Top » Catalog » Hardware » Power supply system/Data Recordi » PowerBoxSystems » POWER4450

439.01EUR

PowerBox Competition SR2
[POWER4450]

Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Ferrita 27x14x7 mm
1 x	Ferrita 17x10x6.5 mm
1 x	Ferrita con funda
3 x	L-Connector 4.0 mm x 1000 mm
3 x	Profile ABS Square 2 x 1000 mm
2 x	U Profile ABS 5,0x10,0x1000 mm
2 x	U Profile ABS 2,0x4,0x1000 mm
2 x	Angle of incidence meter
2 x	Surface Indicator Gauge Small
3 x	Angle measurer
1 x	Propeller POWER-PROP 14x9
2 x	Paramotor BackPack XXS 2
1 x	Straightened rod Ø 14.0 mm x 1000 mm
2 x	Trike XL motor set (motor+esc+prop)
1 x	Wing OXY 0,5 pulgadas2
3 x	Windsock Ozone L - 700 mm
1 x	LASER 73" 1.85m (05) PILOT
1 x	Propeller POWER-PROP 13x9 Izda
2 x	Parachute PV6 for F3J
2 x	Ballast 700gr OPALE
1 x	Straightened rod Ø 5.0 mm x 1000 mm
1 x	25 mm reinforced hinge
1 x	Cable S.BUS 3 salidas 100 mm
1 x	Connectors banna oro 0,8 mm (M/F)
1 x	Yellow smoke canister 100 g
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Socket head ball link M3 (2 uds)
1 x	Starter EM Gear Power 250
1 x	Hexagonal ball head 2.0 x 50 mm
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	39,0 mm propeller (rigth propeller)
1 x	Oils Pumps Empty (1 liter)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
3 x	Profile ABS triangular 6.0x1000 mm 90º
3 x	ABS angle 3,0x3,0x1000 mm
1 x	U Profile ABS 1,0x2,0x1000 mm
1 x	Streamline Stainless Steel Tubing 11.5x6.5x1000 m
2 x	Cross Connector 4.0 mm x 1000 mm
3 x	ABS angle 6,0x6,0x1000 mm
3 x	ABS "T" angle 2.0x2.0x1000 mm
2 x	Profile ABS triangular 4.0x1000 mm 60º
2 x	L-Connector 1.0 mm x 1000 mm
1 x	Profile ABS half cane 2.5x1000 mm
2 x	Rubber profile 10-2 mm 2M
1 x	ABS "T" angle 8.0x8.0x1000 mm
3 x	ABS "T" angle 10.0x10.0x1000 mm
2 x	L-Connector 1.5 mm x 1000 mm
2 x	Profile ABS half cane 5.0x1000 mm
2 x	ABS angle 4,0x4,0x1000 mm
2 x	Profile ABS half cane 4x1000 mm
1 x	Profile ABS half cane 3x1000 mm
1 x	Profile ABS Square 4 x 1000 mm
1 x	ABS rectangular profile 12x6.0x1000 mm
4 x	Profile ABS Square 3 x 1000 mm
1 x	Profile ABS Square 1 x 1000 mm
1 x	Profile ABS half cane 8.0x1000 mm
2 x	Rubber profile 8-2 mm 2M
1 x	Flat Connector 4.0 mm x 1000 mm
2 x	Profile ABS half cane 2.0x1000 mm
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	USB Adaptor OPTronics
1 x	SINGLE FUELING VALVE GASOLINE MK2 SMALL
1 x	Parachute BACKUP X100
1 x	Mobile Terminal
1 x	GPS Sensor + Logger OPTronics
1 x	OS 40-FG 4T Motor
2 x	LUCAS pilot ARTF
1 x	Tren retractil ULTIMATUM 1.5 combo ER30 SEt B (ControlBox)
1 x	wing/fuselage connector for 12 pines AWG 20-24
1 x	SPARK Switch 7.4v
2 x	FX three-position switched channel, long
1 x	JETImodel Addcap 1640
1 x	Connector CAN 15
1 x	Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x	EWC3 100 cm wing connector
2 x	Cabling for Fox MDM1 wings
1 x	Extension 2/3 lipos JST/C
1 x	Connector Sub-D 2+5 Female
1 x	Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	Male Prolonger TP 4/5S
1 x	Propeller balancer
2 x	Paramotor Trike XL
