439.01EUR

PowerBox Competition SR2
[POWER4450]


Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x 2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x 
2 x Ant. Cable R606/17/08/14FS L:1500mm
1 x Receptor FUTABA R3106GF T-FHSS
1 x Motor rotor LA-500
1 x TrainerCord (master-learner)
1 x PowerBox MagSensor black connector SRS/Champion
1 x LA500 front gear holder
1 x Circlick securite
1 x CC 02
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Straightened threaded rod M2-1m
1 x Baal link 4/14/4 (5 pcs)
1 x PowerBox Champion SRS
1 x PowerBox iGyro SAT
1 x JETImodel SINGLE BEC
1 x USB HLS prog. interface
1 x LA500 cyclic central part
1 x Straightened rod Ø 4.0 mm x 1000 mm
1 x PowerBox MicroSwitch
1 x PowerBox iGyro SRS + GPS Modul
1 x Strip 3,5x1,75x330 mm
1 x Horizontal cockpit anchor "tipe F3A" (2 pcs)
1 x Brass control horn M3 short for wire (2 pcs)
1 x Round Rod 1,0x1000 mm
1 x Steering arm 12 mm Ø 4 mm
1 x Cockpit plastic closing
1 x Cierre cabina aluminio Ø4, I=10 mm
1 x Blade Holder Full (4 blades)
1 x Tail tube RAINBOW
1 x Aluminium alloy coupler for carbon tube 6/M4
1 x Vertical cockpit anchor "tipe F3A" (2 pcs)
1 x 6 mm red aluminium threaded horn with patella
1 x VTX 477 Carbon Rotorblade
1 x Receiver Futaba R1008SB 8-channel 2.4 GHz FHSS
1 x Receptor GRAUPNER GR-24 HoTT
1 x Futaba R3008SB T-FHSS 2.4GHz S.Bus2 8/32 Channel Receiver
1 x PowerBox Evo
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x PowerBox 12
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x Straightened rod Ø 3.0 mm x 1000 mm
1 x PowerBox iGyro 3xtra
1 x POWERBOX Magic Jeti Switch Royal SRS, Champion SRS
1 x PowerBox MAG Sensor
1 x TP/TopFuel - XH 2/3S Adapter
1 x Straightened rod Ø 4.5 mm x 1000 mm
1 x Bec MR UBEC 5A (5v/6v/7v)
1 x Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x Adapter lead MPX/EC3
1 x Charging Extension 50cm for 2 Battery
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Stainless steel cable Ø 0.5 mm (20 m)
1 x ABS Strip 1.5x8.0x1000 mm
1 x Covered closure or fairings
1 x Crimping sleeves for cable 0.85 mm (10 pcs)
1 x Canopy Latch
1 x Small aluminium horn blue (2pcs)
1 x 6 mm aluminium horn with patella
1 x Strip 1,5x1,5x330 mm
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Electric spoiler 250 mm (2 pcs)
1 x SlowFlyer control horn (3 pcs)
1 x Stainless steel cable Ø 1.3 mm (10 m)
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Round Rod 2,5x1000 mm
1 x Stainless steel cable Ø 0.52 mm - 15 kp (10 m)
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Cierre cabina aluminio Ø5, I=16 mm
1 x Horn 20x28,5 mm (2 pcs)
1 x Brass control horn M4 short for wire (10pcs)
1 x Round Rod 4,0x1000 mm
1 x ABS I Strip 20x10x1000 mm
1 x Stainless steel cable Ø 0.88 mm - 60 kp (10 m)
1 x Receiver FUTABA R7108SB FASSTest/FASST
1 x Receptor FUTABA R7006SB FASSTest/FASST
1 x R617 FS 2,4 GHz receiver
1 x Antena FUTABA R7108/7014/7114SB (1 pc)
1 x 
2 x R6106 HF 2,4 GHz receiver
1 x Antena FUTABA RX 606/607/6014/2006/2008/3008/7006/7008, 2 pcs.
1 x Receiver R7008SB FASSTest
1 x Receiver GRAUPNER GR-12 HoTT
1 x Receptor FUTABA R7208SB FASSTest SBus2
1 x Antena FUTABA receptor Standard 2.4 GHz ( 200 mm aprox.)
1 x Futaba R3006SB T-FHSS 2.4GHz
1 x Receptor FUTABA R7003SB FASST
1 x Servo NARO Max Std
1 x Camera Sony 4140+673 CCD with Built-in 200mw TX + antenna
1 x Straightened rod Ø 2.5 mm x 1000 mm
1 x PowerBox Competition SR2
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Pilot LA 500
1 x LA500 freewheel bearing
1 x LA500 housing-upper cyclic
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x Brass rod Ø 1.5 mm x 1000 mm
1 x OLED-Display for PowerBox Mercury SRS
1 x LA500 tail empennage
1 x PowerBox PowerExpander SRS
1 x TP/TopFuel - JST-EH 4/5S Adapter
1 x PowerBox Cockpit SRS (incl. SensorSwitch)
1 x Aluminium rod Ø 4.0 mm x 3000 mm
1 x LA500 pre-rotation gear
1 x Battery charging cable XT60
1 x Straightened rod Ø 1.0 mm x 1000 mm
1 x Brass rod Ø 0.5 mm x 1000 mm
1 x Straightened rod Ø 2.0 mm x 1000 mm
1 x Straightened rod Ø 6.0 mm x 1000 mm
1 x POWERBOX Magic Jeti Switch
1 x Aluminum Bayonet / strongal D35 mm / 1 m
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
1 x Red copper lacquer wire Ø0,2 mm (5 m)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x MicroMatch PowerBox
1 x Extension for LC-Display 50cm
1 x LA500 pre-rotation gear hub
1 x Straightened rod Ø 1.2 mm x 1500 mm
1 x LA500 ciclic lever
1 x PowerBox DigiSwitch V2 JR/JR
1 x LA500 housing-lower cyclic
1 x PowerBox Competition
1 x Mobile Terminal
1 x Straightened rod Ø 1.5 mm x 1500 mm
1 x 3 LiPo XH>EH adapter
1 x Cabel charger transmitter GRAUPNER
1 x Straightened rod Ø 7.0 mm x 1000 mm
1 x Brass rod Ø 0.8 mm x 1000 mm
1 x BlueCom™ Adapter (Android / WP)
1 x 2 LiPo XH>EH adapter
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Safetyclip MPX (6 pcs)
1 x PowerBox DigiSwitch V2 MPX/JR
1 x PowerBox Battery 4000
1 x LA500 rotor head core
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Power Box GPS Sensor III
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x CC 03
1 x BlueCom™ Adapter (iOS)
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Futaba External voltage input cable Futaba CA-RVIN-700
1 x 800TVL CMOS camera for FPV
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x APM2.6 Power module with 5.3V DC BEC
1 x CC 01
1 x Piñon motor rotor LA-500
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x PowerBox MagSensor red connector
1 x Dean "T" - Futaba Adapter
1 x Aluminium tube with fibreglass case ø35x1.5mm, 1m
7,291.34EUR
Manufacturers
Languages
Español English
Currencies