Top » Catalog » Hardware » Power supply system/Data Recordi » PowerBoxSystems » POWER4450

439.01EUR

PowerBox Competition SR2
[POWER4450]

Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Beaver DHC-2 DeHavilland 3000mm White/Black CYMODEL
975.02EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Buy Perforated film 100 cm / 10 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
2 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Buy Perforated film 100 cm / 50 m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Buy Perforated film 100 cm / 20 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	ABS 500 x 400 x 2,0 mm (white)
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x	Spikes Band (5 m)
3 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	14x60 mm Mini rings Tie Wraps (4 pcs)
1 x	20x200 mm battery rings
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
3 x	Kwik link AL M3 con Clip (2 pcs)
1 x	SE Ring 250 mm (2 pcs)
2 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Threaded coupler M3 (10 uds)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	SE Ring HACKER 300 mm (2 pcs)
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	BALSA triangular 8x8x1000 mm
2 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Beech dowels 4.0 x 1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
2 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	Pine wood slat 3.0x7.0x1000 mm
2 x	BALSA trip 5.0x5.0x1000 mm
2 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Walnut wood slat 3.0x3.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Silent-blocks DLE 170M
1 x	Extension 30 cm (Futaba)
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Fiberglass plate 350x150x2.0 mm
1 x	Extractor piñones 2.3/3.2 mm
1 x	White smoke canister 100 g
1 x	Red smoke canister 65 g
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Aluminium sheet 500x250x0,5mm
1 x	Recessed MPX connector support (6 pcs)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Pulley brass 14/2 (2 pcs)
2 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Pulley brass 12/2 (2 pcs)
1 x	Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
2 x	Motor DLE 200cc Std
1 x	Glass fabric 163 g/m² 130cmx10m (Interglas 92105, aero, finish
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Cable coupler M2,5 (2 pcs)
2 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Pulley brass 6/1,5 (2 pcs)
1 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Pilot Lotsenboot
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Blades 330mm
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
2 x	Balsa panel 1.5x100x1000 mm
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Regulador Actro-Marine 80A
1 x	Birch plywood plate 600x300x4.0 mm
2 x	Birch plywood plate 600x300x1.2 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Trailing edge BALSA 35x8x1000 mm
1 x	Pull-Pull complet set with CF rudder double servo arm
1 x	Propeller 12x6 Falcon electric
1 x	Motor DLE 170 M- Paramotors
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	DUPLEX 2.4EX Central Box 320
1 x	DSM 10 Dual Switch Mixer
1 x	Angled clevis with threaded rod M3
1 x
1 x	Car Charger DC/DS-16
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Turnbuckle M3 33x49 (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
2 x	Cable coupler M2 (10 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x	Kwik link with arm M3xM2xL24
1 x	Small Crow DLE-170M
1 x	Micro clevis (10 uds)
1 x	Pin 2,0 to cable coupler M2,0 ⌀ (6 pcs)
1 x	Kwik link aluminio M3 L: 30mm (6 uds) pin Ø 2 mm
1 x	Glow Plug Clip 1.3 Ah
1 x	Propeller FIALA 15x8 3-Blade
1 x	DUPLEX 2,4GHz MRPM EX
1 x	PPM to Jack link - Tx Black (mono) DC/DS Tx DUPLEX 2,4EX
1 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Battery RX JETI LiIon RB 5200 7.2v

10,933.15EUR