Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Bucker Bu-133 Jungmeister #69 2540 mm ( CY Model)
1,299.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 2,0 mm
1 x	Clevis plastico I=26 mm / hole 2mm / pin 1 (2 pcs)
1 x	Cable coupler M2 (10 uds)
1 x	Ball link duraluminium M3 V1 (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Kwik link AL M2,5 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link with arm M3xM2xL24
1 x	Clevis plastico I=30 mm / hole 2.5mm / pin 1 (2 pcs)
1 x	Kwik link AL M3 L:30 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminium red ball links M3 V1 (10 pcs)
1 x	Cable coupler M3 (10 uds)
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Kwik link AL M3 L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	M4xM2,5xL30 nylon clevis and arm (10 uds)
1 x	Couple M4 for wire (10 pcs)
1 x	Metal ball clevis M3 (10 uds)
2 x	Cable coupler M2x66 (2 uds)
1 x	Kwik link AL M3 L:40 mm (2 pcs) + Pin Ø 2,5 mm
1 x	Black large kwik link (10 pcs)
1 x	Brass ball links BS M3 V1 (10 pcs)
1 x	Kwik link AL Ø2 mm L:23 mm (2 pcs) + Pin Ø 1,6 mm
1 x	Kwik link with arm M5xM2,5xL30
1 x	Aluminium blue ball links M3 V1 (10 pcs)
1 x	Angled clevis with threaded rod M3
1 x	Carbon fiber rod 3.0 mm x 1000 mm
2 x	Carbon fiber flat 1000x3.0x1.0 mm
1 x	Carbon fiber rod 7.0 mmx1000 mm
1 x	Carbon fiber rod 20 mmx1000 mm
1 x	Carbon fiber rod 2.5 mmx1000 mm
2 x	Carbon fiber rod 1.5 mm x 2000 mm
2 x	Carbon fiber rod 6.0 mmx1000 mm
2 x	Carbon fiber rod 8.0 mmx1000 mm
1 x	Carbon rectangular rod 10.0 mm x 1.0 x 1000 mm
3 x	Carbon fiber rod 10 mm x 1000 mm
1 x	Carbon rectangular rod 3.0 mm x 1.0 x 1000 mm
2 x	Carbon fiber rod 2.0 mmx1000 mm
1 x	Carbon fiber rod 12 mm x 1000 mm
1 x	Carbon fiber rod 0.8 mmx1000 mm
2 x	Aluminium cap bolt washer M3 red (8 pcs)
1 x	Aluminium cap bolt washer M3 blue (8 pcs)
1 x	M3 black washers (4 pcs)
1 x	Spring lock washer 4.1 mm (20 pcs)
1 x	Flat washer 3.2 mm (20 pcs)
1 x	Aluminium cap bolt washer M3 green (8 pcs)
2 x	Flat washer 4.3 mm (20 pcs)
1 x	Lock washer 2.2 mm (20 pcs)
2 x	M3-M4 rubber washer (8 pcs)
2 x	Aluminium wide washer M4 Blue (4 pcs)
2 x	Quicklock washer 1.5 mm (10 pcs)
1 x	Quicklock washer 3 mm (10 pcs)
1 x	Circlik for shaft 1.2 mm (10 pcs)
2 x	Quicklock washer 1 mm (10 pcs)
1 x	Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
1 x	Brass rod Ø 0.8 mm x 1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Digital Air Speed Sensor And Pitot Tube Set
1 x	Extension silicon 30 cm male (Futaba)
2 x	Ball link Aluminio M3 x 3 x 5 x 18mm (6 uds)
1 x	Jodel D.9 BeBe 2.400 mm Kit
1 x	Blades 330mm
2 x	PIT (Aero-Naut)
2 x	Cable coupler M2,5 (2 pcs)
2 x	FunCup XL RR
1 x	Me-163
1 x	6 mm red aluminium threaded horn with patella
