25.00EUR

MicroMatch PowerBox
[POWER6800]


MicroMatch PowerBox
Product description

The PowerBox MicroMatch is the ideal solution for models where there is no space for a PowerBox, or where the PowerBox in use does not include the MicroMatch’s functions.
The MicroMatch provides a very simple method of fine-tuning the servo travels and centre positions of both outputs. Its main application is for systems where two servos operate a single control surface; the unit can match them electronically to run exactly in parallel. This prevents the servos counteracting each other, and allows the torque and speed of both servos to be exploited to the full. A further positive effect is a significant reduction in current drain and servo wear.

The MicroMatch includes a servo reverse function which changes the direction of rotation of the servos with a single click. This is ideal for elevator servos which are installed as a mirror-image pair, allowing them to be operated using just one channel. Further applications are twin rudders or steerable nosewheels. All adjustments can be carried out using the USB interface or a BlueCom adapter. The BlueCom option offers one very practical feature: it is possible to make direct adjustments at the servo output arm, and alter the settings conveniently using a mobile phone and a Bluetooth link! The MicroMatch includes an update facility, allowing for possible future expansions to the range of functions.

Features
Servo-match function on both outputs
Servo reverse, accurate adjustment of centre and end-points
Programmable using a telephone app (BlueCom) or a PC (USB)
Quick reverse function
16-bit processor for high-speed signal processing
4096-step resolution to suit the latest generation of servos
Interference suppression and signal amplifier function
Ultra-high current capacity: limited only by the plug and socket connection
Can be updated using BlueCom or the USB Interface Adapter

Technical Data
Operating voltage 4.0V - 9.0V
Current drain Power-on state 22mA
Maximum load current >10A
Signal input PWM
Channels 1
Programmable servo outputs 2
Servo signal resolution 4096
Signal frame rate 12ms, 15ms, 18ms, 21ms
Dimensions 33 x 10 x 5.5 mm
Weight 7.5g
Temperature range -30°C to +75°C



temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x USB Mini Camera endoscope
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
2 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Ball link M1.6 (6 uds)
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
2 x Long ball link M3 (6 uds)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x Long ball link M2 (6 uds)
1 x Gates hinge 30x16 mm (2 pcs)
2 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Socket head long ball link M3 (6 uds)
1 x Blue metalic ball link M2/2 azul (2 pcs)
2 x M2,5 5Diam short black ball link V2 (2 pcs)
2 x Large flex hinge (12 uds)
1 x Socket head long ball link M3 (2 uds)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x BALSA trip 3.0x5.0x1000 mm
1 x Pine wood slat 5.0x5.0x1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
1 x Beech dowels 2.0 x 1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
2 x BALSA triangular 10x10x1000 mm
1 x Walnut wood slat 1.5x1.5x1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Pine wood slat 10x10x1000 mm
2 x Pine wood slat 3.0x5.0x1000 mm
1 x Beech dowels 10 mm x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
2 x BALSA trip 4.0x4.0x1000 mm
2 x BALSA trip 10x10x1000 mm
1 x Mahogany wood slat 1.5x1.5x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x Walnut wood slat 3.0x3.0x1000 mm
1 x BALSA triangular 15x15x1000 mm
1 x BALSA leading edge 8x10x1000 mm
2 x Beech dowels 3.0 x 1000 mm
3 x Trailing edge BALSA 35x8x1000 mm
1 x Interface Jack Adapter IKARUS
1 x RF9 Flight Simulator with Spektrum Controller
1 x Slave-cable USB Easy Sim
1 x Interface Realflight Simulator
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Streamline Stainless Steel Tubing 10.5x5.7x1000 m
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x Locking cable tie 4.6x203 (uds)
1 x Tape GFK 25 mm
2 x Tester LiPo/LiIon/LiMn/LiFe
1 x Tester LiPo/LiIon/LiMn/LiFe
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Jet Afterburner Simulator NF-Jet3 RY
1 x Jet Afterburner Simulator NF-Jet2YY Set
1 x Propeller POWER-PROP 7x7
1 x JEEMO Kit ARF Basic (2 color) - XTRALIGHT
1 x RX external cable for estandar receivers
2 x M3/5 Diam metal short ball link V3 (2 pcs)
1 x 15 mm reinforced hinge
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Lipo SMART 5000 mAh 4s 14.8v IC5
1 x Battery RX JETI LiIon RB 3100 7.2v
1 x Ball link M3 (6 uds)
1 x 25 mm reinforced hinge
2 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Long ball link M1.6 (6 uds)
1 x Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x 800TVL CMOS camera for FPV
1 x XICOY X45 rail
1 x Indoor hinge with servo arm integraded
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x Micro flex hinge (12 uds)
2 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x Small pinned hinge (6 uds)
2 x Joint with bearing M3 22x5,5
1 x Jeemo Dolly
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x Beech dowels 4.0 x 1000 mm
1 x M2,5 5Diam black ball link V2 (2 pcs)
1 x Birch plywood plate 600x300x2.0 mm
1 x Liston HAYA 10 x 10 x 1000 mm
1 x Birch plywood plate 600x300x1.5 mm
1 x Joint with bearing M2 22x5,5
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Ball link M2,5 (10 pcs)
1 x M3 Maxi ball link (2 uds)
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Conector BEC female (10 pcs)
1 x Socket head ball link M3 (2 uds)
1 x Ball link M3 (10 pcs)
1 x Ball link M2 (10 pcs)
1 x Short ball link M3 (6 uds)
1 x BALSA trip 2.0x2.0x1000 mm
1 x M2,5 Diam metal ball link V3 (2 pcs)
1 x Tube Pitot to PIXHAWK
1 x Mahogany wood slat 2.0x2.0x1000 mm
1 x Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x Lite Plywood panel 600x300x3.0 mm
1 x EasyFLY Addon
1 x OLED-Display for PowerBox Mercury SRS
1 x PowerBox Battery 4000
1 x Extension for SensorSwitch 30cm
1 x PowerBox Competition
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x Power Box GPS Sensor III
4,312.74EUR
Manufacturers
Languages
Español English
Currencies