55.00EUR

PowerBox DigiSwitch V2 MPX/JR
[POWER6432]


Product description

The PowerBox DigiSwitch V2 is the second generation of the PowerBox Digi- Switch, which is well-known throughout the world. For almost fifteen years the PowerBox DigiSwitch has represented the standard for small to medium-sized models thanks to its compact format and versatility.
By using the latest components we have been able to reduce the size of the Digi-Switch V2 by about 20 %.
The introduction of a top-quality aluminium case, machined and anodised, has brought a substantial increase in the unit’s cooling efficiency, with the result that the maximum continuous current capacity of the PowerBox DigiSwitch V2 is around 20 % higher. In fact, the peak load capacity is twice as high: the DigiSwitch V2 can handle more than 10 A for several seconds!
The DigiSwitch V2 offers four user-selectable output voltages: for normal servos it can be set to a regulated 6.0 V, regulated voltages of 7.0 V and 7.6 V are available for HV servos, as is an option for non-regulated voltage.
Power to the unit can be drawn from four different battery types: LiPo, LiIon, LiFePo, NiMH. Ultra-bright RGB LEDs are fitted to indicate battery voltage; they light up in various colours to display the charge status of the batteries.
CORE users also benefit from one special additional feature: the battery voltage and regulator voltage can be displayed directly at the transmitter via telemetry!


Features High-performance electronic switch
Ultra-light unit, compact format
Regulated output voltage
User-selectable output voltage: 6.0 V/7.0 V/7.6 V or non regulated
RGB LED voltage indicator for the battery
Telemetry support for CORE systems
Supports 4 different battery types: 2s LiPo, 2s LiIon, 2s LiFePo and 5s NiMH
Regulator monitoring
Suppression of servo feedback currents

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2s LiPo, 2s LiIon, 2s LiFePo, 5s NiMH
Current drain Power-on state 23 mA
Current drain Standby 4 μA
Maximum load current max. 10 A
Drop-out voltage 0.1 V
Output voltage 6.0 V/ 7.0 V/7.6 V stabilised or non-regulated
Dimensions 50 x 18 x 11 mm
Weight 15 g
Temperature range -30 °C to +75 °C


