Top » Catalog » Hardware » Power supply system/Data Recordi » PowerBoxSystems » POWER4450

439.01EUR

PowerBox Competition SR2
[POWER4450]

Features

22 channels
High-performance battery backer with high continuous load capacity
2.4” TFT screen, legible in sunlight
Bi-lingual menu system
Consistent duplication of all power electronics
Redundant electronic switch
Servo matching for all 22 outputs
Auto matching function
Two independent door sequencers with Setup Assistant
The latest integrated iGyro technology, using the iGyroSAT as gyro sensor
Twelve independent gyro outputs for: 4x aileron, 4x elevator, 4x rudder
Individual gain control for all twelve gyro outputs
Special regulatory algorithm for fixed-wing models
System detects all transmitter mixers
Four selectable output voltages: 6.0 V, 7.4 V, 7.8 V or unregulated
Graphic menu diagrams ensure ultra-simple programming
Fast basic setup procedure using the sophisticated Assistant
Optional GPS III for speed-dependent gyro compensation
Telemetry data for PowerBox P²BUS, Futaba S.BUS2, Jeti Ex-BUS, Spektrum SRXL2, Multiplex M-Link and Graupner HoTT
Transmission of battery, receiver and GPS* data
Virtually all features can be controlled from PowerBox and Jeti transmitters
Selectable servo frame rate: 10ms, 12ms, 14ms, 16ms, 18ms
Servo feedback current suppression
Latest 32-bit micro-processor for precise, high-speed signal processing
High-performance machined heat-sink for optimised heat diffusion
Machined, anodised aluminium switch and screen case
Compact dimensions

Technical Data
Operating voltage 4.0V - 9.0V
Power supply 2S LiPo, 2S LiIon, 2S LiFePo, 5S NiCd/NiMH
Current drain Power-on state 260mA
Current drain Standby 30µA
Maximum load current 2x40A (<30s)
Drop-out voltage 0.3V
Output voltage 6.0V, 7.4V, 7.8V, unregulated
Signal input serial
Supported RC systems PowerBox, Futaba, Jeti, Spektrum, M-Link and Hott
Receiver redundancy SRS
Channels 26
Servo sockets 22
Programmable servo outputs 22
Servo signal resolution 0,25µs
Signal frame rate 10ms, 12ms, 14ms, 16ms, 18ms
Gyro sensor type external iGyro SAT
Number of sensor axes 12
Screen TFT 320x240 pixels
Integral door sequencer yes
Supported telemetry systems P²BUS, S.BUS2, EX-Tele, SRXL2, M-Link, Hott

Dimensions 107 x 69 x 19 mm
Weight 115g
Weight Sensor Switch 15g
Weight of LCD screen 34g
Temperature range -30°C to +105°C

