Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Combo KAVAN C3536-1250 + KAVANA R50SB +
59.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Horn F3A de Titanium 16 mm (2 units)
1 x	6 mm M3 variable inclined horn
1 x	Extra-long adjustable aluminium control horn 2,8x34
2 x	Horn micro type4 Ø 0,5 (2 pcs)
1 x	Horn mando long (2 pcs)
1 x	Horn mando small (2 pcs)
1 x	Brass control horn M2 long for wire (10pcs)
2 x	Brass control horn M4 short for wire (4 pcs)
2 x	Cable with accesories
3 x	Brass control horn M4 long for wire (4 pcs)
1 x	Brass control horn M4 short for wire (10pcs)
2 x	Adjustable brass horn threaded M3
2 x	Horn 6/35 with M3 Bearing
2 x	Brass control horn M2 large for wire (2pcs)
2 x	6 mm blue aluminium threaded horn with patella
3 x	Horn for flap control (1 pcs)
3 x	Control horn long w/ball
2 x	20 mm carbon horn
2 x	Cable control set
3 x	Horn 6/20 with M3 Bearing
2 x	Horn 16,5x20 mm (2 pcs)
2 x	Horn DUBRO 1/2A
1 x	Horn 5/15 with M2 Bearing
2 x	6 mm red aluminium threaded horn with patella
1 x	5 mm M2 variable horn
3 x	Brass control horn M2 short for wire (2 pcs)
2 x	Horn 6/27 with M3 Bearing
1 x	Duralumium F3A horn 30x10x23,5 mm (2 pcs)
1 x	6 mm aluminium horn with patella
1 x	EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x	Conector BEC male (10 pcs)
1 x	XH female balance (2S) connector (2 pcs)
1 x	Banna gold connector 2,5 mm (M/F)
2 x	Connectors banna oro 4 mm (M/F)
1 x	2 mm female connector (2 pcs) with safety connector
1 x	Wing connector 8pin with pin strip, plug & socket
3 x	Conector AS150 7mm antichispazo (Set: 2 pares)
1 x	Connectors banna oro 8,0 mm (M/F)
2 x	XH female balance (4S) connector (2 pcs)
1 x	XH female balance (5S) connector (2 pcs)
1 x	Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x	MPX Sub-D Adaptor
1 x	Connectors banna oro 6,0 mm (M/F)
1 x	XH male balance (5S) connector (2 pcs)
1 x	Connectors DEANS 4 pins (1 pair)
1 x	Connectors banna oro 8,0 mm 5 pcs(Female)
1 x	XH male balance (3S) connector (2 pcs)
1 x	Connectors banna gold 5,5 mm (M/F)
1 x	Connectors banna oro 2 mm (M/F) (ultralight)
1 x	XH male balance (4S) connector (2 pcs)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Connectors banna oro 2 mm (M/F)
1 x	Banna gold connector 2,5 mm (100 M/F pairs)
1 x	Gold antispark 5,5 mm plug
1 x	Connectors banna oro 3,5 mm (M/F)
1 x	Brass hexagonal rod Ø 3.5 mm x 1000 mm
1 x	Straightened threaded rod M2-1m
2 x	Straightened rod Ø 2.0 mm x 1000 mm
2 x	Straightened rod Ø 4.5 mm x 1000 mm
2 x	Straightened rod Ø 14.0 mm x 1000 mm
1 x	Brass hexagonal rod Ø 5 mm x 1000 mm
2 x	Straightened rod Ø 1.5 mm x 1000 mm
1 x	Small aluminium horn red (2pcs)
1 x	Threaded coupler ALU M2 Ø 4 (2 uds)
1 x	LH long black aluminium horn L31xH30 (2pcs)
1 x	Horn with ball 40x30
1 x	Threaded coupler ALU M2 Ø 3 (2 uds)
1 x	Threaded coupler ALU M3 Ø 6 (2 uds)
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Mahogany wood slat 1.5x1.5x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Horn 20x28,5 mm (2 pcs)
