1 x | Truck-trailer for gliders 720 x 285 mm |
1 x | Surface Indicator Gauge Small |
1 x | Field folding model stand |
1 x | Propeller balancer |
1 x | Propeller balancer |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Angle of incidence meter |
2 x | Motor DLE 200cc Std |
2 x | Silent-blocks DLE 170M |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
2 x | Ventus 1:4 set of instruments |
1 x | Carbon fiber rod 0.8 mmx1000 mm |
1 x | Carbon fiber rod 16 mm x 1000 mm |
2 x | Carbon fiber rod 20 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Carbon fiber rod 8.0 mmx1000 mm |
2 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber rod 6.0 mmx1000 mm |
1 x | Carbon fiber rod 7.0 mmx1000 mm |
1 x | Carbon fiber rod 2.0 mmx1000 mm |
2 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Squared carbon wing joinner 5x5x220 mm |
1 x | Carbon fiber rod 4.0 mmx1000 mm |
2 x | Carbon fiber rod 1.0 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Carbon fiber rod 1.5 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
2 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Kwik link AL M3 con Clip (2 pcs) |
1 x | Profile ABS Square 2 x 1000 mm |
1 x | Streamline Stainless Steel Tubing 17.8x12.4x1000 mm |
1 x | Ball link duraluminium M3 V1 (10 pcs) |
1 x | Threaded coupler M3 (10 uds) |
1 x | Z type of cable coupler Ø 1 (2 uds) |
2 x | Threaded coupler M2,5 Ø 2 mm (10 pcs) |
1 x | Threaded coupler M2,5 Ø 3 mm (10 pcs) |
1 x | Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs) |
1 x | Threaded coupler M2 (10 uds) |
3 x | Streamline Stainless Steel Tubing 7.5x4.5x1000 mm |
3 x | Profile ABS half cane 2.5x1000 mm |
1 x | Z type of cable coupler Ø 1.8 (2 uds) |
1 x | Threaded coupler ALU M3 Ø 6 (2 uds) |
2 x | Profile ABS Square 1 x 1000 mm |
1 x | Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds) |
2 x | Ball Link M2 with Ball and Hardware, 10 pcs |
1 x | Streamline Stainless Steel Tubing 15.5x8.5x1000 mm |
2 x | ABS angle 1.5x1.5x1000 mm |
1 x | Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs) |
1 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | Aluminium red ball links M3 V1 (10 pcs) |
2 x | U Profile ABS 3,0x6,0x1000 mm |
1 x | Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm |
2 x | Streamline Stainless Steel Tubing 14.5x9.6x1000 mm |
1 x | Couple M4 for wire (10 pcs) |
2 x | Streamline Stainless Steel Tubing 11.5x6.5x1000 m |
1 x | Ball link V1 Ø7 M4/3 (6 uds) |
2 x | ABS angle 2,0x2,0x1000 mm |
1 x | Streamline Stainless Steel Tubing 10.5x5.7x1000 m |
1 x | Threaded coupler Micro M2 Ø 0,8 mm (10 pcs) |
1 x | Threaded coupler ALU M3 Ø 5 (2 uds) |
2 x | Streamline Stainless Steel Tubing 19.5x9.8x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 4 (2 uds) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
2 x | ABS "T" angle 2.0x2.0x1000 mm |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
2 x | U Profile ABS 8,0x4,0x1000 mm |
1 x | Flat Connector 4.0 mm x 1000 mm |
1 x | ABS angle 5,0x5,0x1000 mm |
3 x | T-Connector 4.0 mm x 1000 mm |
3 x | ABS angle 6,0x6,0x1000 mm |
1 x | Profile ABS half cane 2.0x1000 mm |
1 x | Aluminium coupler M2,5/2 with ball bearing (1 pcs) |
3 x | ABS "T" angle 10.0x10.0x1000 mm |
2 x | Profile ABS half cane 3x1000 mm |
1 x | Aluminium coupler M2/2 with ball bearing (1 pcs) |
