Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

SAITO FG-120 TSS Boxer 4T
1,800.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Brass control horn M4 short for wire (4 pcs)
2 x	Horn 5/20 with M2 Bearing
1 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	Brass control horn M4 long for wire (4 pcs)
1 x	6 mm M3 variable inclined horn
2 x	6 mm M3 variable horn
1 x	Cable with accesories
2 x	Horn 6/35 with M3 Bearing
1 x	Horn for flap control (1 pcs)
2 x	Control horn long w/ball
1 x	Cable control set
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Horn DUBRO 1/2A
1 x	Brass control horn M2 long for wire (10pcs)
1 x	Horn 13,5x16 mm (2 pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Brass control horn M2 large for wire (2pcs)
2 x	Horn mando small (2 pcs)
2 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	20 mm carbon horn
2 x	Horn 5/10 with M2 Bearing
1 x	Adjustable brass horn threaded M3
1 x	Extra long horn 60x30
2 x	Brass control horn M2 short for wire (2 pcs)
1 x	6 mm red aluminium threaded horn with patella
1 x	Horn 20x28,5 mm (2 pcs)
2 x	5 mm M2 variable horn
1 x	6 mm blue aluminium threaded horn with patella
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
2 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Stainless steel cable Ø 0.62 mm (10 m)
2 x	Crimping sleeves for cable 0.70 mm (10 pcs)
2 x	Stainless steel cable Ø 1.3 mm (10 m)
1 x	Cabin latch Fox MDM1 4m (pair)
1 x	Aluminium alloy coupler for carbon tube 6/M4
2 x	Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x	Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x	Canopy Lock V1 M3 Blue (2 pcs)
2 x	Micro screw-lock pushrod conn snap Ø 1 mm (2 uds)
2 x	Crimping sleeves for cable 1.3 mm (10 pcs)
2 x	USB Mini Camera endoscope
1 x	Circlik for shaft 1.9 mm (10 pcs)
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x	Militarian pilot "Kamikaze" size 9cm (Slimline)
1 x
2 x	Horn 6/27 with M3 Bearing
1 x	Long ball link M3 (6 uds)
1 x	Interface Realflight Simulator
2 x	Horn 6/20 with M3 Bearing
2 x	PIT (Aero-Naut)
1 x	METEOR 1.000 mm kit
1 x	Soporte grifo FESTO (2 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Support ECU Xicoy X-45
1 x	Support Pitot JETI
1 x	Angle support XT60 conector
2 x	IKARUS plane
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support Flush MPX Conector (6 pcs)
1 x	Futaba 38 mm servo arm with ball link
1 x	SD HC 8 GB
1 x	Futaba 14/20 mm servo pull-pull double arm with ball link
1 x	Futaba 46 mm servo arm with ball link
1 x	Futaba 20 mm servo arm
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Lead with adhesive (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm (2 uds)
1 x	Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x	Steering arm 12 mm Ø 4 mm
2 x	Allen wheel collar M3x5
1 x	Wheel collar 5 mm Ø (4 uds)
1 x	Snap long M2 (10 uds)
1 x	Split pin 1.6x16 mm (10 uds)
1 x	Fully Threaded Steel Rod SUS303 65 mm M3 (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 55
1 x	Fully Threaded Steel Rod alumin 40 mm M3 (2 pcs)
1 x	Aluminun wheel collar 6 mm Ø (4 uds)
1 x	Wing bolts M6 Steel screw Red (2 pcs)
1 x	Triple rod con. 2mm Pushrod (2 pcs)
1 x	Tip wing protector 40x14 (2 pcs)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x	Aluminun wheel collar 5 mm Ø (4 uds)
1 x	Pushrod octagone 3/2 with coupler M2
1 x	ABS tube 16.0x14.0x1000 mm
1 x	ABS tube 7.0x5.0x1000 mm
1 x	ABS tube 8.0x6.0x1000 mm
1 x	Fiberglass tube 6/4x1000mm
