319.00EUR

PowerBox Competition
[POWER4430]


PowerBox Competition
Features Servo-Match function: servo centre, end-points and reverse for 4 channels and 8 servos Graphic OLED screen with 128 x 64 pixels Extremely user-friendly menu-based programming using the SensorSwitch 12 channels Signal amplification and interference suppression for all 18 outputs Variable frame rate, range 9ms – 21ms 16-bit processor for fast, high-resolution signal processing double-regulated output voltages for receivers and servos regulated voltage with selection facility, 5.9V or 7.4V Connection facilities for Spektrum, HoTT and Multiplex MSB downlink bus systems Direct transmission of battery voltage and capacity to the transmitter Separate voltage and capacity display for each battery Minimum value memory alerts the user to voltage collapses Large-area heat-sinks for high regulator performance Regulator monitoring, regulator error indicator Support for three battery types: LiPo, NiMH / NiCd, LiFePo Suppression of any servo feedback currents which may occur Updateable with PowerBox Systems USB Interface connectors Technical Data Operating voltage 4.0V - 9.0V Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH Current drain Power-on state 130mA Current drain Standby 15µA Maximum load current Peak 2x20A Drop-out voltage 0.3V Output voltage 5.9V and/or 7.4V regulated Signal input PWM Channels 12 Servo sockets 21 Programmable servo outputs 4 channels, 8 servos Servo signal resolution 0.5µs Signal frame rate 9ms, 12ms, 15ms, 18ms, 21ms Screen OLED 128 x 64 pixels, graphic Supported telemetry systems Spektrum, HoTT, M-Link Dimensions 110 x 72 x 24 mm Weight 115g Weight Sensor Switch 15g Temperature range -30°C to +75°C


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x SIMtransmitter 6 Mode 2
1 x Horn 5/15 with M2 Bearing
1 x Cable control set
1 x Cable with accesories
2 x Horn 6/27 with M3 Bearing
1 x Horn with ball 55x40
2 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x 20 mm carbon horn
1 x LH long aluminium horn L31xH30 (2pcs)
2 x LH long black aluminium horn L31xH30 (2pcs)
1 x 6 mm blue aluminium threaded horn with patella
1 x Horn 6/35 with M3 Bearing
1 x Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x Horn for flap control (1 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
2 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x ARAMID honeycomb 1300x2600x2 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
2 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
2 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
2 x Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fiber flat 1000x3.0x1.0 mm
1 x Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
1 x Carbon fiber rod 12 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 7.0 mmx1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Carbon fiber rod 3.0 mm x 1000 mm
1 x Carbon fiber rod 6.0 mmx1000 mm
1 x Carbon fiber flat 1000x3.0x0.5 mm
2 x Carbon fiber rod 20 mmx1000 mm
1 x Carbon fiber rod 1.5 mm x 2000 mm
1 x Carbon fiber rod 1.0 mm x 1000 mm
1 x Carbon fiber rod 1.5 mm x 1000 mm
1 x Carbon fiber rod 4.0 mmx1000 mm
1 x Carbon fiber rod 5.0 mmx1000 mm
1 x Long ball link M3 (6 uds)
1 x M3 Maxi ball link (2 uds)
1 x M2 5Diam short black ball link V2 (2 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Brass hexagonal rod Ø 4 mm x 1000 mm
1 x ABS "T" angle 6.0x6.0x1000 mm
1 x Hovercraft sailcloth
1 x Oracover light Grey 2m
1 x RH long aluminium horn (2pcs)
2 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x Brass control horn M4 short for wire (10pcs)
1 x Threaded coupler ALU Left M2,5 Ø 3 (2 uds)
1 x Horn 20x28,5 mm (2 pcs)
1 x Small aluminium horn blue (2pcs)
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Horn 6/20 with M3 Bearing
1 x Brass control horn M3 short for wire (2 pcs)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x 6 mm M3 variable horn
1 x Horn 5/20 with M2 Bearing
1 x Rudder forward 90x28 "type Kato"
1 x Horn with ball 40x30
1 x 6 mm red aluminium threaded horn with patella
1 x Aro pasacable Ø25 mm (4 pcs)
1 x PowerBox Battery 4000
1 x Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 6 mm
1 x 6 mm aluminium horn with patella
1 x Rudder forward 80x28 "type Kato"
1 x Small adjustable aluminium control horn with bearing 2,8x15
1 x Tail support (2 pcs)
1 x Fuselage Autogyro RAINBOW
1 x Head upper part
1 x Head lower part
1 x 4 blades set
1 x Copier 2x20 cm pcs
1 x PROXXON - SILICON CARBIDE BELTS FOR BSL 220/E
1 x Disposable Injector Bags (30x16cm) 100 pcs
1 x 1,5x50 mm allen screwdriver
1 x Vacuum pump P1-N
1 x Ball Link Plier
1 x Optical RPM Sensor
1 x Starter 12v (Max 90 and 15ccm)
1 x Starter EM Gear Power 250
1 x PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x Z Bender - S Type Tool
1 x Balsa panel 3.0x100x1000 mm
1 x A/C quality beech plywood 600x300x0.8 mm
1 x A/C quality beech plywood 600x300x5.0 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Balsa panel 1.5x100x1000 mm
1 x Pulley brass 5/1,5 (2 pcs)
1 x Porta Kwik link M4 3 mm (2 pcs)
1 x Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x Pulley brass 10/2 (2 pcs)
1 x Ø 2,5 mm pin for Kwik link MPJ2170/2173 (6 pcs)
1 x Balls 4 mm
1 x Blade Holder (3 blades)
1 x Motor wall
1 x Blade holder center GFK 0,5 mm
1 x Blade Holder Full (4 blades)
1 x Baering 3x8x4
1 x Peel ply 95 g/m² (plain weave) 20 mm x 100 m
1 x Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Carbon plate 500x400x2.0 mm ISOTECH
1 x Peel ply 64 g/m² (plain weave) 150 cm x 10m
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x Carbon plate 550x350x1.5 mm ECOTECH
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Carbon plate 550x350x2.5 mm ECOTECH
1 x PVC grid diagonal 290x185x0.32 mm
1 x Chopped glass fibre strands 3 mm
1 x GPS Expander Module
1 x Extension for LC-Display 50cm
1 x PowerBox iGyro 3xtra
1 x Propeller balancer
1 x Landing gear axle 4x21 4 mm (2 uds)
7,116.86EUR
Manufacturers
Languages
Español English
Currencies