1 x	4 mm M3 red control terminal (4 pcs)
2 x	ROBIN S50E BLUE/WHITE
2 x	BULLIT Wing 840 mm
1 x	DRACO 2.0m BNF
2 x	BETA 1400 RTF Red
1 x	de Havilland Vampire (Rc Factory)
1 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber flat 1000x3.0x0.5 mm
2 x	Carbon fiber rod 1.5 mm x 1000 mm
1 x	Carbon fiber rod 16 mm x 1000 mm
2 x	Carbon fiber rod 5.0 mmx1000 mm
1 x	Carbon fiber rod 14 mmx1000 mm
1 x	10 mm floating pad (72 pcs)
1 x	Aluminium cap bolt washer M4 red (8 pcs)
1 x	Carbon wing joinner 13,4 mm Ø 0,48 mm
1 x	Ball Link Plier
1 x	12 mm floating pad (49 pcs)
1 x	Flat washer 2.2 mm (20 pcs)
1 x	Sanyo Eneloop AAA 1,2 V battery 800 mAh
1 x	Z Bender - S Type Tool
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	Xplorer1 anemometro
1 x	Starter 12v (Max 180 and 30ccm)
1 x	Antenna Cloverleaf 5.8 GHz Tx - Rx
1 x	Lock washer 2.7 mm (20 pcs)
1 x	Beech dowels 2.0 x 1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Balsa panel 1.0x100x1000 mm
1 x	OBECHI sheet 2.0x3.0x1000 mm
1 x	Pine wood slat 1.5x3.0x1000 mm
1 x	BALSA trip 2.0x2.0x1000 mm
1 x	Liston HAYA 8 x 8 x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA trip 6.0x6.0x1000 mm
1 x	BALSA triangular 6x6x1000 mm
1 x	BALSA triangular 15x15x1000 mm
1 x	Balsa panel 1.5x100x1000 mm
1 x	Mahogany wood slat 2.0x2.0x1000 mm
1 x	BALSA trip 10x10x1000 mm
1 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 10x10x1000 mm
1 x	BALSA triangular 10x10x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
2 x	Lipo GENS 2300 6.6v 2s1p Li-Fe Pack emisora
1 x	Propeller Pleg CAM Carbon 13x10
1 x	Propeller Pleg CAM Carbon 10x6
1 x	Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x	Electric starter suitable for the DLE111, DLE120 and DLE85.
1 x	Spring lock washer 3.1 mm (20 pcs)
1 x	Dust collector for mould cleaning
1 x	Screw M3x16 (10 pcs)
1 x	Oils Pumps Empty (1 liter)
1 x	Spring lock washer 2.6 mm (20 pcs)
1 x	Screw M2.5x5 (10 pcs)
1 x	Aluminum Bayonet / strongal D35 mm / 1 m
1 x	Xplorer2 anemometro
1 x	Tapping Screw M2.9x9.5 (10 pcs)
1 x	Tapping Screw M2.2x13 (10 pcs)
1 x	Digital precision scale up to 2000 g
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Pan Head Screw M1,6x8 (10 pcs)
1 x	Xplorer3 anemometro
1 x	Lock washer 3.2 mm (20 pcs)
1 x	Baseplate servo
1 x	Tapping Screw M2.2x9.5 (10 pcs)
2 x	BETA 1400 ARF Red
1 x	DRACO 2.0m PNP
1 x	CESSNA 50E White/Blue
1 x	JOKER 3 1550mm
1 x	Boomerang SPRINT V2 Red/White/Blue
2 x	DRACO 2.0m Helice 14.5x9 4-Blade
1 x	SkyMaxx 1.550 mm (kit)
1 x	FunCub NG azul RR
2 x	DRACO 2.0m Wheel set
1 x	CESSNA 50E White/Red
1 x	Turbo Timber Evolution 1.5m PNP
1 x	BULLIT Wing 1095 mm
1 x	WINGO 2 PNP
1 x	DOMINO 46-55 Trainer 1583 mm
1 x	Cessna SKYLANE T182 1.75m - Seagull Model
1 x	MAULE M-7-420 2.8m Red
