
1 x | 34 mm Alu spinner 3.17 mm pleg. propeller |
1 x | Propeller POWER-PROP 11x8 |
1 x | Fuel Fittings-Gold |
1 x | DUPLEX R10 receiver REX Assist |
1 x | Ø 40 mm fiberglass motor-holder for electric motors |
1 x | 90 mm CFK long Spinner fixed by a central screw |
2 x | Gates hinge |
1 x | Profile ABS half cane 4x2.5x1000 mm |
1 x | Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs) |
1 x | Propeller MEJLIK 24x10 TH |
1 x | Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs) |
1 x | MPX-Dean "T" Adapter |
1 x | Aluminium servo arm (2 uds) |
1 x | 39,0 mm propeller (rigth propeller) |
1 x | Spinner propeller pleg. 38 mm/6,0 mm/5º |
1 x | Rubber profile 6-2 mm 2M |
2 x | LED blink wire flashing (white - 2pcs) |
2 x | 90 mm rods + T patellas set for direction control |
1 x | Nylon hinge 20x20x0,3 (10 pcs) |
1 x | Esc KOSMIK 200+ HV |
1 x | PowerBox Smokepump JETs 2x outside |
1 x | Electric Landing Gear ASPIRE |
1 x | Window mounting channel Type H 2.5x0.5 (2 m) |
1 x | Gates hinge 30x16 mm (2 pcs) |
1 x | 200 Newtons FEMA absorber |
1 x | Propeller MENZ-S 24x10 |
2 x | 45 mm rods + T patellas set for direction control |
2 x | Window mounting channel 5m |
1 x | Blind nut M5 (4 pcs) |
1 x | Small kwik link (10 pcs) |
1 x | Gold antispark 5,5 mm plug |
2 x | Propeller MEJLIK 26x12 N-3 Blades |
1 x | "Taxi Tank" Fuel Tank |
1 x | 140 mm rods + T patellas set for direction control |
1 x | Propeller MENZ-S 28x14 3 blades |
2 x | Large flex hinge (12 uds) |
1 x | Futaba T6K-V2 8Ch 2.4 GHz T-FHSS Air |
1 x | 1/4 Pilot "Mike" |
1 x | "S" set for boats |
1 x | Gasket set DLE-120 |
1 x | Propeller Pleg CAM Carbon 10x8 |
1 x | Aluminium cap bolt washer M3 black (8 pcs) |
2 x | Angle measurer |
1 x | Propeller electric carbon 10.5x6 |
1 x | Servo arms set 40/50/55/5055 MG |
1 x | Battery bed V2_S (black) |
1 x | Carburetor DLE 170 |
1 x | Propeller APC 12x4.5 MR Electric Pusher |
1 x | Spinner propeller pleg. 40 mm / 5,0 mm |
1 x | DUPLEX 2,4EX Stick with 3-Position Switch for Transmitter DC/DS |
1 x | Exhaust gasket Valach 85 |
1 x | 2,4x1000 mm 2:1 red termoretract tube |
1 x | NF-3XL set |
1 x | Body for landing gear Ø 3 mm |
1 x | LED blink wire flashing (red - 2pcs) |
1 x | 39,0 mm propeller (left propeller) |
1 x | Propeller diller for DLE170 |
1 x | Sparkplug ROSSI R8 |
1 x | BEC 3A FOXY |
1 x | 57 mm micro-mini servo cover |
1 x | PropCover 16-20" (1 pcs) |
1 x | Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm) |
1 x | |
1 x | Propeller MEJZLIK 20x13 Electric light (41 g) |
1 x | Telemetry interface ALTIS 6 cm |
1 x | Split M1,2x10 (10 pcs) |
1 x | Header ZG 45/62, "normal" |
1 x | Propeller drill jig DA-35/50/60/70 |
1 x | Propeller Pleg CAM Carbon 12.5x6 |
1 x | Propeller Pleg CAM Carbon 7x4 |
1 x | Propeller MENZ-S 17x10 |
1 x | Hardener Aero EPH 161 (500 g) |
4 x | ABS angle 2,0x2,0x1000 mm |
2 x | Pilot "Duke" Legends Series (Slimline) |
2 x | Straightened rod Ø 4.0 mm x 1000 mm |
1 x | Hacker X-Pro USB interface V2 |
1 x | Charger LiPo Charger4 |
1 x | Propeller POWER-PROP 15x8 |
1 x | Metal ball clevis M3 (10 uds) |
