Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Vasa model Catapult
1 x	Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x6.0 mm (5 pcs)
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	ARAMID honeycomb 1300x2600x2 mm
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 2 m
1 x	Glass fabric tape 49 g/m² (Interglas 02037, finish FE 600/800, p
1 x	Xplorer2 anemometro
1 x	2 LiPo XH>EH adapter
2 x	TP/TopFuel - JST-EH 4/5S Adapter
1 x	JETImodel SINGLE BEC
1 x	Dean "T" - Futaba Adapter
1 x	CM-3
1 x	Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x	Black copper lacquer wire Ø0,2 mm (5 m)
1 x	"Y" charging 4mm wire (2 IN-1 OUT).
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Copper lacquer wire Ø0,2 mm (5 m)
1 x	Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x	3 LiPo XH>EH adapter
1 x	30 cm BEC cable (female)
1 x	CC 02
1 x	USB HLS prog. interface
1 x	ABS Strip 1.5x8.0x1000 mm
1 x	Round Rod 1,5x1000 mm
1 x	ABS Strip 1.5x3.0x1000 mm
1 x	Round Rod 4,0x1000 mm
1 x	ABS Strip 1.0x2.0x1000 mm
1 x	Round Rod 2,0x1000 mm
1 x	ABS Strip 1.0x3.0x1000 mm
1 x	ABS I Strip 10x5x1000 mm
1 x	Strip ABS 2.0x5.0x1000 mm
1 x	ABS Strip 1.0x4.0x1000 mm
1 x	Strip 3,5x1,75x330 mm
1 x	ABS Strip 1.5x6.0x1000 mm
1 x	Round Rod 5,0x1000 mm
1 x	Strip ABS 2.0x8.0x1000 mm
1 x	Strip 1,5x1,5x330 mm
1 x	ABS Strip 1.0x5.0x1000 mm
1 x	Round Rod 2,5x1000 mm
1 x	Round Rod 1,0x1000 mm
1 x	ABS I Strip 20x10x1000 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	Carbon fiber flat 1000x3.0x0.5 mm
1 x	Kwik link AL M4 con Clip (2 pcs)
1 x	Ball Link ALU M3 - RH (1 pcs)
1 x	Cable grommet Ø 6.4 mm (4 uds)
1 x	Long ball link M1.6 (6 uds)
1 x	Connectors banana oro 6,0 mm Ultralight (M/F)
1 x	Oracover Yellow CADMIO 2 m
1 x	PVC plate 320 x 194 x 0.23 mm (brown)
1 x	Fiberglass plate 620x540x0,3 mm
1 x	Sandwich carbon + poplar 3mm + carbon 290x160 mm
1 x	Carbon plate 550x350x3.0 mm ECOTECH
1 x	Fiberglass plate 350x150x4.0 mm
1 x	Fiberglass plate 620x540x1,0 mm
1 x	Fiberglass plate 350x150x1.5 mm
1 x	Fiberglass plate 350x150x0.5 mm
2 x	Teflon rollers 80 mm x 15 mm Diam.
2 x	Teflon rollers 40 mm x 15 mm Diam.
1 x	Sandwich carbon + poplar 2mm + carbon 480x290 mm
1 x	120x60 mm SLH KOVO wheel
1 x	Release film 100 cm x 50 m
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	Stickers-digit for marking
2 x	Fiberglass 25 g/m² 5000x1270 mm
4 x	Ventus 1:4 set of instruments
2 x	Glass fabric 49 g/m² (1,27 x 5 m)
1 x	Angle support XT60 conector
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
2 x	Carbon Non-crimp ST 200 g/m² 50 cm x 5 m
2 x	Glass fabric 80 g/m² (twill) 100 cm x 50m
1 x	Soporte filtro FESTO (4 pcs)
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Glass fabric 80 g/m² (Interglas 05533, finish FK 144, twill weav
2 x	Fiberglass 163 g/m² 1m x 50 m (Aero, finish FK 144, plain)
1 x	Sheet Depron Aero 1250x800x3 mm
2 x	Carbon Non-Woven, 240 g/m² 100 cm x 20 m
2 x	Glass fabric 390 g/m² (silane, twill) 100 cm x 20m
1 x	PET film Mylar® A 350, 50 cm, roll/ 5 m
1 x	Glow starter with charger 230v
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	MAX BEC 2
1 x	THERMIK XL 4000 mm
1 x	Opto Gas Engine Kill Switch
1 x	Opto Gas Engine Kill Switch
1 x	USB Adaptor OPTronics
1 x	Short Switch On/Off micro
3 x	Lunak ARF 2000 mm Yellow (Hacker Model)
1 x	PSC 6
1 x	USB Interface REVOLECTRIX for CellPRO 10s
1 x	TAKEO 3.6m electric
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	PWC4 wing/fuselage connector for 4 servos
1 x	Prolonguer for Balancer Thunder Power 6S
1 x	Switc electronic 30 Amp
1 x	bavarianDEMON USB cable
