39.00EUR

Smart Soldering Iron 110W/230V AC
[KAV668338]


Powerful pen-like 110W soldering iron with micro-processor regulated temperature (100–500°C), 230V powered. LED-backlit display and 3 buttons for simple controls. Adjustable working temperature, temperature compensation (offset) and smart standby mode for energy saving. Replacable tip, grounded to protect from electrostatic discharge.
Powerful 110W pencil soldering iron with microprocessor temperature control (100–500°C) and 230V mains power supply. Compact soldering iron for fine and precise work at home in the workshop, at the airfield, race track, or by the water - wherever mains power is available.
Precise microprocessor control of the soldering tip temperature, adjustable from 100–500°C in 1°C increments.
Adjustable compensation (offset) of the soldering tip temperature (±50°C).
Intelligent standby mode to save energy - after an adjustable period of inactivity (1–30 min), the soldering tip temperature is automatically reduced to 100 °C to save energy and extend the life of the heating element. Thanks to the built-in motion sensor, simply pick up the soldering iron and the tip will quickly heat up to the operating temperature again.
LED display and 3 buttons for easy adjustment.
Interchangeable tips for fine spot work and soldering thicker cables (sold separately).
Silicone sleeve for a secure and safe hold on the soldering iron.
Grounded tip for protection against electrostatic discharge (impedance to ground <2 Ohm, voltage to ground <2 mV).
Fault indication on the display.
Mains power supply 230 V/50 Hz.
Max. power 110W.
Soldering iron kit includes: soldering iron Smart 110W/230V with tip, stand, and operating instructions.

Power supply [V] 230
Max. power [W] 110
Diameter [mm] 23
Length [mm] 260


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x quality beech plywood BIRCH 600x300x2.0 mm
1 x Balsa panel 1.0x100x1000 mm
1 x A/C quality beech plywood 600x300x1.5 mm
1 x BALSA trip 4.0x4.0x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
2 x Pine wood slat 10x10x1000 mm
2 x A/C quality beech plywood 600x300x5.0 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x Birch plywood plate 600x300x4.0 mm
1 x Beech dowels 4.0 x 1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x BALSA trip 5.0x5.0x1000 mm
2 x Linden wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x BALSA triangular 10x10x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
1 x A/C quality beech plywood 600x300x0.6 mm
1 x OBECHI sheet 2.0x3.0x1000 mm
2 x Walnut wood slat 2.0x2.0x1000 mm
1 x RF9 Flight Simulator with Spektrum Controller
1 x Interface Jack Adapter IKARUS
1 x SIMtransmitter 6 Mode 2
1 x GameCommander USB Universal
1 x Long pinned hinge (12 uds)
1 x Long pinned hinge (6 uds)
1 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x Miniature brass strap hinge, 1 m
2 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
1 x Pin type hinge Al 6x98 mm (2 pcs)
1 x ABS tube 18.0x16.0x1000 mm
2 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x Starter 12v (Max 90 and 15ccm)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Vacuum Connection VA 1 (for hose Ø 6 mm)
1 x Copier 2x20 cm pcs
1 x ABS tube 5.0x4.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x 
1 x ABS tube 9.0x8.0x1000 mm
1 x Starter EM Gear Power 80
2 x Screwdriver for Torx® TX6
2 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x Ball Link Plier
1 x Hexagonal ball head 2.0 x 50 mm
2 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Screwdriver for Hexagon 1,27mm
1 x 1,5x50 mm allen screwdriver
1 x Z Bender - S Type Tool
2 x ABS tube 3.0x2.0x330 mm
2 x Screwdriver for Hexagon 1,5mm
2 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
1 x Hot Glue Stick GREEN
1 x Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 7.0x6.0x1000 mm
1 x Dust collector for mould cleaning
2 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Ball Link Plier
2 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x 2,5x60 mm allen screwdriver
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x 2,0x50 mm allen screwdriver
2 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x Digital precision scale up to 2000 g
1 x Z Bender - S Type Tool
1 x Vacuum pump P1-N
1 x Crimping tool
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x Streamline Stainless Steel Tubing 11.5x6.5x1000 m
1 x L-Connector 4.0 mm x 1000 mm
1 x Cross Connector 4.0 mm x 1000 mm
1 x ABS angle 10,0x10,0x1000 mm
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Profile ABS Square 3 x 1000 mm
2 x ABS "T" angle 8.0x8.0x1000 mm
1 x L-Connector 1.0 mm x 1000 mm
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Profile ABS half cane 3x1000 mm
1 x L-Connector 1.5 mm x 1000 mm
1 x U Profile ABS 8,0x4,0x1000 mm
2 x U Profile ABS 1,0x2,0x1000 mm
1 x ABS angle 3,0x3,0x1000 mm
1 x U Profile ABS 2,0x4,0x1000 mm
2 x ABS angle 4,0x4,0x1000 mm
1 x Profile ABS half cane 2.5x1000 mm
1 x 200m servo "Premium" wire (white/red/blue)
1 x Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x 10m servo "Premium" wire (white/red/blue)
1 x Balsa panel 3.0x100x1000 mm
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x 500 ml sealer (DOPE)
1 x Paramotor BackPack XXS 2
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Piloto JET 1:3,5
1 x ABS I Strip 10x5x1000 mm
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
2 x ABS tube 9.0x7.0x1000 mm
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x ABS tube 4.0x3.0x1000 mm
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Profile ABS Square 4 x 1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø19 mm, Ø15 mm)
2 x Extractor piñones 2.3/3.2 mm
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Y Cable
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø13.0 mm, Ø12.0 mm)
1 x Optical RPM Sensor
1 x 120x60 mm C SLH KOVO wheel
1 x 63x20 mm (2.5") axle Ø5 Type jets mm aluminium core wheel
1 x 115x29 mm (4.50") Type jets aluminium core wheel
1 x Birch plywood plate 600x300x1.2 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x Birch plywood plate 600x300x3.0 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Carbon tube (L 1000 mm, Ø22 mm, Ø21 mm)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Modelling compound (Plastilin), sculptor's quality 1 Kg
1 x PROXXON - DRILL SET 0,5-3,2MM (10PCS.)
1 x Streamline Stainless Steel Tubing 14.5x9.6x1000 mm
1 x Streamline Stainless Steel Tubing 17.8x12.4x1000 mm
1 x U Profile ABS 3,0x6,0x1000 mm
1 x Profile ABS half cane 4x2.5x1000 mm
1 x ABS rectangular profile 10x5.0x1000 mm
1 x EDGE 540-A 105" (2660 mm)
1 x EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x SLICK 360-B 104" (2640 mm)
1 x silverlot 45% - 1,50x500 mm solder rods (2 pcs)
1 x Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Starter 12v (Max 180 and 30ccm)
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Sealing Iron Sleeve STD
6,529.49EUR
Manufacturers
Manufacturer Info
Kavan
Other products
Languages
Español English
Currencies