1 x | Aluminium cap bolt washer M4 green (8 pcs) |
1 x | Cylinder gasket per 1 for ZG 74B/ZG 80B |
1 x | Aluminium wide washer M3 blue (4 pcs) |
1 x | Spinner propeller pleg. 42 mm / 6,0 mm |
1 x | ABS tube 9.0x7.0x1000 mm |
1 x | Propeller MENZ-S 24x12 |
1 x | 28 mm turnbuckle |
1 x | Kontronik ProgUnit |
1 x | Landing gear clamp for Ø 3 mm (4 uds) |
1 x | Propeller Pleg CAM Carbon 14x12 |
2 x | Landing gear axle Ø 5 mm (2 uds) |
1 x | switch short 3-position DC Tx DUPLEX 2,4EX |
1 x | Propeller MENZ-S 22x12 |
1 x | 25 mm Sandpaper file |
2 x | Logo 400 SE VBar |
1 x | Universal Filter |
1 x | Propeller MENZ-S 22x10 3 blades |
2 x | DLE 111 pipe plug |
2 x | Profile ABS Square 3 x 1000 mm |
1 x | White gelcoat 1 Kg |
2 x | Savox HV Brushless Servo SB-2270SG (Swashplate) |
2 x | Propeller MEJLIK 23x8 CFK |
1 x | Motor RACE 20 Navy 12v |
1 x | Pan Head Screw M2x6 PH |
4 x | L-Connector 1.0 mm x 1000 mm |
1 x | Oracover White 10 m |
1 x | NF-2 RC set |
1 x | Telemetry interface ALTIS 20 cm |
1 x | Allen wheel collar M3x3 |
1 x | Propeller Pleg CAM Carbon 16x10 |
2 x | Propeller POWER-PROP 9x6 |
2 x | T-Hose connector 3-3-3 mm |
1 x | 90x60 mm standart servo cover |
1 x | M3 black washers (4 pcs) |
1 x | Nut for mounting M2,5 (4 pcs) |
1 x | DLE 55 carburetor |
1 x | Avanti S Jet , Exhaust for JetCat P-140 (SebArt) |
1 x | Kwik link with arm M5xM2,5xL30 |
2 x | Civilian pilot "Pamela" size 9cm (Slimline) |
1 x | Fox MDM 1 4000 mm DeLuxe |
1 x | Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs) |
2 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Fixed launching hook |
1 x | Propeller Pleg CAM Carbon 7x6 M8 |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Metal clevis M2 (10 uds) |
1 x | Spinner 115 mm GFK |
1 x | PVC transparent battery termo-retract 70 mm (10 m) |
1 x | LED blink wire flashing (blue - 2pcs) |
2 x | 5.8G Receiver Helical Antenna with protecting case (SMA plug) 12 |
1 x | Propeller Pleg CAM Carbon 10x7 |
1 x | Propeller MENZ-S 28x16 |
1 x | Pushrod greyline 3/2 with coupler M2 |
1 x | Spinner Alumin. fixed propeller 50 mm / 4,0 mm |
1 x | KOBY 40 LV Esc |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
1 x | Avanti XS Jet , Tank for Keroseno (SebArt) |
1 x | LiPo Storage Box Type "P" |
1 x | 36 mm black plastic spinner for fixed propeller |
1 x | Simple take for fuel tank |
1 x | Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs) |
1 x | Propeller Pleg CAM Carbon 11x8 |
1 x | Propeller MENZ-S 26x12 3 blades |
1 x | Support GFK propeller ple. 2Bl |
1 x | P-51D 89", Electric retract Landing gear |
1 x | 12.7 mm 2:1 black termoretract tube |
1 x | Kit repair carburator DLE-170 |
1 x | DLE Ignition unit |
1 x | DUPLEX 2.4EX RC Power Switch 10 |
1 x | Epoxy 40 min (Hardener). 1 Kg |
1 x | Intairco CMB Super Filter - 4mm Barb |
1 x | Mounting base Ms 12 mm |
1 x | Jet Afterburner Simulator NF-Jet3 RY |
4 x | Straightened rod Ø 6.0 mm x 1000 mm |
1 x | Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs) |
1 x | Avanti S 2.3m Jet YELLOW/BLACK (SebArt) |
1 x | Welder 100W/200V |