1 x	DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x	14 mm portholes (10 pcs)
1 x	39,0 mm propeller (rigth propeller)
1 x	40 mm 1/4" Race propeller (rigth hydropropeller)
1 x	Alfileres de cobre 0,7 x 7 mm, aprox.50 g
1 x	Motor ACTRO 28-4-880
1 x	25,0 mm 3-BL M4 hydro-propeller (rigth hydropropeller)
1 x	39,0 mm propeller (left propeller)
1 x	Aqua RACE 70 (without motor)
1 x	Motor ACTRO 50-2-760
1 x	33,0 mm propeller (left propeller)
1 x	10 mm portholes (10 pcs)
1 x	Propeller balancer
1 x	CA Glue fast 20g
1 x	Foaming agent for epoxy resins 200 g
1 x	Hardener Aero EPH 161 (250 g)
1 x	PARTALL® Hi-Temp Wax, 340 g
1 x	AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
1 x	ARTIST 1.560 mm
1 x	AC-10 pre-rotacion with motor
1 x	Z Bender - S Type Tool
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Hot Glue Stick BLACK
1 x	Fibra de vidrio 80 g/m² (10 m x 100 cm)
1 x	Spinner NUT M10x1
1 x	Fiberglass 163 g/m² 1m x 5 m (Twill)
1 x	Glass fabric 49 g/m² (1,27 x 20 m)
1 x	Fibra de vidrio 80 g/m² (5 m x 100 cm)
1 x	Spinner Alumin. fixed propeller 40 mm / 4,0 mm
1 x	Spinner Alumin. fixed propeller 30 mm / 2,3 mm
1 x	Glass fabric 25 g (2 m²)
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 3m
1 x	Spinner NUT 1/4x28
1 x	Spinner Alumin. fixed propeller 45 mm / 4,0 mm
1 x	51 mm INO spinner (carbon imitation)
1 x	Support FUEL DOT V3
1 x	Spring clamp for tube Ø29 mm ext 1pc
1 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Panasonic Eneloop AA 1,2 V battery 19>00 mAh
1 x	Albatros red/white (Top Model)
1 x	EasyFLY Addon
1 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Astra wing Joinner (Top Model)
1 x	Ball link Aluminio M3 (6 uds) 27x11.9x5.9 mm
1 x	BULLIT Wing 1095 mm
1 x	Aro pasacable Ø20 mm (4 pcs)
1 x	Canopy Sweet / Siesta
1 x	DUPLEX 2,4EX Brackets for Transmitter DC/DS
1 x	Fuel bottle 500 ccm
1 x	Angle measurer
1 x	Medidor ángulos y/o incidencias
1 x	Angle of incidence meter
1 x	CORTEX
1 x	90 mm rods + T patellas set for direction control
1 x	45 mm rods set for direction control
1 x	140 mm rods set for direction control
1 x	Block 21x19 mm (5 pcs)
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 10m
1 x	Spinner NUT M5
1 x	Fiberglass 280 g/m² 5000x1000 mm
1 x	Spinner Alumin. fixed propeller 40 mm / 3,2 mm
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 5m
1 x	Spinner NUT M4
1 x	Carbon Non-Woven, 245 g/m² 125 cm x 20 m
1 x	Carbon fabric 68 g/m² (style 493 aero, plain weave) 100 cm
1 x	Spinner NUT M6
1 x	Spinner NUT M8x1,25
1 x	Fibra de vidrio 80 g/m² (2 m x 100 cm)
1 x	Fibra de vidrio 100 g/m² (50 m x 100 cm)
1 x	Spinner Alumin. fixed propeller 30 mm / 3,2 mm
1 x	Fiberglass 163 g/m² 1m x 20 m (Aero, finish FK 144, plain)
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Glass fabric 160 g/m² (Twill weave) 100 cm x 20m
1 x	Carbon Non-crimp ST 100 g/m² 50 cm x 10 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 10 m
1 x	Carbon Non-Woven, 240 g/m² 100 cm x 2m
1 x	Spinner Alumin. fixed propeller 40 mm / 3,0 mm
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 20m
1 x	Spinner NUT M5
1 x	Fibra de vidrio 80 g/m² (3 m x 100 cm)
1 x	Spinner Alumin. fixed propeller 40 mm / 5,0 mm
1 x	Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x	Glass fabric 49 g/m² (1,27 x 10 m)
1 x	Spinner Alumin. fixed propeller 30 mm / 3,0 mm
1 x	Support XT60 conector (2 pcs)
1 x	82 mm INO spinner (carbon imitation)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Recessed MPX connector support (6 pcs)
1 x	Neck strap JETI DC
1 x	DUPLEX 2.4EX MAlti (Rev.2)
1 x	VAGABOND 1500 mm ARF V2 (Red)
1 x	FOX ARF 2000 mm Red (Hacker Model)

14,802.83EUR