Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]


DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.


under request
under request

Reviews
Categories
* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->
  
  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA
What's New?
Brazo servo MKS Doble Metal L:2.5/3 inc
Brazo servo MKS Doble Metal L:2.5/3 inc
26.00EUR
Information
Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
Shopping Cart
1 x ABS tube 12.0x10.0x1000 mm
1 x Steel tube (L 1000 mm Ø3 mm, Ø2,7 mm)
1 x ABS tube 9.0x7.0x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 6.0x4.0x1000 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 5.0x4.0x156 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
2 x ABS tube 14.0x10.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 3.0x2.0x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x ABS tube 3.0x1.0x1000 mm
1 x Z type of cable coupler Ø 2 (2 uds)
1 x Circlick securite
3 x 2 LiPo XH>EH adapter
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
2 x Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
2 x 30 cm BEC cable (male)
1 x White silicone 0,25 qmm wire (150 m)
1 x Threaded coupler M2 (10 uds)
1 x Green silicone 0,25 qmm wire (50 m)
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
1 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x PVC 0,14 qmm servos wire Graupner (100 m)
2 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
2 x TP/TopFuel - JST-EH 4/5S Adapter
1 x PVC 0,08 qmm Graupner servos wire (5 m)
1 x DUPLEX USBa USB-Adapter for Jeti Duplex Items
1 x Brass ball links BS M3 V1 (10 pcs)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Kwik link AL M3 con Clip (2 pcs)
2 x 3 LiPo XH>EH adapter
3 x TrainerCord (master-learner)
2 x Ball link duraluminium M3 V1 (10 pcs)
1 x Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x Silicone 0,14 qmm servos wire Graupner (5 m)
1 x PVC 0,14 qmm servo wire Futaba (5 m)
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x CC 02
1 x 10m servo "Premium" wire (white/red/blue)
3 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
2 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x CM-3
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x White silicone 0,25 qmm wire (100 m)
1 x Black silicone 0,25 mm² wire (25 m)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
2 x MPX-Dean "T" Adapter
3 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x JR silicone servo wire 0,35 qmm / 5m
2 x CC 03
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x Silicone 0,25 qmm servos wire Graupner (100 m)
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Silicone 0,50 qmm servos wire Graupner(100 m)
2 x Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x Couple M4 for wire (10 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x Ball link Aluminio M3 (2 pcs)
1 x Angled clevis with threaded rod M3
2 x BEC 3A FOXY
1 x Dean "T" - Futaba Adapter
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
2 x Aluminium red ball links M3 V1 (10 pcs)
1 x 30 cm BEC cable (female)
1 x Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x Z type of cable coupler Ø 1 (2 uds)
1 x Threaded coupler ALU M2 Ø 4 (2 uds)
1 x 100m servo "Premium" wire (white/red/blue)
1 x Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x Parachute P4
1 x Trike XL motor set (motor+esc+prop)
2 x Paramotor Kit Camo H1.5/ Ben Red
1 x MAX pilot ARTF
1 x Parachute BACKUP X100
2 x LUCAS pilot ARTF
1 x Opale Rucksack
2 x Paramotor Trike XL
1 x Rescue 1,8m2 / BackPack
1 x Para-RC Mix
1 x Aramid 50 daN 50 m
