Top » Catalog » Hardware » Tools » TC0980

17.50EUR

silverlot 45% - 1,50x500 mm solder rods (2 pcs)
[TC0980]

A specially low running temperature cadmium free silver solder. Melts as soon as steel shows first dark cherry red in daylight. Due to this low running temperature you can silver solder spring steel without causing brittleness. This flexible stainless steel tubing can withstand working temperatures up to 600ºC, using our silver solder this can be soldered at almost the working temperature. This silver solder is ideal for soldering thin wall steel tubing and thin sheet steel such as is used in making header pipes and silencers. As apposed to the flux coated rods you apply the paste flux directly onto the bare joint to be soldered, avoiding a build up of oxidized surface metal. The workpiece needs only to be laid onto a firebrick, heated up with a Propane gas burner until the flux melts giving a clear liquid, this then is the temperature at which the silver solder will run. Allow the join to cool slowly. Remove the flux residue with hot water and a brass or stainless steel wire brush.

temporarily out of stock

Reviews

Customers who bought this product also purchased

Cable silicona macho batt. receptor 30 cm (Graupner)

temporarily out of stock

Spinner propeller pleg. 40 mm / 4,0 mm

temporarily out of stock

Connectors DEANS (T) micro

temporarily out of stock

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Buy Perforated film 100 cm / 50 m
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Aluminium sheet 500x250x0,5mm
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Crimping tool
2 x	1,5x50 mm allen screwdriver
1 x	Ball Link Plier
1 x	Hot Glue Stick RED
2 x
1 x	Copier 2x20 cm pcs
2 x	Dust collector for mould cleaning
2 x	Digital precision scale up to 2000 g
2 x	Digital scale up to 40 kg
2 x	2,5x60 mm allen screwdriver
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Ball Link Plier
1 x	Cut tube
3 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	PPM Encoder Module
1 x	Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
2 x	ABS tube 9.0x8.0x1000 mm
1 x	Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x	Thinwall Stainless Steel Tubing 28x0.6x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	ABS tube 5.0x4.0x1000 mm
1 x	ABS tube 8.0x7.0x1000 mm
1 x	CF tube set (Ø 38 mm y Ø 14 mm)
2 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 9.0x7.0x1000 mm
1 x	ABS tube 14.0x10.0x1000 mm
2 x	ABS tube 3.0x2.0x1000 mm
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x	ABS tube 18.0x16.0x1000 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	ABS tube 2.0x1.0x1000 mm
1 x	ABS tube 5.0x3.0x1000 mm
1 x	CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x	ABS tube 3.0x2.0x330 mm
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Oracover Black 2 m
1 x	Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x	White smoke canister 100 g
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Pilot "Dick" Legends Series (Slimline)
1 x	Extension silicon 25 cm (Graupner)
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	Pilot WWII US Navy Pacific 12" Scale 1/6-1/5
1 x	1/4 Pilot "Heidi"
1 x	Cable grommet Ø 4 mm (4 uds)
1 x	Piloto JET 1:3,5
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	Soporte grifo FESTO (2 pcs)
2 x	Support pump Xicoy X45
2 x	Support Filtro FESTO
2 x	Carbon plate 350x150x3.0 mm
1 x	Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø28 mm)
1 x	Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x	ABS tube 20.0x18.0x1000 mm
1 x	LA500 housing-upper cyclic
1 x	Pistola termica MH 550 micro
2 x	Angle measurer
1 x	Surface Indicator Gauge Small
1 x	Hot Glue Stick BLACK
1 x	Latex Gloves GRIP, size L, box/ 100 pcs
2 x	3,0x60 mm allen screwdriver
1 x	Telemetry interface ALTIS 12 cm
2 x	Concave-Convex sandpaper file 13 mm
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	Handle for PERMAGRIT lime
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Soldering tip for KAVAN soldering iron KAV66.8338
2 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Propeller diller for EME35 and DLE35
1 x	Schul-Malpinsel Gr.5
2 x	Heli blades angle measurer
1 x	Oil FUCHS 1 liter
1 x	Vertical cockpit anchor "tipe F3A" (2 pcs)
2 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x	Hot Glue Stick GREEN
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Digital weight, angle and balance meter BASIC
1 x	Set brocas Ø 2.0-2.2-2.4-2.6 mm (4 pcs)
1 x	Dremel PERMAGRIT thin lime
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Aramid fibre shears Proton®, 21 cm / 8" length
1 x	Universal Filter
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x	Wooden mouth spatulas (150 x 18 x 1.5 mm), 100 pcs
1 x	Mini Infrared Thermomiter
1 x	Mini Lock Grips 2PCS
1 x	Fresa corte diamante Ø 2.35mm (flame)
1 x	LA500 ciclic lever
1 x	Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x	Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x	Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x	ABS tube 10.0x8.0x1000 mm
1 x	CF tube (L 1000 mm Ø030 mm, Ø26 mm)
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Head core
1 x	Head spacer
1 x	Carbon fiber rod 4.0 mmx1000 mm
1 x	Carbon fiber rod 1.5 mm x 2000 mm
1 x	Carbon fiber rod 1.0 mm x 1000 mm
1 x	ABS tube 16.0x14.0x1000 mm
1 x	Piñon motor rotor LA-500
1 x	Wheel keeper washer
1 x	Carbon tube 3K-PW (L 1000 mm, Ø18 mm, Ø16 mm)
1 x	ABS tube 7.0x5.0x1000 mm
1 x	LA500 freewheel bearing
1 x	Carbon tube 3K (L 1000 mm, Ø 8 mm, Ø 7 mm)
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	ABS tube 6.0x5.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Aro pasacable Ø25 mm (4 pcs)
1 x	Brushless ESC 30A F-450
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Angle support XT60 conector
1 x	Soporte filtro FESTO (4 pcs)
1 x	Support Pitot JETI
1 x	Support conector MPX (6 pcs)
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support ECU Xicoy X-45
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support FUEL DOT V3
1 x	SE Ring 330 mm (4 pcs)
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Hovercraft sailcloth
1 x	Landing gear Rocket 400
1 x	Screwdriver for Torx® TX6
1 x	Welder 100W/200V
1 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	5.8G Receiver Helical Antenna with protecting case (SMA plug) 12
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
1 x	SyRen 10A 6V-24V Regenerative Motor Driver
1 x	Medidor ángulos y/o incidencias

4,926.41EUR