1 x	Hard brass tubing (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x	Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x	ABS tube 12.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø2.0 mm, Ø1.2 mm)
1 x	ABS tube 5.0x4.0x156 mm
1 x	ABS tube 7.0x6.0x1000 mm
1 x	ABS tube 3.0x2.0x330 mm
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Hard brass tubing (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
1 x	Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x	ABS tube 4.0x3.0x1000 mm
1 x	ABS tube 5.0x4.0x1000 mm
1 x	Carbon tube (L 1000 mm, Ø3 mm, Ø2 mm)
1 x	Xoar Electric Beechwood Prop 15x8
1 x	Xoar Electric Beechwood Prop 21x10
1 x	Snap short M2 (10 uds)
1 x	28x5 mm wires output (2 pcs)
1 x	Cockpit aluminium closing 5.4g
1 x	SUS wire 3m (nylon coated)
1 x	Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x	Clip mini fixing for wing (2 pcs)
1 x	11 mm Rubber pads (14 pcs)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Fully Threaded Steel Rod alumin 90 mm M2,5 (2 pcs)
1 x	Stainless steel cable Ø 0.5 mm (20 m)
1 x	Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x	Pushrod octagone 4/3
1 x	Fully Threaded Steel Rod alumin 90 mm M3 (2 pcs)
1 x	Steering arm 16 mm Ø 3 mm (2 uds)
1 x	Cockpit metalic closing
2 x	41x5,5 mm wires output (2 pcs)
1 x	90 mm rods + T patellas set for direction control
1 x	Fully Threaded Steel Rod Duralumin 120 mm M3 (2 pcs)
1 x	38x4,5 mm wires output (2 pcs)
1 x	STEERING FRONT WHEEL SYSTEM BIDULE 111
1 x	Crimping sleeves for cable 0.85 mm (10 pcs)
1 x	Fully Threaded Steel Rod Duralumin 60 mm M3 (2 pcs)
1 x	Fully Threaded Steel Rod Duralumin 34 mm M3 (2 pcs)
1 x	Wing bolts M3 Steel screw Red (2 pcs)
1 x	45 mm rods set for direction control
1 x	Fully Threaded Steel Rod SUS303 70mm M3 (2 pcs)
1 x	Cockpit latch closing I=10 mm
1 x	80 mm rods set for direction control
1 x	Wing bolts M6 Steel screw Blue (2 pcs)
1 x	Cap closure 33/23.5mm (2 uds)
1 x	Turbo Timber Evolution 1.5m PNP
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	Cap Hispano Aviación
1 x	CC 05
1 x	DRACO 2.0m PNP
1 x	Turbo Timber Evolution 1.5m BNF
1 x	Connector Sub-D 2+5 Male
1 x	Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x	DRACO 2.0m Helice 14.5x9 4-Blade
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	EDGE 540-A 105" (2660 mm)
1 x	SLICK 360-A 104" (2640 mm)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
2 x	TWIST planeador gomas
1 x	Ball link M2 (10 pcs)
1 x	Indoor landing gear set
1 x	Cable coupler M2x66 (2 uds)
1 x	Horizontal servo holder
1 x	6 mm ball link M3 (10 pcs)
1 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Aluminium tube with fibreglass case ø35x1.5mm, 500mm
1 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x	Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x	Carbon tube 3K-PW (L 1000 mm, Ø14 mm, Ø12 mm)
1 x	DUPLEX R7 receiver REX Assist
1 x	DUPLEX R6 receiver REX Assist
1 x	Receiver DUPLEX R9 EX 2.4 GHz
1 x	Receptor DUPLEX REX R9 Slim Assit
1 x	DUPLEX 2.4EX Satellite receiver Rsat 2
1 x	Crystal Universal RX 35.140 Ch 74
1 x	EasyFLY Addon
1 x	Crystal Universal RX 35.020 Ch 62
1 x	Snap pin for micro clevis (10 uds)
1 x	45 mm rods + T patellas set for direction control
1 x	90x75 mm standart servo cover
1 x	Ball link M2,5 (10 pcs)
1 x	Ball link M3 (10 pcs)
1 x	Brazo Servo XTorque 52 mm HITEC 25T-6
1 x	6 mm hexagonal ball link M3 (10 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Vertical servo holder
1 x	Horns indoor
1 x	Ball link M3 (10 pcs, flat ball)
1 x	30 cm DEANS female connector
1 x	Extension for SensorSwitch 60cm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m

10,232.97EUR