1 x Ferrita 17x10x6.5 mm
1 x Extension silicon 30 cm female (Futaba)
1 x Spring lock washer 2.1 mm (20 pcs)
1 x Ball link M3 (10 pcs)
2 x 22 mm Cut Disc Proxxon/Dremmel
2 x Switching module high voltage SXH
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x Silicone black 4,0 qmm wire ( 1 m)
4 x Prolonguer for Balancer Thunder Power 6S
1 x Cabling for Fox MDM1 wings
2 x Connector Sub-D 2+5 Female
1 x Silicone black 1,0 qmm wire ( 1 m)
1 x Fiberglass heat shield Ø 8 mm 1000 mm
2 x CC 05
2 x Connector CAN 15
1 x Cable Cargador FUTABA
2 x Pulley brass 5/1,5 (2 pcs)
1 x Turnbuckle M2x29/43 (2pcs)
1 x Pin 2,5 to cable coupler M2,5 ⌀ pin 2,5 (6 pcs)
1 x Stainless steel 4 m Pull-Pull complet set (max 20 kg)
1 x Pulley brass 16/2 (2 pcs)
1 x Micro clevis (10 uds)
1 x Pulley brass 6/1,5 (2 pcs)
1 x Micro clevis 0.8 mm(10 uds)
1 x Kwik link with arm M3xM2xL24
1 x Pulley brass 4/1,5 (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Rubber bushing with bracket "B" type (2 pcs)
1 x Round Rod 1.0x3.5 cm
2 x Pulley brass 2,5/1 (2 pcs)
1 x Turnbuckle M1,6x20/30 (2pcs)
1 x Porta Kwik link M3 3 mm (2 pcs)
2 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Silicone 0,35 qmm servos wire Graupner(100 m)
2 x 4 LiPo XH>EH adapter
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x Aluminium blue ball links M3 V1 (10 pcs)
2 x CC 01
1 x White silicone 0,25 mm² wire (25 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x Adapter lead MPX/EC3
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
3 x Round Rod 4,0x1000 mm
1 x ABS Strip 1.5x3.0x1000 mm
1 x Cabel "Y" 30 cm (Futaba)
1 x Cabel "Y" 15 cm
1 x Cable silicona macho batt. receptor 30 cm (Graupner)
1 x Extension silicon 35 cm male (Futaba)
1 x DPSI OCP Overload protection
1 x Extension S-Bus 1-2 silicon 30 cm FUTABA
1 x Sanyo TX Battery Eneloop 9,6 V 2500 mAh
1 x Sanyo TX Battery Eneloop 9,6 V Futaba
1 x Battery bed V2_S (black)
2 x Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
2 x ABS Strip 1.0x4.0x1000 mm
1 x Cable silicona macho batt. receptor 30 cm (Futaba)
1 x DPSI LR-S (with push buttons)
1 x Premium servo extension 50cm
2 x Extension silicon 10 cm (Graupner)
1 x PERMAGRIT Sanding Block 45° 140x51 mm
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Prolongador S-Bus JR/JR 20cm
1 x Dremel PERMAGRIT 18 mm round lime
1 x Tube bender
1 x Fresa corte diamante Ø 1.4mm (bola)
1 x DPSI Micro - DualBat 5.9/7.2 MPX-2xMPX dual
2 x Futaba Female 40 cm extension
1 x Cable S.BUS 3 salidas 100 mm
2 x Premium servo extension 75cm
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x RX Battery Eneloop 6,0 V JR 2500 mAh
1 x Sanyo RX Battery Eneloop 4,8 V JR
2 x Battery LiFe TopFuel 3100 mAh 4s MTAG 30C
1 x Sanyo Eneloop AA 1,2 V 2400 mAh battery
1 x Battery Protection Circuit Board 22.2v 6s
1 x Sanyo RX Battery Eneloop 6,0 V JR
1 x Sanyo Eneloop AA 1,2 V battery 2000 mAh
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Interruptor SPS 70v 60/120A
3 x Opto Gas Engine Kill Switch
1 x Interruptor RX/Batterie
1 x Extension 5 lipos JST/C - JST
1 x wing/fuselage connector for 3 pines AWG 20-24
2 x Extension 2/3 lipos JST/C
1 x SPS 70V 140/280 A
2 x SBEC Jeti
1 x SPS 70V 100/200 A
2 x Multi-adapter balancer JST - TP
1 x USB HLS prog. interface
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Electric Landing Gear ODYSSEY +GS200 (Elektron Retracts)
1 x PWC4 wing/fuselage connector for 4 servos
1 x ER40 Front Leg (with wheel 80mm)
2 x MAX BEC
1 x Turnbuckle M2x22/35 (2pcs)
1 x BRASS CONTROL HORN M3x16 mm 2pcs
1 x Electronic switch JETI SP06 Opto