3 x | ABS angle 10,0x10,0x1000 mm |
1 x | Threaded coupler ALU M2,5 Ø 6 (2 uds) |
3 x | Streamline Stainless Steel Tubing 12.3x7.7x1000 mm |
1 x | Cross Connector 4.0 mm x 1000 mm |
1 x | Brass ball links BS M3 V1 (10 pcs) |
1 x | Canopy Lock V1 M3 Red (2 pcs) |
1 x | 20x1000 mm Ring Strap Back To Back |
1 x | ORACOVER transparent Yellow (10 m) |
1 x | White smoke bombs AX-60 (5 pcs) |
1 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
1 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | LUCAS pilot ARTF |
1 x | Glases Aspen |
1 x | RCEXL Electronic ignition twin A-02 |
1 x | Propeller POWER-PROP 7x7 |
2 x | Opto Gas Engine Kill Switch |
1 x | Selfstarr DLE55, EME55/60, DLA56, SE 55 |
1 x | Support Filtro FESTO |
2 x | Soporte grifo FESTO vertical (1 pcs) |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Profile ABS triangular 4.0x1000 mm 90º |
1 x | Medidor ángulos y/o incidencias |
1 x | Small Crow DLE-170M |
1 x | Absorver mount set for 5-10 Kg models |
1 x | 300 Newtons FEMA absorber |
1 x | 200 Newtons FEMA absorber |
1 x | Carbon fiber rod 0.5 mmx1000 mm |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Connectors banna gold 5,5 mm (M/F) |
1 x | XH male balance (2S) connector (2 pcs) |
1 x | Optotronix Aurora Plug |
1 x | Connectors banna oro 2 mm (M/F) |
1 x | Connectors DEANS (T) |
1 x | Carbon fiber rod 3.0 mm x 1000 mm |
1 x | Carbon fiber flat 1000x3.0x1.0 mm |
1 x | Carbon fiber rod 14 mmx1000 mm |
1 x | Pin to cable coupler M1,6 ⌀ (6 pcs) |
1 x | ABS "T" angle 8.0x8.0x1000 mm |
2 x | Profile ABS half cane 7.0x1000 mm |
1 x | Rubber profile 10-2 mm 2M |
1 x | Profile ABS triangular 4.0x1000 mm 60º |
1 x | Screwdriver for Hexagon 1,27mm |
1 x | Z Bender - S Type Tool |
1 x | Starter Sullivan-STAR 601 |
1 x | Cut tube |
1 x | 1,5x50 mm allen screwdriver |
1 x | Copier 2x20 cm pcs |
1 x | Disposable Injector Bags (30x16cm) 100 pcs |
1 x | XH male balance (4S) connector (2 pcs) |
1 x | Propeller electric carbon 8.5x5 |
1 x | Propeller POWER-PROP 12x9 |
1 x | Propeller electric carbon 8.5x7 |
1 x | Propeller CFK 18x9 |
1 x | Propeller CFK 18x19 |
1 x | Propeller CFK 18x17 |
1 x | Propeller CFK 15x15 |
1 x | Gold antispark 4 mm plug |
1 x | Recess mount-rem. glow plug set |
2 x | Compact on-board starting system (9713) |
1 x | Propeller CFK 18,5x12 |
1 x | Aro pasacable Ø20 mm (4 pcs) |
2 x | Support FUEL DOT V3 |
2 x | Support Pitot JETI |
1 x | Pasacables rectangular 40x15 mm (4 pcs) |
1 x | Recessed MPX connector support (6 pcs) |
1 x | Support pump Xicoy X45 |
1 x | Support conector MPX (6 pcs) |
1 x | Propeller POWER-PROP 10x6 |
1 x | PROPELLER ELECTRIC glass 9,5x6 |
1 x | Propeller POWER-PROP 16x10 |
1 x | Porpeller HUNTER 480 |
1 x | Electromotor starter EME 35cc |
1 x | Starter EM Gear Power 80 |
1 x | Aluminium ignition bad (blue) |
1 x | Propeller RF CFK 13x6.5 |
1 x | Compact on-board starting system (9525) |
1 x | Selfstarr EME35 |
1 x | Propeller CFK 20x13 "white" |
1 x | Propeller CFK 13x7.5 |
1 x | DLE 30 complete electronic ignition |
1 x | Propeller CFK 23x12 |
1 x | Propeller CFK 16x16 Slim |
1 x | MPX PCB "Gender-Changer (5 pcs) |
1 x | PIN Connector female (100 pcs) |
1 x | Conector XT-150 6mm (Set: 5 pares) |
1 x | MPX Support |
1 x | Protector Connector MPX (1 pair) |
1 x | Cylinder ZG 26SC/SLH |