1 x	45 mm rods + T patellas set for direction control
1 x	90 mm rods + T patellas set for direction control
1 x	100 mm rods + T patellas set for direction control
1 x	6 mm blue aluminium threaded horn with patella
1 x	WINGO 2 ARF
1 x	Truck-trailer for gliders 720 x 285 mm
1 x	Boomerang ELAN THUNDERBIRD Combo
1 x	Carbon fiber flat 1000x6.0x0.8 mm
1 x	HAWKER HUNTER 1:5,8 (1.770mm)
1 x	Propeller 11x4,7 SlowFlyer
1 x	Xoar Electric Beechwood Prop 12x6
1 x	Propeller MEJZLIK 20x13 Electric light (41 g)
1 x	METEOR 1.000 mm kit
1 x	Carbon fiber rod 0.5 mmx1000 mm
1 x	Bags wings/rudder ODYSSEY
1 x	Tank + hopper Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x	HAWKER HUNTER 1:5,8, Electric retract landing gear
1 x	ASPIRE Red ARF 2.000 mm, Set Alas
1 x	Tank + hopper Kevlar ASPIRE 6 L Kero
1 x	ASPIRE Red ARF 2.000 mm, Front Fuselage
1 x	Propeller 8x4,3 SlowFlyer
1 x	L-39 Albatros 1:4.75, Electric retract landing gear
1 x	F-4 Phantom Scale 1:7, Electric retract landing gear
1 x	Tank Kevlar ASPIRE 4 L Kero / 1.5 L Smoke
1 x	Bags de Luxe ASPIRE
1 x	F9F COUGAR Grey ARF 1.562 mm
1 x	ASPIRE Red ARF 2.000 mm, Canopy
1 x	ASPIRE Navy ARF 2.000 mm
1 x	Xoar Electric Beechwood Prop 24x8
1 x	PropCover 16-20" (2 pcs)
1 x	Propeller MEJZLIK 21x10 Electric light (36 g)
1 x	Pipa 3D F-16 Scale 1/6
1 x	Spinner INO 89 mm Chrome (Imitacion metal)
2 x	Birch plywood plate 600x300x1.5 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
2 x	Plywood sheet BEECH 600 x 300 x 2,0 mm
1 x	A/C quality beech plywood 600x300x8.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	Balsa panel 2.5x100x1000 mm
1 x	Balsa panel 3.0x100x1000 mm
2 x	Balsa panel 2.0x100x1000 mm
1 x	Birch plywood plate 600x300x4.0 mm
1 x	Adjustable launching hook
1 x	Carbon tube (L 1000 mm, Ø12 mm, Ø10 mm)
1 x	140 mm rods set for direction control
1 x	Hot Glue Stick BLACK
1 x	Aceite DELUXE turbine Jet Oil 1 litro
1 x	CellPRO 4S Adaptader (GP/KO up to 4S)
1 x	Spinner INO 82 mm Chrome (Imitacion metal)
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Lite Plywood panel 600x300x3.0 mm
1 x	Birch plywood plate 600x300x3.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	A/C quality beech plywood 600x300x1.5 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	A/C quality beech plywood 600x300x6.0 mm
1 x	Birch plywood plate 600x300x2.0 mm
1 x	Liston HAYA 3 x 10 x 1000 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	DUPLEX 2.4EX Central Box 210
1 x	Towing hook <3m
1 x	LOWER TOW HOOK
1 x	Tow hook for tug
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2
1 x	Towing hook
2 x	Battery LiFe TopFuel 3100 mAh 2s MTAG 30C
1 x	Battery LiFe TopFuel 3100 mAh 3s MTAG 30C
2 x	Batetia LiFe 3200 mAh 6.6v MPX PowerBox
1 x	Battery LiFe TopFuel 3100 mAh 4s MTAG 30C

27,195.41EUR