55.00EUR

PowerBox DigiSwitch V2 MPX/JR
[POWER6432]


Product description

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi- Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.
By using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!
The DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
CORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!


Features High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state 23 mA
Current drain Standby 4 μA
Maximum load current max. 10 A
Drop-out voltage 0.1 V
Output voltage 6.0 V/ 7.0 V/7.6 V stabilised or non-regulated
Dimensions 50 x 18 x 11 mm
Weight 15 g
Temperature range -30 °C to +75 °C


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x LH long black aluminium horn L31xH30 (2pcs)
1 x Horn 13,5x16 mm (2 pcs)
2 x Horn 6/35 with M3 Bearing
1 x ABS tube 12.0x10.0x1000 mm
2 x ABS tube 5.0x4.0x1000 mm
1 x ABS tube 4.0x3.0x1000 mm
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x Threaded coupler ALU M3 Ø 5 (2 uds)
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x ABS tube 3.0x2.0x1000 mm
2 x Brass control horn M4 short for wire (4 pcs)
1 x ABS tube 6.0x4.0x1000 mm
1 x ABS tube 7.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
2 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 9.0x7.0x1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Small aluminium horn gold (2pcs)
2 x ABS tube 20.0x18.0x1000 mm
1 x Steel tube (L 1000 mm Ø7 mm, Ø6,7 mm)
1 x ABS tube 5.0x3.0x1000 mm
2 x ABS tube 16.0x14.0x1000 mm
1 x ABS tube 5.0x4.0x156 mm
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x ABS tube 6.0x5.0x1000 mm
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Horn with ball 40x30
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x ABS tube 3.0x2.0x330 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Brass control horn M4 short for wire (10pcs)
1 x ABS tube 8.0x6.0x1000 mm
1 x Cabel charger transmitter GRAUPNER
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Dean "T" - Futaba Adapter
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Circlick securite
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 2.5 mmx1000 mm
1 x Carbon fiber rod 2.0 mmx1000 mm
2 x Carbon wing joinner 13,4 mm Ø 0,48 mm
2 x Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon fiber flat 1000x3.0x1.0 mm
2 x Carbon fiber rod 14 mmx1000 mm
1 x Jeti Black cap
1 x Carbon fiber flat 1000x6.0x0.8 mm
2 x Big-Malibu XL Roof box with surfboard rack GREY
1 x 800TVL CMOS camera for FPV
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Stickers-digit for marking
1 x BALSA trip 5.0x5.0x1000 mm
1 x eFuel 30A Power Supply
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x PowerBox Smokepump
1 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø12 mm, Ø8 mm)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø14 mm)
1 x Suction funnel for carburetor WALBRO 20-80cc (blue)
1 x JM electric Pump
2 x Suction funnel for carburetor 90D-L (red)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø16 mm)
1 x Sparkplug 1/4-32
2 x Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x DA 85 / DA 100 / DA 100 L carburetor
1 x Bujia OS G5 gasolina
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x ABS tube 10.0x8.0x1000 mm
2 x TA1200 Charger Compatible with Smart and Standard LiPo Batteries
1 x Suction funnel for carburetor DA70- MVVW 190cc (red)
1 x Carbon tube (L 1000 mm, Ø4 mm, Ø2,5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø22 mm, Ø20 mm)
1 x Carbon tube (L 1000 mm, Ø10 mm, Ø8 mm)
1 x EME 55 cc carburetor WALBRO
2 x ABS tube 14.0x10.0x1000 mm
1 x Sparkplug 1/4-32 Glow
2 x Extension Arm for Carburetor (red)
1 x Carbon tube (L 1000 mm, Ø16 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø18 mm, Ø15 mm)
1 x Carbon tube (L 2000 mm, Ø12 mm, Ø10 mm)
1 x Gasket electric Fuel Pump
1 x PowerFuel RX V2 Fuel Pump
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Horn mando small (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Propadapter for motor A50
2 x 6 mm red aluminium threaded horn with patella
1 x Servo mounting frame SV-1260MG
1 x Servo SAVOX SW-1250 MG digi
2 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x Extra-long adjustable aluminium control horn 2,8x34
1 x Horn mando long (2 pcs)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Female connector for 16 pines AWG
1 x Extension 5 lipos JST - JST/C
1 x EWC3 40 cm wing connector
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Female connector for 20 pines AWG
1 x Extension 6 lipos XH > EH
