1 x | Motor DLE 170 M- Paramotors |
1 x | Propeller FALCON 32,5x11 PUSHER Carbono |
1 x | Motor DLE 430 cc - Paramotors |
1 x | Motor DLE 200cc Premium Muffler |
1 x | Small Crow DLE-170M |
1 x | PYRO 750-50L Competition |
1 x | Combo FOXY C3530-700 + FOXY 80 amp |
1 x | Motor KAVAN PRO 2225-1600 |
1 x | FesEx-Uni6 System |
1 x | Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm) |
2 x | ABS "T" angle 4.0x4.0x1000 mm |
1 x | ABS Strip 1.0x4.0x1000 mm |
1 x | Waterproof adhesive tape, width 19mm, length 25m |
1 x | ABS Strip 1.0x3.0x1000 mm |
2 x | White smoke canister 65 g |
1 x | 25 mm reinforced hinge |
1 x | White smoke bombs AX-9 (10 pcs) |
1 x | Small aluminium horn gold (2pcs) |
1 x | Profile ABS half cane 2.5x1000 mm |
2 x | ABS tube 18.0x16.0x1000 mm |
1 x | Spring lock washer 4.1 mm (20 pcs) |
1 x | Flat washer 2.2 mm (20 pcs) |
2 x | AX-60 starters (5 pcs) |
1 x | SE Ring 330 mm (4 pcs) |
1 x | Black smoke bombs AX-60 (5 pcs) |
2 x | Profile ABS Square 4 x 1000 mm |
1 x | Kit hydraulic brake |
1 x | Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm) |
1 x | SE Ring 480 mm (2 pcs) |
1 x | 15 mm reinforced hinge |
1 x | ABS Strip 1.5x8.0x1000 mm |
1 x | Quicklock washer 1.5 mm (10 pcs) |
1 x | Strip ABS 2.0x10.0x1000 mm |
1 x | Circlik for shaft 1.9 mm (10 pcs) |
2 x | 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs) |
2 x | Ventral support for AX-18/AX-60 |
2 x | Round Rod 3,0x1000 mm |
1 x | Horn for flap control (1 pcs) |
2 x | 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs) |
1 x | Circlik for shaft 1.2 mm (10 pcs) |
1 x | SE Ring 400 mm (2 pcs) |
1 x | ABS tube 3.0x1.0x1000 mm |
1 x | Cable with accesories |
1 x | CM-3 |
1 x | Lock washer 2.7 mm (20 pcs) |
1 x | Cabel charger transmitter GRAUPNER |
1 x | Profile ABS Square 1 x 1000 mm |
1 x | Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH |
2 x | Smoke set "Glider" |
1 x | Green smoke canister 65 g |
1 x | 6 mm red aluminium threaded horn with patella |
1 x | Strip ABS 2.0x5.0x1000 mm |
1 x | Aluminium cap bolt washer M3 blue (8 pcs) |
1 x | ABS Strip 1.0x2.0x1000 mm |
1 x | Horn 13,5x16 mm (2 pcs) |
2 x | Nylon hinge for flaps/gates 27x10,5 (2 pcs) |
1 x | ABS angle 2,0x2,0x1000 mm |
1 x | Cylidric hinge 43 mm Ø 2,5 mm (5 pcs) |
1 x | Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm) |
2 x | Blue smoke canister 100 g |
1 x | Nylon hinge 20x15x0,3 (10 pcs) |
1 x | Green smoke canister 100 g |
2 x | Threaded coupler ALU M2 Ø 4 (2 uds) |
1 x | ABS "T" angle 6.0x6.0x1000 mm |
1 x | SERVO HOLDER |
1 x | Towing hook |
1 x | Ring 320 mm length (5 pcs) |
1 x | Round Rod 6,0x1000 mm |
1 x | RF9 Flight Simulator with Spektrum Controller |
2 x | SE Ring 350 mm (2 pcs) |
1 x | GameCommander USB Universal |