2 x	Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x	Pine wood slat 3.0x7.0x1000 mm
1 x	SlowFlyer control horn (3 pcs)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Small aluminium horn gold (2pcs)
2 x	BALSA trip 8.0x8.0x1000 mm
2 x	Brass control horn M3 short for wire (2 pcs)
1 x	LH long aluminium horn L31xH30 (2pcs)
1 x	Threaded coupler ALU M2,5 Ø 3 (2 uds)
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Threaded coupler ALU Left M3 Ø 4 (2 uds)
1 x	Beech dowels 4.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Liston HAYA 10 x 10 x 1000 mm
1 x	Linden wood slat 2.0x2.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	BALSA triangular 10x10x1000 mm
2 x	Pine wood slat 6.0x6.0x1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
2 x	BALSA triangular 8x8x1000 mm
1 x	BALSA triangular 6x6x1000 mm
2 x	BALSA trip 2.0x2.0x1000 mm
1 x	Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Threaded coupler ALU M3 Ø 5 (2 uds)
1 x	Clevis plastico I=45 mm / hole 3mm / pin 1 (2 pcs)
1 x	Indoor hinge with servo arm integraded
1 x	Medium extra-strong control horn with bearing 2,8x24
1 x	Rudder forward 80x28 "type Kato"
1 x	Small adjustable aluminium control horn with bearing 2,8x15
1 x	Ball link V1 Ø7 M4/3 (6 uds)
1 x	Threaded coupler Micro M2 Ø 0,8 mm (10 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 5 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 4 mm
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 7 mm
1 x	Long extra-strong control horn with bearing 2,8x34
1 x	Micro control horn (2 pcs)
1 x	Z type of cable coupler Ø 2 (2 uds)
1 x	Horns indoor
2 x	Z type of cable coupler Ø 1.8 (2 uds)
1 x	Z type of cable coupler Ø 1 (2 uds)
1 x	Long horn 50x26
1 x	Threaded coupler ALU M3 Ø 4 (2 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Threaded coupler ALU M2,5 Ø 4 (2 uds)
1 x	Aluminium coupler M2,5/2 with ball bearing (1 pcs)
1 x	Threaded coupler M2,5 Ø 2 mm (10 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/24 spline 95º (MKS) pitch 4 mm
1 x	Small aluminium horn blue (2pcs)
1 x	Horn DU-BRO 1/2 (2 pcs)
1 x	Sistema LDS - Ø12 mm servos Ø 5/25 spline 60º (KST) pitch 5 mm
1 x	Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x	Ball link M1.6 (6 uds)
1 x	Tape GFK 25 mm
1 x	Extra long horn 60x30
1 x	MPX housing with flange (4 pcs)
1 x	MPX PCB "Gender-Changer (5 pcs)
1 x	DUPLEX 2.4EX Central Box 220
1 x	Combustible Glow "KAVAN" air/heli 15% nitro
1 x	Porta Kwik link M4 3 mm (2 pcs)
1 x	Red aluminium servo arm V3-Futaba 3,5inch
1 x	aluminium servo arm V1-JR 1,0 inch M2
1 x	Servo TT ACE SHV 1504 MG
1 x	Servo HITEC D-955 TW Titanium
1 x	Blue aluminium servo arm V2-Hitec 1,0 inch M3
1 x	Red aluminium servo arm V1-Futaba 1,5" inch M3
1 x	Servo HITEC D625 MW
1 x	Gear for MICRO BB
1 x	Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x	Programador FUTABA USB CIU-3