2 x Extension 5 lipos JST - JST/C
2 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
3 x SBEC 40
1 x MPS Gas-Cap-Powerswitch
3 x Opto Gas Engine Kill Switch
1 x DPSI magnetic switch actuator (housing)
3 x Multi-adapter balancer JST/C - TP
2 x Extension 2/3 lipos JST - JST/C
3 x Selfstart electronic switch
2 x Switc electronic 30 Amp
1 x Long Switch On/Off micro
2 x Male/Female prolonguer for Balancer Thunder Power 6S
2 x Male Prolonger TP 4/5S
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Extension 6 lipos XH > EH
1 x SWTU2 switch
2 x PowerBox SparkSwitch RS
1 x Electronic switch JETI SP6 0-15v/6A
2 x Pins M connect Multipin connectors AWG 20-24
1 x PSC 5
1 x Extension 5 lipos JST/C
1 x Short Switch On/Off micro
1 x PSC 6
2 x SPARK Switch 7.4v
2 x TP/TopFuel - XH 2/3S Adapter
1 x Female connector for 6 pines AWG
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x USB interface ALTIS
1 x SBEC 30 D
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x wing/fuselage connector for 16 pines AWG 20-24
1 x Servo slow down unit (0,7-14,7 sec )
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x SPARK Switch 5.9v
2 x UBEC 6A KAVAN
1 x Female connector JST SH 1.0mm with 10 cm wire
2 x SPARK Switch 12v
1 x ER-40eVo Set A [2x ER40 + RB-45]
1 x Nose leg 155 mm with wheels 70 mm
1 x Electric Landing Gear "Black Edition" BULL Mo1 2.6 GS200 (Electr
1 x Actuator Electric 25 mm
1 x Electric Landing Gear AVANTI XS (Elektron Retracts)
1 x GS-200 Electronic
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x ER-40eVo Set B [Complet Set + GS200]
1 x Electric Landing Gear PC-21 Skymaster (Elektron Retracts)
1 x Brazo servo aluminio 1.25/1.5" Futaba/MKS/Savox
1 x Electric Landing Gear "Black Edition" ULTIMATUM 2.0 (Elektron Re
1 x SPS Remote switch actuator
1 x Ball Link ALU M3 - RH (1 pcs)
1 x Carbon tube 3K-PW (L 1000 mm, Ø8 mm, Ø6 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Hard brass tubing (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Fiberglass tube 6/4x1000mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø14.0 mm, Ø12.0 mm)
1 x Propeller APC 12x6 SF
1 x Extension PVC 150 cm (Graupner)
1 x Strip 2,5x1,25x330 mm
1 x Cilinder joint for G230RC/G260RC
1 x Silencer for ZG22, ZG23, ZG231SLH, G2D96-D
1 x Header ZG 45/62, "wide"
1 x Silencer ZG62, new version
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø7.1 m)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Pulley brass 2,5/1 (2 pcs)
1 x Hard brass tubing (L 1000 mm, Ø10.0 mm, Ø9.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø11.0 mm, Ø10.0 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø27 mm)
1 x Carbon fibre tube -TAPERED- 3k-PW (10 x 5 x 0.3) x 880 mm
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x Hard brass tubing (L 1000 mm, Ø8.0 mm, Ø6.1 m)
1 x Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 14x12 Electric
1 x Propeller APC 12x8 Electric
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 10x3,8 SF Electric Pusher
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 10x5 Electric
1 x PropCover 16-20" (2 pcs)
1 x PropCover 16-20" (1 pcs)
1 x Wing OXY 5,0 m2
1 x Extension silicon 30 cm male (Graupner)
1 x Extension 100 cm (Futaba)
1 x Strip 3,5x1,75x330 mm
23,033.76EUR
Manufacturers
Manufacturer Info
Emcotec
- Emcotec Homepage
- Other products
Notifications
NotificationsNotify me of updates to DPSI Ampere & Voltage bundle
Reviews
Write ReviewWrite a review on this product!
Languages
Español English
Currencies
Insurance
multiseguros


Copyright © 2024 ROI Import
Powered by osCommerce