1 x	Servo Arm 25T M3 KAVAN 6.5 / 19.6 mm
1 x	Paramotor Kit Camo H1.5/ Ben Red
1 x	Truck-trailer for gliders 720 x 239 mm
2 x	Opale Rucksack
1 x	ASK 21 6.8m
1 x	Fox 4000 mm (Airwold)
1 x	X-RAY Micro QR (Elevator)
1 x	Q-12 2000 mm Electric
1 x	JETI handheld transmitter DS-14 II Blue Multimode
1 x	Transmitter JETI Duplex DC-24 EX Carbon Line DARK Red Multimode
1 x	Transmitter JETI Duplex DS-24 EX Multimode
1 x	Emisora JETI Duplex DS-16 II Carbon Line RED
1 x	300x4 mm M4 shaft ship
1 x	29,0 mm propeller (left propeller)
1 x	38 mm fenders (10 pcs)
1 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x	150 mm inflatable superlight deluxe wheel (2 pcs)
1 x	TURBINATOR 2 ORANGE/SILVER 1778 mm Combo
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	Conector MR-60 (pareja)
1 x	Cable coupler M2 (10 uds)
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	39,0 mm propeller (left propeller)
1 x	40,0 mm hydro-propeller (left hydropropeller)
1 x	JETI handheld transmitter DS-14 II Green Multimode
1 x	75 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	Receiver replacement antenna, approx. 15
3 x	ABS angle 10,0x10,0x1000 mm
1 x	90x60 mm standart servo cover
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	18 mm wing servo holder
1 x	Bidule 55 V3 2460 mm
2 x	ABS angle 5,0x5,0x1000 mm
1 x	DSM 10 Dual Switch Mixer
1 x	Battery RX JETI LiIon RB 5200 7.2v
1 x	DUPLEX 2.4EX Expander E4
1 x	Shaft for A60-L V4
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	Disipador para motor Hacker B 20 (or motors up to Ø20 mm)
1 x	Opto Gas Engine Kill Switch
1 x	MPS Gas-Cap-Powerswitch
1 x	wing/fuselage connector for 16 pines AWG 20-24
1 x	Adapter lead MPX/EC3
1 x	Short Switch On/Off micro
1 x	MPX-Dean "T" Adapter
1 x	DPSI magnetic switch actuator (housing)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	SLICK 360-B 104" (2640 mm)
1 x	Q-12 X-light 2000 mm Electric
1 x	UMX™ Whipit™ DLG BNF Basic (E-flite)
1 x	Emisora JETI Duplex DS-16 II SILVER Multimode
1 x	Transmitter JETI Duplex DC-16 II RED Carbon Line Mod.2
1 x	Transmitter JETI Duplex DS-12 SE Carbon RED
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	290 mm M4/4 mm Prop shaft
1 x	14 mm Portholes for screws (10 pcs)
2 x	290 mm M5 Prop shaft
1 x	12 mm dogdrive props
1 x	290 mm 8x4 M4 shaft ship
1 x	12 mm mast holder
1 x	Cierva C30 Elevator
1 x	ABS I Strip 10x5x1000 mm
1 x	Blade holder lower
1 x	Airtop balloon pneumatic wheels ø160 mm with bearing. 1 pair
1 x	57 mm micro-mini servo cover
1 x	Profile ABS half cane 6.0x1000 mm
1 x	13 mm wing servo holder
1 x	ABS "T" angle 6.0x6.0x1000 mm
1 x	LA500 housing-lower cyclic
1 x	ACTIVE ARF Electric 1.995 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	7 mm gas motor standoff
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	ABS Strip 1.5x2.0x1000 mm
1 x	50x45 mm micro-mini servo cover
1 x	Profile ABS triangular 4.0x1000 mm 90º
1 x	ABS angle 1.5x1.5x1000 mm
1 x	Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x	Aramid 50 daN 50 m

31,963.59EUR