1 x | Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs) |
1 x | Aluminium cap bolt washer M3 red (8 pcs) |
1 x | Pad self adhesive, up to 3mm / 0.12″, (10 pcs) |
1 x | B4-0 rocket charges (6 pcs) |
1 x | Horn 6/20 with M3 Bearing |
1 x | Xplorer3 anemometro |
1 x | DYNAMOMETER S-1580 |
1 x | Quicklock washer 3.5 mm (10 pcs) |
1 x | Marker ties (20 pcs) |
1 x | Nylon hinge 15x0,3 (10 pcs) |
2 x | White smoke canister 140 g |
2 x | Angle of incidence meter |
1 x | Adjustable launching hook |
1 x | 20 mm self adhesive Pinking Tape, saw tooth height 1.0 mm |
1 x | Pin hinge 34x16 mm (10 uds) |
1 x | Horn with ball 55x40 |
1 x | Smoke set "M" |
1 x | Aluminium wide washer M4 Gold (4 pcs) |
1 x | ABS tube 7.0x5.0x1000 mm |
1 x | Connectors banana oro 6,0 mm Ultralight (M/F) |
1 x | ABS Strip 1.5x3.0x1000 mm |
1 x | Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m |
1 x | Connectors banna oro 4 mm (M/F) (ultralight) |
1 x | BALSA trip 3.0x3.0x1000 mm |
1 x | Polyurethan FESTO hose 3x0,5 mm, transparent |
1 x | Carbon wing joinner 13,4 mm Ø 0,48 mm |
1 x | Hose stopper 4 mm |
1 x | Carbon fiber flat 1000x3.0x0.13 mm |
1 x | Buy Perforated film 100 cm / 10 m |
1 x | A/C quality beech plywood 600x300x6.0 mm |
1 x | 1/7 Pilot "Japanese" |
1 x | Mini neumatic retract 3 mm landing gear (Het-rc) |
1 x | Aluminun wheel collar 6 mm Ø (4 uds) |
1 x | Connectors banna oro 3,5 mm (M/F) |
1 x | Carbon fibre tape 200 g/m² (unidirectional) 50 mm |
1 x | BALSA trip 8.0x8.0x1000 mm |
1 x | Aluminun wheel collar 3.5 mm Ø (4 uds) |
1 x | Angled clevis with threaded rod M3 |
2 x | 30 cm MULTIPLEX female connector |
1 x | Landing gear clamp for Ø 2 mm (4 uds) |
1 x | Carbon fiber flat 1000x3.0x0.5 mm |
1 x | Connectors banna oro 4 mm (M/F) |
1 x | Carbon fiber rod 1.5 mm x 2000 mm |
1 x | Nylon threaded block M4 (2 uds) |
1 x | 1,6x1000 mm 2:1 red termoretract tube |
1 x | Balsa panel 8.0x100x1000 mm |
1 x | 1/6 Pilot "Garry" |
1 x | Conector JR Servo male (10 pcs) |
1 x | Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m |
1 x | Aluminun wheel collar 3 mm Ø (4 uds) |
1 x | Carbon fiber rod 12 mm x 1000 mm |
1 x | Avia spare blue cockpit (Top Model) |
1 x | FUNRAY RR |
1 x | E-FUN BUG (ROI-Import) |
1 x | Aero-Master (Aero-naut) |
1 x | Glider IKARUS |
1 x | HERON RR |
1 x | FOX 3000 mm, Fuselage (FMS) |
1 x | Aero-Master Fuselage (Aero-naut) |
1 x | Glider STROLCH |
1 x | IKURA 4.0 m |
1 x | Aero-Master Wings (Aero-naut) |
1 x | Albatros red/white (Top Model) |
1 x | Sliding window 1:2,4 / 1.2,6 Scale |
1 x | BIG MOSNTER |
1 x | Fascination 3600 mm (Top Model) |
1 x | Ka-8b ELECTRIC 6000 mm ARF 1:2.5 (Phoenix Models) |
1 x | Fox 4000 mm with flaps (Airwold) |
1 x | Jeemo Dolly |