1 x | Reductora IPS 150 DX2BB-CXCS 8,6:1 |
1 x | ABS tube 10.0x8.0x1000 mm |
2 x | 1/6 Pilot "Buddy" |
1 x | Wheel cover holder Ø 3 mm (2 uds) |
1 x | Pan Head Screw M2x8 PH countersunk head |
2 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | 90x75 mm standart servo cover |
1 x | Header ZG 45/62, "wide" |
1 x | USB Interface Adapter |
1 x | Silicone black 0,5 qmm wire ( 1 m) |
1 x | DUPLEX 2.4EX MSpeed PITOT <300 Km/h |
1 x | Heat Seal Iron |
1 x | Glass Bubbles 0.20 g/cm³ Panda, tin/ 100 g (approx. 1 l) |
3 x | Straightened rod Ø 1.5 mm x 1000 mm |
1 x | Cable set PREMIUM, fuselage/wing |
1 x | Lense for Spotlights, 20mm |
1 x | Sanyo Eneloop AA 1,2 V 2400 mAh battery |
1 x | Propeller Pleg CAM Carbon 9.5x5 Reverse Rotation |
1 x | SCHARNHORST Battleship 1:200 |
3 x | Propeller diller for EME35 and DLE35 |
1 x | Threaded coupler M2 (10 uds) |
1 x | Propeller MENZ-S 34x14 |
2 x | Cable grommet Ø 3.2 mm (4 uds) |
1 x | PROFI Box JETI |
2 x | Servo FUTABA BLS 276SV |
1 x | 28x5 mm wires output (2 pcs) |
1 x | Coupling for 2,3 mm axis |
1 x | Lock washer 4.3 mm (20 pcs) |
1 x | Servos security connector (2 pcs) |
1 x | Servo HITEC HS-5475 HB Digi |
1 x | Jet Pipe 40N-80N (200 mm) |
1 x | Canister combo DLE 55 cc |
1 x | U Profile ABS 2,0x4,0x1000 mm |
1 x | Micro screw-lock pushrod conn snap Ø 1 mm (2 uds) |
1 x | Switch for DC: Long 3 Position |
1 x | Housing Ø 11 mm (20 pcs) |
1 x | Surprise XII Rudder (Freudenthaler) |
1 x | DUPLEX 2.4EX MUI 75 |
2 x | KOBY 70 LV Esc |
1 x | Propeller MENZ-S 16x8 |
1 x | EXTRA 300 78" V3 Orange/Blue |
2 x | ABS tube 5.0x3.0x1000 mm |
1 x | Dumper propeller 6/8 mm |
1 x | 33,0 mm propeller (rigth propeller) |
1 x | Servo HITEC HS-5645 MG Digi |
1 x | PHASOR RACE 2035/4100 1D |
1 x | Molinete / Cabestrante amarre Scale 1:32 |
1 x | SE Ring HACKER 300 mm (2 pcs) |
2 x | Jet Afterburner Simulator NF-Jet2 |
1 x | Futaba Female 40 cm extension |
1 x | Propeller Pleg CAM Carbon 12x10 |
3 x | Fresa corte diamante Ø 1.0mm (bola) |
1 x | 40 mm 1/4" Race propeller (rigth hydropropeller) |
1 x | Propeller POWER-PROP 13x10 |
1 x | Propeller MENZ-S 26x10 |
1 x | DUPLEX 2.4 EX MVario2 |
1 x | Prop rubber XS set 4 pieces |
3 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Kerosene valve EVO Jet |
1 x | Cylidric hinge 33 mm Ø 2 mm (5 pcs) |
1 x | Propeller Pleg CAM Carbon 18x13 |
1 x | Yellow smoke canister 140 g |
1 x | Nylon gear block Ø 4 mm (2 uds) |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Big-Malibu XL Roof box with surfboard rack GREY |
3 x | Profile ABS half cane 2.5x1000 mm |
1 x | T- Fittings blue color (2pcs) |
1 x | Electric starter BEE (old) |
1 x | DUPLEX 2.4EX MU 3 Sensor |
1 x | Yellow smoke canister 100 g |
1 x | Baal link 4/14/4 (5 pcs) |
1 x | Tube holder |
1 x | Fast attachment for servos (25 pcs) |
1 x | 100 mm rods set for direction control |
1 x | Adapter 5,0 mm M8 |
2 x | Servos wing assembly set HS 80/81/82/85 |
1 x | Propeller Pleg CAM Carbon 9.5x7 |
1 x | Glases Aspen |
1 x | T-Hose connector 3-3-3 mm |
1 x | ODYSSEY Blue ARF 2190 mm |
1 x | PVC 0,14 qmm servos wire Graupner (100 m) |
