55.00EUR

PowerBox DigiSwitch V2 MPX/JR
[POWER6432]


Product description

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi- Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.
By using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!
The DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
CORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!


Features High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state 23 mA
Current drain Standby 4 μA
Maximum load current max. 10 A
Drop-out voltage 0.1 V
Output voltage 6.0 V/ 7.0 V/7.6 V stabilised or non-regulated
Dimensions 50 x 18 x 11 mm
Weight 15 g
Temperature range -30 °C to +75 °C


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x TMM 1210-3S heli
1 x TMM 2512-3S heli
1 x Swing 1000
1 x KOBY 40 LV Esc
1 x Mini-Pix Esc 15 Amp
2 x Esc KOSMIK 200+ HV
1 x Esc KOSMIK 160 HV
1 x KOLIBRI 140 LV Esc
2 x KOLIBRI 90 LV-I Esc
2 x KOBY 70 LV Esc
1 x Esc KOSMIK 210 HV-I COOL
1 x JIVE 100+LV Esc
2 x Glases Ace
1 x Glases Stratus
2 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
2 x Glases Nimbus "Black"
1 x Simulador RealFlight RF-9.5 S (sin emisora)
1 x Interface Realflight Simulator
1 x Digital Air Speed Sensor And Pitot Tube Set
1 x GameCommander USB Universal
1 x Slave-cable USB Easy Sim
1 x Interface Jack Adapter IKARUS
1 x Tube Pitot to PIXHAWK
1 x PIX Hawk with accesories
1 x ESC RAY G2 R-20B BEC
1 x Program Card G2 RAY
1 x ESC RAY G2 R-60SB SBEC
1 x Regulador Hobbywing Platinum PRO 130A-HV V4
1 x Cable with accesories
1 x PVC 0,35 qmm servos wire Graupner (100 m)
1 x 200m servo "Premium" wire (white/red/blue)
1 x Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x ABS tube 6.0x4.0x1000 mm
1 x LUCAS pilot ARTF
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x KOBY 90 LV Esc
2 x Cooler motor type 400
1 x JIVE 80+LV Esc
1 x Propeller MEJZLIK 22x10 Electric light (36 g)
1 x Propeller MEJZLIK 21x10 Electric light (36 g)
2 x ESC KOLIBRI 140 HV-I
1 x resin-hardener L-385 H-385 (625 g)
1 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
1 x Glases Nimbus
1 x ZENOAH ZG 62 SL
3 x CENTRAL PROPELLER BOLT FOR DLE85/111/120
1 x Motor Saito FG-73 R5, 72.7 cc
1 x Reed valve carrier, without reed valves DA-150L/170
1 x Stainless Steel Bend D 20x0,6mm
1 x Stainless steel silencer for DA 150/150L
1 x Escape DLE-60 Dcha
1 x Canister combo DLE 111 cc
1 x Prop washer for DA-85, DA-100, DA-100L, DA-120
2 x Canister combo DLE 170 cc
1 x Piston ring for DLE-30
2 x DLE 55-RA Muffler
1 x Air Intake manifold 90° - Large
1 x Reduction gear 2.8:1 for ZG 38 inline version
1 x Carburetor DLE 170M
1 x Prop washer DA-50R/60/70
1 x L ELBOW 90º ø 25 mm
1 x DLE 30 complete electronic ignition
1 x ZENOAH G270RC
1 x Carburator spacer block DA-50R
1 x ZENOAH ZG 26SLH Helicopter Engine
1 x Cylinder DA-50R, DA-100, DA-100L
1 x Pitts Muffler for D.A. 100
1 x ZG231cc SHL
1 x Rear crankcase DA-50R
1 x Stainless Steel Muffler D.A. 50/100/120
1 x V tail SILENT DREAM 2.200 mm (Elec or Glider)
1 x Motor mount VANQUIST 48" F3A
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x SE Ring 360 mm (2 pcs)
1 x SE Ring HACKER 300 mm (2 pcs)
1 x 20x200 mm battery rings
1 x Charger ISDT 608AC 200W
1 x Futaba male 40 cm extension
1 x Fully Threaded Steel Rod alumin 60 mm M3 (2 pcs) knurled
1 x Cockpit aluminium closing 4.7g
1 x Extension 100 cm (Futaba)
1 x Covered closure or fairings
1 x Crimping sleeves for cable 0.70 mm (10 pcs)
1 x Fully Threaded Steel Rod Duralumin 50 mm M3 (2 pcs)
1 x Extension silicon 35 cm male (Futaba)
1 x Fully Threaded Steel Rod Duralumin 130 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod alumin 70 mm M3 (2 pcs) knurled
1 x Fully Threaded Steel Rod Duralumin 40 mm M3 (2 pcs)
1 x Fully Threaded Steel Rod Duralumin 110 mm M3 (2 pcs)
1 x Extension 30 cm (Futaba)
2 x Sensor Ignition DLE 20/20RA/30/35RA/55/55RA
1 x 180° TUBE-ANGLE Ø 25 mm
1 x Captador OS GT 33 cc
1 x ESC 40A. Opto starter Kolm
1 x Low speed needle DA-50R/100I
1 x Piston ring for DLE-20 RA
1 x Cylynder DLE 20-RA
