Top » Catalog » Hardware » Power supply system/Data Recordi » Emcotec » EMCA15055

149.95EUR

DPSI Ampere & Voltage bundle
[EMCA15055]

DPSI Ampere & Voltage bundle

Product description
DPSI Ampere - Produktbeschreibung
Powerful battery backer with peak current capacity of up to 60 ampere. The DPSI Ampere & Voltage bundle can be used as dual power supply for receivers, turbines or similar electric consumers of R/C models.
System stability of the DPSI Ampere & Voltage bundle is ensured by connecting two batteries. If one battery fails, safe operation is guaranteed by the second battery. Normally, both batteries are discharged symmetrically and simultaneously (at the same time). Due to the parallel connected batteries the current is split in half for each battery.
The DPSI Ampere & Voltage bundle is switched ON/OFF electronically by placing a magnet on the corresponding position on the device housing.
The DPSI Ampere & Voltage bundle can handle a permanent current of 50 ampere. So it is the perfect solution for all high current applications. Thanks to an integrated charging connector both connected batteries can be charged simultanously with only one charging device.
The DPSI Ampere & Voltage bundle is the first EMCOTEC battery backer that can be operated with 3S LiPo batteries or batteries with voltages up to 13.2 volts. So the module is much more than a conventional dual power supply for receivers. Due to the higher voltage also devices such as turbines can be reliably powered with the DPSI Ampere & Voltage bundle.
Function overview
Loss-free switching function without diodes.
Integrated electronically fail-proof switches separately for each battery without using the micro controller (CSHC).
Dual safeguarded power off logic. Even a failing part does not lead to a power out.
IVM (Intelligent Voltage Monitoring). Battery voltage monitoring with acoustic warning signals for all supported battery types (NiMH, LiIon, LiPo, LiFePO4).
Booster for safe control of the power switches even at extremely low voltages or short power interruptions (MBOOST).
DPSI Voltage - Product description
Voltage regulator module for battery backer DPSI Ampere.
The module must be plugged to the output side of the DPSI Ampere. With a jumper regulated output voltages of 6 volts, 6.6 volts or 7.2 volts can be selected. Furthermore the unregulated battery voltage can be used additionally on a secound output.
Delivery includes dual power supply DPSI Ampere, voltage regulator DPSI Voltage, programming jumper, switching magnet with EMCOTEC patch as well as German and English operating instructions.