1 x | Clip fixing for wing (2 pcs) |
1 x | ALBATROS 3.0 m (orange/white) |
1 x | Sanyo RX Battery Eneloop 4,8 V JR |
1 x | Epoxy Casting Resin + Hardener "water-clear" (300 min) |
1 x | Spinner 125 mm GFK |
1 x | L ELBOW 90º ø 25 mm |
1 x | Allen wheel collar M4x6 |
1 x | Crimping sleeves for cable 0.85 mm (10 pcs) |
1 x | Propeller MENZ-S 26x12 |
1 x | Bearings for motor HACKER C50 |
1 x | Carburetor menbrane for ZG 45SL/ ZG62/S/SL motor |
1 x | Screw M3x12 (10 pcs) |
1 x | Servo HS-5070 MH Hi Volt |
2 x | Propeller MEJLIK 21x8 CFK |
1 x | 22 mm Cut Disc Proxxon/Dremmel |
1 x | AddCAP 10AS capacitors |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
1 x | Spinner propeller pleg. 36 mm/6,0 mm/0º |
1 x | AX-60 starters (5 pcs) |
1 x | Universal batery Tester |
1 x | Propeller electric carbon 9.5x6 |
1 x | Silicone black 4,0 qmm wire ( 1 m) |
1 x | Epoxy Resin L 285 + Hardener 285 (Aero), kit/ 1 kg |
1 x | 63 mm INO spinner (carbon imitation) |
1 x | Snap short M2 (10 uds) |
1 x | Epoxy QUIK-CURE™ 5 min (130g) |
2 x | Propeller Pleg CAM Carbon 6x6 |
1 x | Spinner propeller pleg. 48 mm / 6,0 mm |
1 x | Propeller POWER-PROP 16x10 |
1 x | Rubber profile 10-2 mm 2M |
1 x | Propeller Pleg CAM Carbon 12.5x9 |
3 x | Propeller diller for DA50, DLE55 red |
1 x | Avanti XS Jet , Exhaust for JetCat P-60/P-140 (SebArt) |
1 x | Tapping Screw M2.9x9.5 (10 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Gracia Maxi ARF (Top Model) |
1 x | Bidule 170 ARF 3.48 m |
1 x | Extension silicon 75 cm (Futaba) |
1 x | Propeller MENZ-S 30x12 |
1 x | LA500 rotor head shaft |
1 x | AL Axle Shaft 4.0x16 mm (2 uds) |
1 x | Glow/Gas/Smoke/Kerosene filter |
2 x | Pin hinge 26x11 mm (10 uds) |
1 x | Remote electric ignition system |
1 x | DLE Ignition 170M |
1 x | DUPLEX R12 EPC receiver 2,4GHz |
1 x | Propeller MENZ-S 22x12 3 blades |
1 x | Power Pack SE Series JETCENTRAL |
1 x | Legs + electric brakes for Viper Jet 90 |
2 x | Snap for floding prop for 2 mm axi |
1 x | Cap closure 33/23.5mm (2 uds) |
1 x | Cockpit aluminium closing 4.7g |
1 x | Starter 12v (Max 90 and 15ccm) |
1 x | EnLink 2RS Plus - DUO |
1 x | Hose connector stopper 4 mm |
1 x | SE Ring 450 mm (2 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 |
1 x | Propeller Pleg CAM Carbon 13x11 |
1 x | Motor mount for 1 m models |
1 x | KWIKFILL FUELING VALVE GLOW |
1 x | Oracover Yellow CADMIO 2 m |
1 x | Pan Head Screw M1,6x6 (10 pcs) |
1 x | FESTO connector M7 barb fitting 6mm |
1 x | Protective Cover for wires Ø 10 mm 1000 mm |
2 x | T-Connector 4.0 mm x 1000 mm |
1 x | MIG AC 400 /14 |
1 x | Avanti S Jet , Field folding model stand (SebArt) |
1 x | Compact on-board starting system (9715) |
1 x | Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm |
1 x | ZERO Figther A6M52 93", Electric retract Landing gear |
1 x | Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs) |
1 x | 51 mm white plastic spinner for fixed propeller / 4,0 mm axi |
1 x | 50cm Flexible Stainless Steel Exhaust Tubing D=25mm |
1 x | Cyano INSTA - CURE™ Pocket (18g) |
1 x | Dual Sequencer Gear and Canopy |
