Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB210

258.00EUR

DUPLEX 2.4EX Central Box 210
[JETCB210]

JETI Duplex 2.4EX Central Box 210
Product description and features
The Central Box 210 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 210 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 210 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 210 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Compatibility with Futaba
The Central Box 210 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off The switching on and off process of the Central Box 210 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.
Features
Configurable servo outputs
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
Optional over current protection
The Central Box 210 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.
Feature
Servo outputs 15
Protected servo outputs (for servos with up to 30kg/cm)
Protected servo outputs (for servos with up to 30kg/cm)
Receiver inputs up to 3
Satellite receiver support Yes
Telemetry Yes
DITEX servo telemetry Yes
Battery inputs 2
Supply voltage [V] 4 up to 8.4
Voltage regulator No
Permanent current [A] 20
Peak current (approx. 2 seconds) [A] 90
Idle current [µA] 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 42 x 18 (2.6 x 1.65 x 0.71)
Weight [g] ([oz]) 59 (2.08)

under request

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

Emisora Spektrum NX10 10ch (solo Tx)
619.92EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

3 x	PVC 0,14 qmm servo wire Futaba (5 m)
2 x	White silicone 0,25 qmm wire (150 m)
1 x	Silicone 0,50 qmm servos wire Futaba (100 m)
2 x	Silicone 0,35 qmm servos wire Graupner(100 m)
2 x	Silicone 0,14 qmm servos wire Graupner (5 m)
3 x	Cable servo PREMIUM MAXI 1 m (blanco/rojo/azul) PVC
3 x	Towing hook
2 x	SERVO HOLDER
3 x	PVC 0,14 qmm servos wire Hitec/Mpx (5 m)
3 x	Towing hook
2 x	Green silicone 0,25 qmm wire (50 m)
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
2 x	DYNAMOMETER S-1580
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
3 x	Silicone 0,35 qmm servos wire Futaba (100 m)
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x	Silicone 0,25 qmm servos wire Graupner (100 m)
2 x	1 m servo "Premium" wire (white/red/blue)
2 x	JR silicone servo wire 0,35 qmm / 5m
2 x	PVC 0,35 qmm servos wire Graupner (100 m)
2 x	200m servo "Premium" wire (white/red/blue)
3 x	Towing hook <3m
2 x	White silicone 0,25 mm² wire (25 m)
2 x	PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
2 x	PVC 0,14 qmm servos wire Graupner (100 m)
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
2 x	Tow hook for tug
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
2 x	White silicone 0,25 qmm wire (100 m)
1 x	10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x	5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cinta Goldfix 1m
2 x	20x1000 mm Ring Strap Back To Back
1 x	SE Ring 330 mm (4 pcs)
1 x	SE Ring 240 mm (2 pcs)
1 x	Marker ties (20 pcs)
1 x	SE Ring 250 mm (2 pcs)
2 x	SE Ring 300 mm (2 pcs)
1 x	Spikes Band (5 m)
1 x	13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x	Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x	Beech dowels 3.0 x 1000 mm
1 x	Pine wood slat 3.0x10.0x1000 mm
1 x	BALSA trip 3.0x5.0x1000 mm
1 x	Linden wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 2.0x2.0x1000 mm
1 x	BALSA leading edge 8x10x1000 mm
1 x	Pine wood slat 2.0x10.0x1000 mm
1 x	Pine wood slat 2.0x2.0x1000 mm
1 x	Mahogany wood slat 3.0x3.0x1000 mm
1 x	Walnut wood slat 1.5x1.5x1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	BALSA triangular 8x8x1000 mm
1 x	Canopy hinges for Discus 2c, Discus 2a, Ventus 2cx (2pcs)
1 x	18 mm reinforced hinge
1 x	48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x	Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x	67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x