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Oracover CARBON Metalic 1 m
1 x	Oracover Yellow CUB 10 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
1 x	ORACOVER Ferrari red (2 m)
1 x	Oratex Yellow Cub 10 m
1 x	Oratex Natural White 2m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x	Monokote BLANCO jet (1.8x0.65m)
2 x	Ply-Span 450x600/13g Orange
1 x	Papel japones 12 grs/m2 760x510 mm JAPICO
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Oracover Yellow CADMIO 10 m
1 x	Oracover Black 2 m
2 x	Oracover Brown 2 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x	Oracover Yellow CADMIO 2 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	ORACOVER Fluor red (2 m)
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	ORACOVER transparent Yellow (10 m)
1 x	Oratex Red Fokker 10 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	Oracover Red 2 m
1 x	Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x	Jeti Black cap
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (20 pcs)
1 x	Oracover ROYAL RED 2m
1 x	Monokote BLUE metalizado (1.8x0.65m)
1 x	Oracover Azul Cielo 2 m
1 x	Oratex Natural White 20m
1 x	Oracover CHROME 2m
1 x	Oratex Silver 2m
1 x	Ply-Span 450x600/13g Yellow
1 x	Oracover Verde 2 m
2 x	Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Oracover White 10 m
1 x	Ply-Span 450x600/13g White
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	SE Ring 200 mm (2 pcs)
2 x	Tape GFK 38 mm
1 x	Pad Screw Mount M3, up to 3mm / 0.12″, (10 pcs)
1 x	Spikes Band (5 m)
1 x	SE Ring 250 mm (2 pcs)
1 x	SE Ring 450 mm (2 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Ring 320 mm length (5 pcs)
1 x	Foil for sticking flaps and ailerons
1 x	Cinta Goldfix 1m
1 x	Tape GFK 25 mm
1 x	Marker ties (20 pcs)
1 x	SE Ring 400 mm (2 pcs)
1 x	SE Ring 350 mm (2 pcs)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x	20x200 mm battery rings
1 x	SE Ring 330 mm (4 pcs)
1 x	5 mm M2 variable horn
1 x	Brass control horn M4 short for wire (4 pcs)
1 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Copier 2x20 cm pcs
1 x	Aluminium wide washer M4 Blue (4 pcs)
1 x	ABS tube 14.0x10.0x1000 mm
1 x	Pilot "Goose" (Slimline)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x	165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x	ABS 500 x 400 x 1 mm (white)
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	6,4x1000 mm 2:1 black termoretract tube
3 x	Angle support XT60 conector
2 x	Support Filtro FESTO
1 x	Carbon plate 550x350x2.5 mm ECOTECH
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Glass fabric 163 g/m² 130cmx5m (Interglas 92105, aero, finish
1 x	PVC transparent red battery termo-retract 68 mm (10 m)
1 x	Fibra vidrio 25g 110 cm/ 10m (Interglass 02034, finish FE800 pl
1 x	PVC yellow-orange transparent battery termo-retract 57 mm (1 m)
1 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	SIG Coverall 1.2x4.5 m
1 x	Carbon plate 350x150x5.0 mm
1 x	PVC transparent black termo-retract battery 185 mm (1 m)
1 x
1 x	Ply-Span 450x600/13g Blue
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x	Oracover Green10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
1 x	ABS 500 x 400 x 1,5 mm (white)
2 x	Tapa estado carga XT-60 (6 pcs)
1 x	Sukhoi 29S 2,6 m Yellow/Black (SebART)
1 x	Soporte grifo FESTO (2 pcs)
1 x	90x60 mm standart servo cover
1 x	Servo BMS-4112
1 x	Servo ROBBE FS-31 Pico Servo
1 x	Servo HITEC HS-225 BB
1 x	Carbon Non-Woven, 160 g/m² 100 cm 5m
1 x	Spinner fixed propeller 42 mm / 5,0 mm
2 x	Soporte filtro FESTO (4 pcs)
2 x	Support conector MPX (6 pcs)
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
2 x	Aro pasacable Ø25 mm (4 pcs)
2 x	Support Antena 2.4 Ghz (2 pcs)
1 x	Support pumb/filter Xicoy X45
1 x	Sun Cover PC 21 XXL (JMB Jets)
2 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Suncover 100cc Red
1 x	Spinner fixed propeller 60 mm / 5,0 mm
2 x	Support FUEL DOT V3
2 x	Recessed MPX connector support (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x	ARS 300 91" ARF 2311mm ORANGE
1 x	Support ECU Xicoy X-45
1 x	EDGE 540 1.73m SEAGULL Model
1 x	Tube support Ø 6mm (10 pcs)
1 x	EDGE 540-A 74" (1880 mm)
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 03 ARF
1 x	Support Flush MPX Conector (6 pcs)
1 x	SLICK 103" Yellow/Blue ARF (Color 2) 2630 mm
1 x	Sukhoi 29S 2,6 m,CF landing gear(SebART)
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Support Pitot JETI
1 x	SLICK 360-B 104" (2640 mm)
1 x	PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x	Soporte grifo FESTO vertical (1 pcs)
1 x	Support pump Xicoy X45
1 x	65 mm mini servo cover
1 x	11 mm wing servo holder
1 x	50x45 mm micro-mini servo cover
1 x	58 mm micro servo cover
1 x	Servo TOPMODEL STANDARD S3217
1 x	57 mm micro-mini servo cover
1 x	Servo TOPMODEL DS1413 T
1 x	Servo TOPMODEL DS9010 T
1 x	Servo HITEC HS-125 MG
1 x	HPP-21 PLUS PC Programmer for Hitec Digital Servos
1 x	Servo GO-1035MG 16 kg.cm 0.08s/60º
1 x	Servo HITEC HS-5485 HB Digi
1 x	HPP-25 PLUS PC Programmer for Hitec Digital Servos Field Program

20,329.57EUR