1 x | 48 mm cylidric hinge Ø 2,5 mm (5 pcs) |
1 x | Ply-Span 450x600/13g Black |
1 x | Cockpit latch closing I=10 mm |
1 x | QS Bulkhead Valve 6/6 mm |
1 x | Crankcase Gasket set for ZG 74 / ZG 80 |
1 x | PVC transparent battery termo-retract 195 mm (1 m) |
3 x | LED wire (green - 2pcs) |
1 x | DUPLEX 2,4EX Stick with 2-Position Switch for Transmitter DC/DS |
1 x | Propeller Pleg CAM Carbon 18x9 |
1 x | Bearing MR63 ZZ for AXI 2203/40 VVP |
1 x | KatanaS 50E, Landing gear WHITE (SebART) |
1 x | Dummy motor GPW Wasp Scale 1/4 |
1 x | Extension silicon 10 cm (Futaba) |
1 x | Propeller Pleg CAM Carbon 17x10 |
1 x | 12x6 tree blades propeller |
1 x | 89 mm double servo arm with bearing (2 pcs) |
1 x | Threaded coupler M2,5 (10 pcs) |
2 x | Straightened rod Ø 5.5 mm x 1000 mm |
1 x | PVC termo-retract battery 45 mm black transparent (1 m) |
1 x | PARAGON Trainer 46-55 1580 mm |
1 x | Propeller electric carbon 9.5x5 |
1 x | PVC blue transparent battery termo-retract 95 mm (1 m) |
1 x | Female connector for 10 pines AWG |
1 x | Futaba FX36 2.4GHz FASST Test + R7008SB |
2 x | Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
1 x | Reduction gear 2.8:1 for ZG 38 inline version |
1 x | XH LiPo extension lead |
1 x | LED blink wire flashing (green - 2pcs) |
1 x | Fully Threaded Steel Rod alumin 60 mm M2,5 (2 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
1 x | Avanti S 1.8m Jet RED Style |
1 x | Thread locker IC-Loc™ red "high" 10 ml |
1 x | 36,0 mm propeller (rigth propeller) |
1 x | Neoprene tube 7,5x3,5 mm (1 m) |
1 x | Propeller Pleg CAM Carbon 10x5 |
1 x | Pin type hinge Al 4,5x70 mm demount (2 pcs) |
1 x | ALU servo arm 3 mm shaft |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | ODYSSEY ARF 2190 mm + Electric Landig Gear,COMBO |
1 x | Pin type hinge Al 6x98 mm (2 pcs) |
1 x | Gates hinge aluminium (1 pcs) |
1 x | JIVE 80+LV Esc |
1 x | Life guard Ø 35,0 mm (2 pcs) |
1 x | LA500 freewheel bearing |
1 x | Aceite AEROSHELL 500 SE Turbina 0,9 kg |
1 x | 2 mm female connector (2 pcs) with safety connector |
1 x | Propeller MENZ-S 28x8 |
1 x | Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs) |
1 x | COPILOT Multiplex |
1 x | Hexagonal Nut M2.5 (10 pcs) |
1 x | ZENOAH ZG 80B |
1 x | Propeller MENZ-S 20x10 3 blades |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Propeller MEJLIK 16x11 3 Blades |
1 x | Telemetry interface ALTIS to Futaba |
1 x | M3 INDUSTRIAL ball link (2 uds) |
1 x | SERVO DES 707 BB MG, Pignons |
1 x | Spinner black 30 mm |
1 x | MPX screwable clips (4 pcs) |
2 x | Jet Afterburner Simulator NF-Jet1RY Set |
1 x | Servo HITEC HS-645 MG |
1 x | Motor Saito FG-36, 36 cc |
1 x | Yellow smoke canister 65 g |
1 x | Propeller MENZ-S 16x6 3-Blades |
1 x | 290 mm M4 7/8x212 mm shaft ship |
1 x | Axle for AXI 2208/xx motors |
1 x | Propeller Pleg CAM Carbon 11x6 |
1 x | Pan Head Screw M1,6x8 (10 pcs) |
1 x | Pulley brass 14/2 (2 pcs) |
1 x | Propeller Pleg CAM Carbon 11x5 |
1 x | Sparkplug Saito 400 |
1 x | Pan Head Screw M2x8 PH |
1 x | Housing Ø 6 mm (20 pcs) |
1 x | USB Interface REVOLECTRIX for CellPRO 10s |