1 x ‎Reed valve for DA-60/70
1 x Giant Scale Muffler SLIMLINE D.A. 100 (2pcs)
1 x 90° TUBE-ANGLE Ø 25 mm
1 x Stainless Steel Bend D 28x0,6mm
1 x Motor Saito FG-60 R3, 60 cc
1 x 
1 x Motor Saito FG-36, 36 cc
1 x Piston ring for DA-50R and DA-100
1 x DLE 85 / DLE111 / DLE120 Prop Washer
1 x Ignition for DA-50-R, DA-60, DA-85
1 x Carburetor DLE 20
1 x O-Ring SAITO FG-90 R3
1 x Carburetor DLE 170
2 x Muffler DLE-120 Right
1 x Cylinder for DA-85/170 (1 piece)
1 x Steel conrod DA-50R and DA-60
2 x Carburetor DLE 30
1 x Engine Kolm BX-155-2 with starter
1 x Pitts Muffler for D.A. 120
1 x Ignition KOLM BX-155-2 Engine
1 x Big Crow DLE-170M
1 x 110 degree stainless steel bend D=18mm, widened to 20mm
1 x Escape DLE-60 Izda
1 x Escape O-Ring ZIMMERMANN FG-84/90 R3
2 x Canister combo DLE 55 cc
1 x Motor DLE 30 cc V2
1 x Motor Moki 180
1 x Motor DLE 55 RA
1 x Cylinder ZG 26SC/SLH
1 x Motor DLE 60 cc Twin
1 x Motor Mount for TITAN ZG38/38S/38SC, length 36 mm
1 x Drilling-template set for Moki engines Moki S150, S180, S215, S2
1 x Motor Moki S 400 cc 5 cylinders
1 x UHU hart 35 g
1 x Hardener Aero EPH 161 (250 g)
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Propeller 10x4,7 SlowFlyer
1 x Propeller MENZ-S 20x8
1 x FIALA Propeller 16x6
1 x Propeller MENZ-S 15x8 3 blades
1 x Propeller MENZ-S 20x9
1 x Reductora IPS 150 DX2BB-BXCS 7:1
1 x Cooler motor type 150
1 x Propeller 9x7 SlowFlyer
1 x Propeller 3x3
1 x Cooler motor type 280
1 x Propeller 9x4,7 SlowFlyer
1 x Reductora IPS 150 DX2BB-CXCS 8,6:1
1 x Retract undercarriage
1 x Foam wheel Ø 38 mm (2 pcs)
1 x Cooler motor type 300
1 x 76 mm light wheels (2 pcs)
1 x Propeller 8x4 Electric
1 x Reductora IPS dual-motor 10,7:1 with spinner
1 x Propeller 11x4,7 SlowFlyer
1 x FIALA Propeller 18x8
1 x Propeller MENZ-S 16x10
1 x Propeller MENZ-S 16x8
1 x Propeller MENZ-S 16x8 3-Blades
1 x Propeller MENZ-S 20x12
1 x Propeller MENZ-S 16x6
1 x Propeller MENZ-S 15x10
1 x FIALA Propeller 23x10
1 x Propeller MENZ-S 21x10 3-Blades
1 x FIALA Propeller 24x8
1 x Propeller MENZ-S 15x8
1 x FIALA Propeller 26x10
1 x Propeller MENZ-S 18x10
1 x FIALA Propeller 23x8
1 x Receiver Crystal 35 Mc/s Ch 62
1 x Propeller MENZ-S 15x12
1 x Propeller MENZ-S 17x8
1 x Transmitter Crystal 35 Mc/s Ch 62
1 x Program Card KAVAN ES
1 x ESC KAVAN R-80SB SBEC 80A
1 x Truck-trailer for gliders 720 x 239 mm
1 x Exhaust gasket Valach 85
1 x Cylinder head, left for VM 170/210
1 x VALACH VM 85 B2-FS
1 x Avanti S Jet , Carrying bags (SebArt)
1 x Avanti XS Jet , Carrying bags (SebArt)
1 x Avanti S Jet , Exhaust for JetCat P-140 (SebArt)
1 x Muffler DLE-120 Left
1 x BLANIK 50 V2 Silver/Blue (SebArt)
1 x 45 mm gas motor standoff
1 x Gasket set DLE-55
1 x Hopper UAT Sebar 400 ml
2 x Reed valve petal for DLE 170M
1 x Brake for 140 mm wheels
1 x Deposito DUBRO 3000cc-100oz
1 x Motor DLE 111 cc
1 x PROPELLER SCREW SET FOR DLE120 (6PCS)
1 x Motor DLE 170 cc Twin
1 x Ball bearing 6203 DLE
1 x Gasket, cylinder base for motor DA 50
2 x 25 mm gas motor standoff
1 x Exhaust pipe BX 155 Right
1 x Hardener P-25, canister 2.5Kg
1 x Regulador Hobbywing Platinum 260A HV SBEC V5
1 x resin-hardener L-385 H-385 (1250 g)
1 x Mould Resin P + Hardener EPH 161-P, kit/ 585 g
1 x Epoxy L 40 min. 10 kg (Resin)
1 x Epoxy Resin L + Hardener L (40 min) 3.5 Kg (2.5 kg Resin L + 1 k
1 x Epoxy 30 min. 200g
1 x Epoxy Resin L + Hardener LT kit/ 3125g
1 x Epoxy 40 min (Resin). 5 Kg
1 x Epoxy Resin HT 2 + Hardener HT 2, kit/ 296 g
1 x Propeller balancer
1 x Epoxy 40 min (Hardener). 10Kg
1 x Propeller balancer
1 x Glases Flitemaster
1 x Charger Li Polymer Multi-Cell Multi-Rate Charger (MCMR)
1 x Selfstart electronic switch
1 x Hopper UAT Sebar 600 ml
1 x 50 mm gas motor standoff
1 x GASKET SET FOR DLE40
1 x Avanti S Jet , Vectorial Exhaust for JetCat P-180
1 x DLE Ignition 111/120/170
1 x Avanti S, Cockpit sunCover (SebART)
1 x DLE 55 RA pipe plug
1 x BAE HAWK Mini 1.29m MILITARY ARROW ARF +elec.L.Gear + 3 Microser
42,145.60EUR
Manufacturers
Languages
Español English
Currencies