2 x | Support Antena 2.4 Ghz (2 pcs) |
1 x | Support ECU Xicoy X-45 |
1 x | Tube support Ø 6mm (10 pcs) |
1 x | Soporte grifo FESTO (2 pcs) |
1 x | Carbon plate 350x150x3.0 mm |
1 x | Aro pasacable Ø25 mm (4 pcs) |
1 x | Support pumb/filter Xicoy X45 |
1 x | Support XT60 conector (2 pcs) |
1 x | Support Flush MPX Conector (6 pcs) |
1 x | Gasket electric Fuel Pump |
1 x | 150 Newtons FEMA absorber |
1 x | GLOW 2C + accesories |
1 x | Servo Connector Brackets (10 pcs) |
1 x | Mounting frame MPX female connector |
1 x | Conector XT-30 (macho) |
1 x | Conector MR-60 (pareja) |
1 x | XT-60 connector (male) |
1 x | MR30 connector male |
1 x | Wing conexion 2 servos Futaba 50 cm |
1 x | MPX Support (2 pcs) |
1 x | Wing connector 8pin with pin strip, plug & socket |
1 x | Soporte carbono MR30 (2 pcs) |
1 x | Red 4 mm connector holder |
1 x | MPX screwable clips (4 pcs) |
1 x | Bag connector 2 mm |
1 x | MPX PCB "4 Pins", 5 pieces |
1 x | XT-90 connector (pair) |
1 x | MPX screwable clips (5 pcs) |
1 x | Protective Cover for wires Ø 3 mm 1000 mm |
1 x | Metal ring front FEMA |
1 x | Angled clevis with threaded rod M3 |
1 x | Compact on-board starting system (9512) |
1 x | Wheel FEMA 127 mm / 6 mm |
1 x | Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm |
1 x | FEMA DEFLECTOR LEVER FOR WHEEL BRAKE, |
1 x | Glider retract undercarriage 8-16 Kg 2.5-3.2(127 mm wheel) |
2 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | Miniature brass strap hinge, 1 m |
1 x | DA 85 / DA 100 / DA 100 L carburetor |
2 x | ABS angle 3,0x3,0x1000 mm |
1 x | Heli blades angle measurer |
1 x | Mold plugs XT-30 |
1 x | PROXXON - DRILL SET 0,5-3,2MM (10PCS.) |
1 x | Handle for PERMAGRIT lime |
1 x | Llave dinamomterica 74 Z 0 0 21 |
1 x | Latex Gloves GRIP, size L, box/ 100 pcs |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs) |
1 x | Piston ring for DA-50R and DA-100 |
1 x | Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/ |
1 x | Cylinder for ZG20 |
1 x | Crimping sleeves for cable 1.3 mm (10 pcs) |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
1 x | Stainless steel cable Ø 0.52 mm - 15 kp (10 m) |
2 x | ABS rectangular profile 10x5.0x1000 mm |
1 x | Profile ABS triangular 2.0x1000 mm 90º |
1 x | Profile ABS half cane 4x1000 mm |
1 x | Piston ring for ZG 20 and G240RC |
1 x | 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Digital Air Speed Sensor And Pitot Tube Set |
1 x | Streamline Stainless Steel Tubing 6.3x3.5x1000 mm |
1 x | U Profile ABS 5,0x10,0x1000 mm |
1 x | MPX plug mold V1 |
1 x | GPS, Vario and altitude Sensor SBS-01G |
1 x | Hexagonal ball head 2.0 x 50 mm |
1 x | Propeller diller for DLE170 |
1 x | Heli blades angle measurer |
1 x | Mini Infrared Thermomiter |
1 x | Fresa corte diamante Ø 2.7mm (bola) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | Streamline Stainless Steel Tubing 9.0x5.0x1000 mm |
1 x | PIX Hawk with accesories |
1 x | Gyro 3-Ejes REFLEX V2 FMS |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs) |
1 x | Precision wrench L100 mm |
1 x | Hot Glue Stick BLACK |
1 x | PROXXON - SAW BLADE (50MM - 20T) (28017) |
1 x | Heat Seal Iron |
1 x | PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs) |
1 x | Mini-handed clamp |
1 x | Propeller diller for DLE111 and DA85-150 |
|
19,699.87EUR |