1 x | Reed valve petal for DLE 120 |
1 x | Teacher-student connector T12FG/FX-30 |
1 x | Kit repair carburator DLE-20/20RA/30/35RA/40/55/55RA/60/61 |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | servo adapter lead, JST-SH socket - JR male Pin, for GR-12SH+HoT |
1 x | DLE-55RA Ignition unit |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
2 x | 1/12 Pilot "Cougar" |
1 x | VIPER 1.7 Tailpipe + Fuel Tank 1500ml |
1 x | 9x4.7 * 22x12 carbon propeller |
1 x | ZENOAH ZG 38 SC with Choke Carburettor |
1 x | SunCover 50 Class (SebART) |
1 x | DSM 10 Dual Switch Mixer |
1 x | Red 3m5 mm connector holder |
1 x | Protective Cover for wires Ø 15 mm 1000 mm |
1 x | Sensor DUPLEX 2.4EX MUI 200 MULi 6S for measuring voltage on LiX |
1 x | Landing gear retract neumatic (Jet Legend) |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Servo HITEC HS-5245 MG Digi |
1 x | Crimping tool |
1 x | F3A carbon 75 mm spinner for Hacker C-50 |
1 x | Thread locker IC-Loc™ green "wicking" 10 ml |
1 x | Gracia Maxi ARF, bags (Top Model) |
1 x | BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser |
1 x | Propeller MENZ-S 16x12 |
1 x | Pushrod octagone 3/2 |
1 x | PRO-HV Dual Action Valve |
1 x | ALU double servo arm 3 mm shaft |
1 x | PVC red battery termo-retract 68 mm (10 m) |
1 x | Green smoke canister 140 g |
1 x | Balsa panel 4.0x100x1000 mm |
1 x | Servo holder for retract |
1 x | Propeller RABOESCH.Ms 60L (5 Blades) (Left hydropropeller) |
1 x | Silicone 0,35 qmm servos cable Futaba (5 m) |
1 x | Reductora IPS dual-motor 10,7:1 with spinner |
1 x | BD-5 Pro ARF |
1 x | DUPLEX 2,4EX Switch SAFETY 2-Position Safety DC-16/14 |
1 x | MPX screwable clips (5 pcs) |
1 x | GlassBubbles 2.5 g/cm³ Panda, tin (approx. 1 l) |
1 x | Vacuum Connection VA 1 (for hose Ø 6 mm) |
1 x | Quick hose connector 3-3 mm |
1 x | Propeller Pleg CAM Carbon 16x6 |
1 x | APM2.6 Power module with 5.3V DC BEC |
1 x | Transmitter JETI Duplex DS-24 EX Carbon Line Dark ORANGE Multimo |
1 x | Metal clevis M2,5 (10 uds) |
2 x | Quick hose connector 6-6 mm |
1 x | Spinner 40 mm Black (Kavan) |
2 x | 1/4 Pilot "Heidi" |
2 x | 1/7 Pilot "Japanese" |
1 x | 1/6 Pilot "Cindy" |
1 x | Civilian pilot "G-Man" size 9cm (Slimline) |
1 x | Militarian pilot "Kamikaze" size 9cm (Slimline) |
1 x | 1/6 Pilot "John" |
2 x | Piloto Jet "Green" 1/6 Scale |
1 x | Militarian pilot "Fly Boy" size 9cm (Slimline) |
1 x | 1/6 Pilot "Garry" |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | Digital scale up to 40 kg |
1 x | Digital precision scale up to 2000 g |
1 x | Digital weight, angle and balance meter BASIC |
1 x | |
1 x | Straightened rod Ø 8.0 mm x 1000 mm |
1 x | Brass hexagonal rod Ø 3 mm x 1000 mm |
2 x | Fresa corte diamante Ø 1.4mm (bola) |
1 x | Ball Link Plier |
1 x | Aramid fibre shears Proton®, 21 cm / 8" length |
1 x | Straightened rod Ø 7.0 mm x 1000 mm |
1 x | Dust collector for mould cleaning |
1 x | Straightened rod Ø 1.5 mm x 1500 mm |
1 x | Crimping tool |
1 x | 55% silver electrodes (2 pcs) |
1 x | EC-Cutter |
2 x | DUBRO - KWIK TWIST TOOL - TO TWIST STEEL WIRE (1 PC) (301) |