1 x	Savox HV Brushless Servo SB-2270SG (Swashplate)
1 x	50x45 mm micro-mini servo cover
1 x	Straightened rod Ø 0.8 mm x 1000 mm
1 x	Servo HITEC D941 TW
1 x	Red aluminium servo arm V2-Futaba 2,0 inch
1 x	89 mm double servo arm with bearing (2 pcs)
1 x	Gear set HITEC HS-55
2 x	Straightened rod Ø 1.2 mm x 1500 mm
2 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Futaba S3010 Servo - Standard BB 0.16s/6.5kg
1 x	Gear set HITEC HS-311/322/325BB
1 x	Servo Mount S (red)
1 x	Straightened rod Ø 4.0 mm x 1000 mm
1 x	Servo HITEC D645 MW
1 x	50 mm servo arm with bearing (2 pcs)
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	Ball Link Plier
1 x	Dean-T Plug Mold
1 x	Fresa corte diamante Ø 2.35mm (lentil)
2 x	BALSA trip 5.0x5.0x1000 mm
1 x	20-25mm Servo Arm
1 x	13 mm wing servo holder
1 x	Blue aluminium servo arm V2-Hitec 1,5 inch M3
1 x	Blue aluminium servo arm V1-Hitec 1,0" inch M2
1 x	Rudder 2_Tray 3.5~4 inch
1 x	Brass hexagonal rod Ø 3 mm x 1000 mm
1 x	Gear set HITEC HS-645MG/5645MG/5685MH
1 x	Rudder 2_Tray 3~3.5 inch
1 x	90x60 mm standart servo cover
1 x	Servo DITEX EL0510M
1 x	Gold aluminium servo arm V2-JR 1,0" inch M3
1 x	Gold aluminium servo arm V1-JR 1,25" inch M3
1 x	Brass rod Ø 0.5 mm x 1000 mm
2 x	Aluminium rod Ø 4.0 mm x 3000 mm
1 x	Straightened rod Ø 3.0 mm x 1000 mm
1 x	Straightened rod Ø 1.0 mm x 1000 mm
1 x	Straightened rod Ø 2.5 mm x 1000 mm
1 x	Servo FUTABA BLS172 SV
1 x	Red aluminium servo arm V3-Futaba 1,25inch M3
1 x	Straightened rod Ø 0.5 mm x 1000 mm
1 x	40 mm servo arm with bearing (2 pcs)
1 x	Brass rod Ø 1.5 mm x 1000 mm
1 x	Servo Mount M (blue)
1 x	Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x	Gates hinge
1 x	Hitec 25 mm servo arm with ball link
1 x	XTorque CFK Servohebel 38 HITEC 25T
1 x	Balsa panel 5.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Hitec 30 mm servo rounded arm
1 x	BALSA trip 4.0x4.0x1000 mm
1 x	55 mm aluminium spinner (Kavan)
1 x
1 x	Debonder CA 20g
1 x	Kwik link with arm M3xM2xL24
1 x	Horn 5/20 with M2 Bearing
1 x	Ø 1,6 mm pin for Kwik link MPJ2160/2161 (6 pcs)
1 x	Birch plywood plate 600x300x2.5 mm
1 x	Pulley brass 4/1,5 (2 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	6 mm M3 variable horn
2 x	Fully Threaded Steel Rod M2,5 (2 uds)
1 x	Ball Link M2 with Ball and Hardware, 10 pcs
1 x	Cable coupler M2 (10 uds)
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	Beech dowels 2.0 x 1000 mm
1 x	Ball link Aluminio M3 (2 pcs)
1 x	Charger SKY RC e680
1 x	4 mm M3 red control terminal (4 pcs)
2 x	GPS Sensor + Logger OPTronics
1 x	Mounting frame MPX male connector
1 x	Protector Connector Dean-T (1 pair)
1 x	EC-Cutter
1 x	Cable adapter iCharger
1 x	Jun-Si iCharger 4010 Duo
1 x	Gyro 3-Ejes REFLEX V2 FMS
2 x	USB Adaptor OPTronics
1 x	Connectors MPX black female
1 x	MPX screwable clips (4 pcs)
1 x	PIN Connector female (100 pcs)
1 x	Wing connector 8pin with pin strip, plug & socket
1 x	Red 3m5 mm connector holder
1 x	Bag connector 2 mm

4,220.64EUR