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

PT-22 Ryan Recruit 2290 mm (SEAGULL)
560.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Threaded coupler M3 (10 uds)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	2,3 mm Prop Drive Günther M4
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	Locking cable tie 2.5x100 (uds)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Adapter 3,0 mm M8
1 x	Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
2 x	Adapter 3,2 mm M8
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
2 x	3 mm Short Prop Adapter M5
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Locking cable tie 4.6x203 (uds)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x	Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x	Adapter 4,0 mm M6
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Adapter 3,2 mm M6
1 x	Adapter 4,0 mm M8
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	2 mm Prop Adapter M5
2 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Spinner NUT M4
1 x	Spinner Alumin. fixed propeller 40 mm / 3,0 mm
2 x	Spinner propeller pleg. 40 mm / 4,0 mm
2 x	Spinner Alumin. propeller pleg. 30 mm / 2,3 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Spinner propeller pleg. 40 mm / 5,0 mm
1 x	Spinner negro 40 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Spinner propeller pleg. 30 mm / 3,2 mm
1 x	Spinner propeller pleg. 40 mm / 3,0 mm
1 x	Spinner Alumin. propeller pleg. 30 mm / 3,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Spinner propeller pleg. 30 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 4,0 mm
1 x	Spinner NUT 1/4x28
2 x	Cable control set
1 x	Spinner Alumin. propeller pleg. 40 mm / 4,0 mm
1 x	Spinner propeller pleg. 40 mm / 3,2 mm
1 x	Control horn long w/ball
1 x	Flat washer 1.7 mm (20 pcs)
1 x	Threaded coupler M2 (10 uds)
1 x	12 mm dogdrive props
1 x	AXI 2808/16 V2
1 x	AXI 2826/10 V2
1 x	1804 2400KV Brushless Motor Qav 250 mini
1 x	AXI 2814/20 V2 Long
1 x	MIG AC 400 /14
2 x	Motor XPower F2915/12 XLight
1 x	Radial heatsink for MPJ AC25/35-xx motor
1 x	Cooler motor type 400
1 x	Kwik link aluminio IZD. M3 L: 30mm (2 uds) pin Ø 2 mm
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	Conector JAPAN G2 Set 5 pares
1 x	Conector FUTABA Servo female (10 pcs)
1 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x
1 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Crimping tool
1 x	Carbon fiber rod 2.0 mmx1000 mm
2 x	58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	ABS angle 3,0x3,0x1000 mm
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Streamline Stainless Steel Tubing 10.5x5.7x1000 m
2 x	Oracover Black 2 m
1 x	100g Flux Paste for Silver Solder
1 x	Monokote PLATINO metalizado (1.8x0.65m)
1 x	Conector JR Servo male (10 pcs)
1 x	ABS "T" angle 4.0x4.0x1000 mm
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	1,2x1000 mm 2:1 red termoretract tube
1 x	Conector XT-30 (hembra)
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Profile ABS Square 2 x 1000 mm
1 x	Profile ABS half cane 4x2.5x1000 mm
1 x	Boxed KIT OF 7 Rotary Burrs FINE
1 x	30 cm MULTIPLEX female connector
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	12,7x1000 mm 2:1 green termoretract tube
2 x	4,8x1000 mm 2:1 black termoretract tube
2 x	Monokote BLANCO jet (1.8x0.65m)
1 x	Conector FUTABA Servo male (10 pcs)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	Oracover Black 10 m
1 x	ABS angle 5,0x5,0x1000 mm
1 x	Connector CAN 15
1 x	EC-Cutter
1 x	Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Ball Link Plier
2 x	12.7 mm 2:1 black termoretract tube
2 x
2 x	Profile ABS half cane 5.0x1000 mm
1 x	1,6x1000 mm 2:1 black termoretract tube
1 x	Digital scale up to 40 kg
1 x	Conector Servo female 4 pines
1 x	"S" set for boats
1 x	Brass rod Ø 1.0 mm x 1000 mm
1 x	29,0 mm propeller (rigth propeller)
1 x	14 mm Portholes for screws (10 pcs)
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	10 mm portholes (10 pcs)
1 x	Straightened rod Ø 2.0 mm x 1000 mm
1 x	Crimping tool
1 x	290 mm 290 mm M5x18 mm shaft ship
1 x	Straightened rod Ø 1.5 mm x 1500 mm
1 x	36,0 mm propeller (rigth propeller)
1 x	Straightened rod Ø 0.5 mm x 1000 mm
2 x	Straightened threaded rod M2-1m
1 x	Brass rod Ø 0.5 mm x 1000 mm
1 x	290 mm M4/4 mm Prop shaft
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
1 x	Straightened threaded rod M3 - 1m
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Motor XPOWER F2919/10 F5J Light
1 x	XPower XC4226/12 LS
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Profile ABS half cane 6.0x1000 mm
1 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x	Flat Connector 4.0 mm x 1000 mm
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	DPSI 2001 RV
1 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Propeller RABOESCH M4 55 mm (5 Blades) (Left hydropropeller)
1 x	Propeller RABOESCH M4 50 mm (3 Blades pr) (Left hydropropeller)
1 x	Propeller RABOESCH M5 130 mm (4 Blades) (Left hydropropeller)
1 x	Propeller RABOESCH M4 60 mm (4 Blades) (Right hydropropeller)
1 x	Housing Ø 11 mm (20 pcs)
1 x	Farol Ms. 3v/10 mm
1 x	105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x	Starter EM Gear Power 80
1 x	Adapter 3,0 mm M6
1 x	19 mm 2:1 black termoretract tube
1 x	NF-3X-350 set
1 x	PVC yellow transparent battery termo-retract 68 mm (1 m)
1 x	1,5x50 mm allen screwdriver
1 x	Jet Afterburner Simulator NF-Jet2
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	PVC yellow battery termo-retract 69 mm (10 m)
1 x	PVC blue transparent battery termo-retract 68 mm (10 m)
1 x	Vacuum pump 12 CFM
1 x	3 mm Long Prop Adapter M5
1 x	1,6x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 red termoretract tube
1 x	Oracover Azul Cielo 2 m
1 x	PVC transparent battery termo-retract 51 mm (1 m)
1 x	USB Adaptor OPTronics
1 x	DUPLEX 2.4EX Central Box 210
1 x	Carbon fiber rod 3.0 mm x 1000 mm
1 x	Hot Glue Stick RED
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Mini-handed clamp
1 x	Servo Connector Brackets (10 pcs)
1 x	Connectors MPX black male
1 x	Profile ABS triangular 4.0x1000 mm 60º
1 x	Fresa corte diamante Ø 2.3mm (bola)
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	OPTOTRONIX Aurora LCU
1 x	DPSI Micro - RCS
1 x	DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x	DPSI OCP Overload protection

5,273.90EUR