2 x | 2,5x60 mm allen screwdriver |
1 x | Boxed KIT OF 7 Rotary Burrs FINE |
1 x | Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm) |
1 x | Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm) |
1 x | ABS tube 6.0x4.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
2 x | Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm) |
2 x | ABS angle 10,0x10,0x1000 mm |
1 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | L-Connector 1.5 mm x 1000 mm |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
2 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Plasti Dip Liquid Tape 429 ml black |
1 x | Horn 20x28,5 mm (2 pcs) |
1 x | Control horn long w/ball |
1 x | Pilot "Anthony" (Slimline) |
1 x | Steel brush wheel with 2.35mm |
1 x | Kwik link unmount tool |
1 x | Ball Link Plier |
1 x | Vacuum pump P1-N |
1 x | Z Bender - S Type Tool |
1 x | Propadapter for motor A50-V3 |
2 x | Alu-Cross for Backmount of A60-V2-Backmountmotors |
1 x | Carbon plate 350x150x1.0 mm |
1 x | 18m Fitting barb |
1 x | Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm) |
1 x | Rubber profile 8-2 mm 2M |
1 x | Bungee HLG Premium |
1 x | Wings Bags JEEMO |
1 x | EXTRA 300L 1.2 m Blue |
2 x | GPS Expander Module |
1 x | Tool for entel |
1 x | Giant Scale Muffler D.A. 70 |
1 x | Jet Afterburner Simulator NF-Jet3 YSW |
1 x | NF-3X-350 set |
1 x | Resistor 3W 5% 2R2 |
1 x | Reflector 18 mm (2 pcs) |
1 x | Light System |
1 x | Sealing Iron Sleeve PROF |
1 x | Sandpaper file 13 mm |
1 x | Blocking screws M6 gas engine |
1 x | Propadapter for motor A60-V2 |
1 x | 2,0x50 mm allen screwdriver |
1 x | Handle for PERMAGRIT lime |
1 x | Heli blades angle measurer |
1 x | Goma arrancador Ø36 mm x 30 mm |
1 x | DLA 116 crankshaft |
1 x | Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm) |
1 x | Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m) |
1 x | Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm) |
1 x | Adaptadores carga 6s JST-XH |
1 x | Filler Gauges |
1 x | Straightened rod Ø 14.0 mm x 1000 mm |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | TX 250 mW especial GOPRO |
1 x | JEEMO Kit ARF Basic (2 color) - XTRALIGHT |
1 x | Heat sink for Optotronix LEDs |
1 x | Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm) |
1 x | Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm) |
1 x | Carbon tube 3K-Matt (L 1000 mm, Ø25 mm, Ø23 mm) |
1 x | Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm) |
1 x | Micro Tarjeta SD Rapid Rush 16 GB |
1 x | Fuselage Bags JEEMO |
1 x | Jeemo Dolly |
1 x | Motor HP 220/30/A3 P4 5:1 |
1 x | Motor ORBIT 20-12 with coolingfan |
1 x | Straightened rod Ø 5.0 mm x 1000 mm |
1 x | PT 20x13 EL Propeller |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | Heli digital angle measurer |
1 x | LED lighting system High Power |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | HPP-21 PLUS PC Programmer for Hitec Digital Servos |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | MPX plug mold V1 |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
|
116,344.76EUR |