1 x Male connector for 20 pines AWG
1 x Male connector for 6 pines AWG
1 x Extension 5 lipos JST/C - JST
1 x FX three-position switched channel, long
1 x Lense for Spotlights, 20mm
1 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Hovercraft sailcloth
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 25 mm reinforced hinge
1 x Reflector 18 mm (2 pcs)
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 0.8 mmx1000 mm
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Servo AN-20 MGBBA
1 x Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x ALU servo arm 3 mm shaft
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x SAVOX SH 0254 servo
2 x Servo SAVOX SV-0236 MG HV
1 x Servo HITEC HS-125 MG
1 x Servo lock HS-80/81/82/85 (2 pcs)
1 x Servoarm Aluminium SH-82
1 x Xoar Electric Beechwood Prop 16x7
1 x Propeller APC 10x4.7 SF Pusher
1 x Xoar Electric Beechwood Prop 22x10
1 x Xoar Electric Beechwood Prop 21x10
1 x Xoar Electric Beechwood Prop 15x8
1 x Xoar Electric Beechwood Prop 24x8
1 x Xoar Electric Beechwood Prop 20x10
1 x Propeller APC 11x8.5 Electric
1 x Propeller APC 12x6 Electric Pusher
1 x Propeller APC 11x7 SF
1 x Propeller APC 12x3.8 SF
1 x Propeller APC 12x10 Electric
1 x Propeller APC 11x4.5 Electric Pusher
1 x Propeller APC 14x10 Electric
1 x Propeller APC 12x6 SF
1 x Propeller APC 10x5 Electric
1 x DLE 55 carburetor
1 x Walbro carburetor for MVVS 26/30/35/40 cc
1 x Tren de cola carbono 50-70cc
1 x Tailwheel for 20/60 size
1 x Tailwheel for 40/90 size
1 x Suction funnel for carburetor WALBRO 20-80cc (red)
1 x EXTRA 300 78" V3 Yellow/Red/Blue
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Carbon tube (L 1000 mm, Ø6 mm, Ø4 mm)
1 x Smoke pump RCEXL
1 x Carbon tube 3K-PW (L 1000 mm, Ø40 mm, Ø36 mm)
1 x 2,3 mm Prop Adapter M5
1 x Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x ABS Strip 1.0x4.0x1000 mm
2 x Small adjustable control horn with bearing
1 x SAVOX SH 1250 MG servo digi
1 x SAVOX SH 1290 MG servo digi
1 x Servo SAVOX SA-1256 TG
1 x EXTRA NG 85" 2159mm red/white
1 x Variable Flow Smoke Pump System
1 x Charger GensAce IMARS Dual Channel AC200W/DC300Wx2
1 x Carbon tube 3k-LW (L 2000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube (L 1000 mm, Ø7 mm, Ø5 mm)
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø20 mm, Ø18 mm)
1 x Carbon tube (L 1000 mm, Ø5 mm, Ø3 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø12 mm, Ø10 mm)
1 x 4 mm Prop Adapter M6
1 x Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x 12 mm dogdrive props
1 x 2 mm Prop Adapter M5
1 x Actro 32-3 Heli MAX 5mm
2 x Medium extra-strong control horn with bearing 2,8x24
1 x ABS angle 6,0x6,0x1000 mm
1 x Rudder forward 80x28 "type Kato"
1 x ABS Strip 1.5x8.0x1000 mm
1 x Indoor hinge with servo arm integraded
1 x ABS tube 2.0x1.0x1000 mm
1 x ABS I Strip 10x5x1000 mm
1 x ‎Reed valve for DA-60/70
1 x ABS Strip 1.5x2.0x1000 mm
1 x Horn F3A de Titanium 16 mm (2 units)
1 x Horn for flap control (1 pcs)
1 x Small control horn with bearing (2 pcs)
1 x Piston ring for ZG 20 and G240RC
1 x Horns indoor
1 x ABS tube 18.0x16.0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Long horn 50x26
1 x 6 mm aluminium horn with patella
1 x Piston ring for ZG 26SC/EI, ZG 26SCM ZG 26SLH and Zenoah G260RC/
1 x Horn 6/27 with M3 Bearing
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Small aluminium horn blue (2pcs)
1 x 6 mm M3 variable horn
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Long adjustable aluminium control horn with bearing 2,8x15
1 x Three-position switched channel, short
1 x Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x Propeller APC 10x6 Electric
1 x Arnes cruzado Confort de Luxe PROFI
1 x Propeller APC 10x6 Glow/Gas
1 x 2 piece mounting frame
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x 8Wx2 Gears-Spotlight, UltraPower, 20mm White
1 x 3-blades 21x12carbon prop Super Silence
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x PWC4 wing/fuselage connector for 4 servos
1 x JETImodel Addcap 1640
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x Carbon plate 350x150x1.0 mm
1 x Propeller APC 10x7 Glow/Gas
1 x 
1 x Propeller APC 10x4.7 SF
1 x Propeller APC 12x10 Glow/Gas
1 x Propeller APC 10x10 Electric
1 x wing/fuselage connector for 6 pines AWG 20-24 (without pines)
1 x Propeller APC 10x5.5 MR Electric multirrotor
1 x Propeller APC 11x5 Glow/Gas
1 x Mobile Terminal
1 x 2 piece mounting frame Battery 3200 / 4000
11,483.53EUR
Manufacturers
Languages
Español English
Currencies