1 x | Horn 16,5x20 mm (2 pcs) |
1 x | SlowFlyer control horn (3 pcs) |
1 x | Short adjustable control horn 3x24 |
1 x | LH long black aluminium horn L31xH30 (2pcs) |
1 x | SE Ring 200 mm (2 pcs) |
1 x | SE Ring 300 mm (2 pcs) |
1 x | RH long aluminium horn (2pcs) |
1 x | Set Altimeter SHRead |
1 x | Threaded coupler ALU Left M2,5 Ø 4 (2 uds) |
1 x | Small aluminium horn red (2pcs) |
1 x | Micro control horn T2 Ø 1 |
1 x | Balanceradapter JST-XH (Heli 47G) 2-6 c. |
2 x | Blue smoke canister 140 g |
2 x | Profile ABS half cane 6.0x1000 mm |
1 x | Truck-trailer for gliders 720 x 239 mm |
1 x | Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm) |
1 x | CC 05 |
1 x | Small flex hinge (12 uds) |
1 x | U Profile ABS 1,0x2,0x1000 mm |
1 x | 460 mm EPP Floats |
2 x | Profile ABS half cane 5.0x1000 mm |
1 x | Brass control horn M2 long for wire (10pcs) |
2 x | Angle measurer |
1 x | Challenger ARF (Top Model) |
1 x | PVC transparent black termo-retract battery 185 mm (1 m) |
1 x | ABS 500 x 400 x 1 mm (white) |
1 x | Fiberglass plate 350x150x0.3 mm |
1 x | 1/12 Pilot "Tom" |
1 x | Glass fabric 25 g/m² (1 m²) |
1 x | Fiberglass plate 350x150x1.5 mm |
1 x | Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re |
1 x | Connectors MPX male |
1 x | Glass fabric 80 g/m² (silane, twill) 100 cm x 50m |
1 x | Carbon roving DowAksa / 24k / 1600 tex |
1 x | Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p |
1 x | Conector male bateria 1s Kavan/Walkera 10cm cable |
1 x | 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm |
2 x | Mixers smoke bombs AX-60 (5 pcs) |
1 x | Mould Resin P 10 kg |
1 x | Pin type hinge Al 4,5x70 mm (2 pcs) |
1 x | Ventus 1:4 set of instruments |
1 x | Epoxy Resin L (2.5 Kg) |
1 x | 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs) |
1 x | Strip 3,5x1,75x330 mm |
1 x | 67 mm cylidric hinge Ø 5 mm (4 pcs) |
1 x | ABS rectangular profile 12x6.0x1000 mm |
1 x | ABS Strip 1.5x2.0x1000 mm |
1 x | ABS angle 3,0x3,0x1000 mm |
1 x | Profile ABS half cane 7.0x1000 mm |
1 x | Red smoke canister 140 g |
1 x | PCARD Wireless System |
1 x | Alignment dowels (2 parts, outer-Ø 8 mm) bag/ 100 pairs |
1 x | White smoke bombs AX-18 (5 pcs) |
1 x | ABS angle 4,0x4,0x1000 mm |
1 x | Gates hinge black 30x16 mm (2 pcs) |
1 x | Long pinned hinge (6 uds) |
2 x | Electric rocket starters (6 pcs) |
1 x | 4 LiPo XH>EH adapter |
1 x | "Y" charging 4mm wire (2 IN-1 OUT). |
1 x | Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg |
1 x | Strip 2,5x1,25x330 mm |
1 x | Flap hinge 33x9 mm (6 pcs) |
1 x | AX-60 starters (5 pcs) |
1 x | resin-hardener package L-385 with hardener H-385 (875 g) |
1 x | Rubber profile 6-2 mm 2M |
1 x | Unmounted aluminium pin 6x98 mm (2 pcs) |
|
27,898.48EUR |