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x APM2.6 Power module with 5.3V DC BEC
1 x Balanceradapter JST-XH (Heli 47G) 2-6 c.
2 x Double conector with JR adapter and 200 mm extension
1 x BEC 3A FOXY
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x "Y" charging 4mm wire (2 IN-1 OUT).
1 x Copper lacquer wire Ø0,2 mm (5 m)
1 x UBEC 6A KAVAN
2 x Connector Sub-D 2+5 Female
2 x 30 cm BEC cable (female)
1 x Dean "T" - Futaba Adapter
2 x Connector Sub-D 2+5 Male
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
2 x Cabling for Fox MDM1 wings
1 x CC 02
1 x CC 03
1 x CC 05
1 x CM-3
1 x Connector CAN 15
1 x Balance "Y" Wire 6S, 2x JST-XH / 1x JST-EH
1 x 5 LiPo XH>EH adapter
1 x Circlick securite
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
2 x 4 LiPo XH>EH adapter
1 x CellPRO 4S Adaptader (GP/KO up to 4S)
1 x Cabel charger transmitter GRAUPNER
1 x 3 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x 30 cm BEC cable (male)
1 x 2 LiPo XH>EH adapter
1 x Cabel charger battery transmiter Futaba 2x0,5 qmm (50 cm)
1 x Stickers-digit for marking
1 x FX three-position switched channel, long
1 x Micro Switch button
2 x Three-position switched channel, short
1 x Female connector JST SH 1.0mm with 10 cm wire
1 x wing/fuselage connector for 12 pines AWG 20-24
1 x EWC3 40 cm wing connector
1 x Female connector for 12 pines AWG
1 x EWC6 40 cm wing connector
1 x Hacker X-Pro USB interface V2
1 x Female connector for 20 pines AWG
1 x SPARK Switch 12v
1 x JETImodel Addcap 1640
1 x Male connector for 10 pines AWG
1 x EWC3 100 cm wing connector
1 x Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x Threaded coupler ALU M3 Ø 4 (2 uds)
1 x Horn 5/15 with M2 Bearing
2 x Horn 5/20 with M2 Bearing
2 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x LH long black aluminium horn L31xH30 (2pcs)
2 x Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x Aluminum Bayonet / strongal D25 mm / 1 m
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x 6 mm red aluminium threaded horn with patella
1 x Cable control set
1 x Horn 13,5x16 mm (2 pcs)
2 x Brass control horn M4 short for wire (10pcs)
1 x Motor DLE 200cc Std
1 x Extension 6 lipos XH > EH
1 x Opto Gas Engine Kill Switch
1 x Extension 5 lipos JST/C
1 x Electronic switch JETI SP06 Opto
1 x PowerBox SparkSwitch RS
1 x SPS 70V 140/280 A
1 x Magnetic Interruptor MULTIPLEX
1 x SWTU2 switch
1 x Electronic switch JETI SP6 0-15v/6A
1 x Extension 2/3 lipos JST - JST/C
2 x SBEC Jeti
1 x MAX BEC
1 x Servo slow down unit (0,7-14,7 sec )
1 x Opto Gas Engine Kill Switch
1 x SBEC 40
1 x PSC 5
1 x Male prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x Silent-blocks DLE 170M
1 x Female prolonguer XH 30 cm 6 cell cable of silicone 0,25 mm
1 x MAX BEC 2
1 x Male/Female prolonguer for Balancer Thunder Power 6S
2 x PSC 6
1 x SPS 70V 100/200 A
1 x Male Prolonger TP 4/5S
2 x Small Crow DLE-170M
1 x Extension 5 lipos JST - JST/C
1 x Silicone red 0,25 mm² wire (25 m)
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Anodized aluminium servo M4x5/8 screw (4 blue pcs)
1 x Circlick securite
1 x Smoke set "Glider"
2 x 2 mm male connector (2 pcs) with safety connector
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x DPS Switch JR/JR
1 x ABS tube 12.0x10.0x1000 mm
1 x Carbon fiber rod 16 mm x 1000 mm
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Actuador lineal HLS12-100210-7.4v
1 x Motor DLE 430 cc - Paramotors
1 x DPSI magnetic switch actuator (housing)
1 x SBEC 30 D
1 x Horn mando small (2 pcs)
1 x Small aluminium horn red (2pcs)
1 x Extra long horn 60x30
1 x Threaded coupler ALU M3 Ø 6 (2 uds)
1 x LH long aluminium horn L31xH30 (2pcs)
1 x Sistema LDS - Ø12 mm servos Ø 6/25 spline 60º (Futaba) pitch 7 m
1 x Rudder forward 80x28 "type Kato"
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x Horn with ball 40x30
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Wing-connector: Glass / Carbon tube (26.5/25 x 25/23) x 1000 mm
1 x 1,5x50 mm allen screwdriver
1 x Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x 3,0x60 mm allen screwdriver
1 x 5 mm M2 variable inclined horn
1 x Horn 6/20 with M3 Bearing
1 x 1,2x1000 mm 2:1 black termoretract tube
1 x Flybar support metal LAMA
1 x Horn 6/27 with M3 Bearing
1 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x Brass control horn M4 short for wire (4 pcs)
1 x Shaft sleeve LAMA
1 x TMM 1210-3S heli
1 x PWC6 PowerWingConnector for 6 servos with fuselage socket
1 x USB Interface REVOLECTRIX for CellPRO 10s
1 x Short Switch On/Off micro
1 x TMM 2512-3S heli
1 x Mini-Pix Esc 15 Amp
1 x PWC4 wing/fuselage connector for 4 servos
1 x Optotronix X-Carrier
1 x GPS Expander Module
1 x DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x DPSI LR-S (with push buttons)
1 x Red copper lacquer wire Ø0,2 mm (5 m)
12,314.38EUR
Manufacturers
Languages
Español English
Currencies