1 x	2000A 12V Lithium Jump Starter with 150PSI Air inflator
1 x	Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x	Pin type hinge Al 3,0x50 mm (2 pcs)
1 x	Long pinned hinge (12 uds)
1 x	Gates hinge
1 x	48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
1 x	Nylon hinge 15x0,3 (10 pcs)
1 x	Nylon hinge for flaps 33x9 (2 pcs)
1 x	Flap hinge 33x9 mm (6 pcs)
1 x	Pin type hinge Al 4,5x70 mm (2 pcs)
1 x	Pin type hinge Al 6x98 mm (2 pcs)
1 x	43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x	Gates hinge black 30x16 mm (2 pcs)
2 x	Large flex hinge (12 uds)
2 x	Unmounted aluminium pin 6x98 mm (2 pcs)
1 x	Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x	15 mm reinforced hinge
1 x	B4-0 rocket charges (6 pcs)
1 x	White smoke bombs AX-9 (10 pcs)
3 x	Smoke set "M"
2 x	Green smoke canister 140 g
2 x	Mixers smoke bombs AX-60 (5 pcs)
1 x	White smoke canister 140 g
3 x	Yellow smoke canister 100 g
3 x	Ventral support for AX-18/AX-60
1 x	Green smoke canister 100 g
1 x	AX-60 starters (5 pcs)
2 x	Red smoke bombs AX-60 (5 pcs)
1 x	"S" set for planes
1 x	White smoke bombs AX-18 (5 pcs)
2 x	White smoke canister 65 g
1 x	Yellow smoke bombs AX-60 (5 pcs)
1 x	Prolongador S-Bus JR/JR 20cm
1 x	M3 INDUSTRIAL ball link (2 uds)
1 x	Set cintas unión paracaídas 145 cm
1 x	1/12 Pilot "Tom"
1 x	Piloto Jet "Green" 1/6 Scale
1 x	Screwdriver for Hexagon 1,27mm
1 x	Locking cable tie 4.6x203 (uds)
1 x	Adjustable launching hook
2 x	Silicone black 6,0 qmm wire ( 1 m)
2 x	Silicone red 1,5 qmm wire ( 1 m)
2 x	Silicone red 0,75 qmm wire ( 25 m)
2 x	Sun Cover ULTIMATUM 2.0 (Hispano Aviacion)
2 x	Silicone red 0,25 mm² wire (25 m)
3 x	Silicone black 2,5 qmm wire ( 1 m)
1 x	Silicon red 1,0 qmm cable ( 25 m)
4 x	Protective Cover for wires Ø 20 mm 1000 mm
2 x	Silicone 0,25 qmm servos wire Graupner (5 m)
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 4 cell
2 x	Cable set PREMIUM Maxi, SUB-Done 4three fuselage/wing 200 cm
2 x	Extension MPX-MPX 20 cm
2 x	Cable Cargador FUTABA
1 x	Tube support Ø 6mm (10 pcs)
2 x	Protective Cover for wires Ø 15 mm 1000 mm
2 x	PVC 0,14 qmm servos wire JR/Graupner (5 m)
1 x	Tapa estado carga XT-60 (6 pcs)
2 x	5 line servos wire black (1 m)
2 x	Green silicone 0,25 mm² wire (25 m)
2 x	PVC 0,08 qmm Futaba servos wire (5 m)
1 x	20x200 mm battery rings
1 x	13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
2 x	Tape GFK 50 mm
1 x	SE Ring 480 mm (2 pcs)
1 x	Tape GFK 25 mm
1 x	PCARD Wireless System
1 x	Red smoke canister 65 g
2 x	Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x	Motor A2212/13T
1 x	Long pinned hinge (6 uds)
1 x	Servo NARO Max Std
1 x	Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x	Flap hinge (6 pcs)
1 x	AX-60 starters (5 pcs)
2 x	Yellow smoke canister 65 g
1 x	Plastic caps for AIR BURTS (30 pcs)
1 x	Initior Transmitter FTX2 Wireless
1 x	Yellow smoke canister 140 g
1 x	Black smoke bombs AX-60 (5 pcs)
2 x	Protective Cover for wires Ø 6 mm 1000 mm
1 x	PILATUS PC-6 Turbo Porter 33% 5.290 mm
1 x	Sukhoi 29S 2,6 m White/Blue (SebART)
1 x	Turbina XICOY X180 compact
1 x	Turbina XICOY X95 compact
2 x	Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
2 x	Fiberglass heat shield Ø 4 mm 1000 mm
1 x	Protective Cover for wires Ø 10 mm 1000 mm
3 x	Silicone black 0,5 qmm wire ( 1 m)
2 x	Silicone black 1,5 qmm wire ( 1 m)
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	10m servo "Premium" wire (white/red/blue)
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	EDGE 540-A 105" (2660 mm)
1 x	SLICK 360-B 104" (2640 mm)
1 x	Suncover 100cc Red
1 x	Bidule 55 V3 2460 mm
1 x	Red silicone 1,0 qmm wire (50 m)
2 x	SLICK 103" Red/Yellow/Black ARF (Color 2) 2630 mm
1 x	Sebart 2.2 m WHITE/BLUE (SebART)
1 x	CARBON CUB 15cc ARF 2280 mm
1 x	Silicone black 0,5 qmm wire ( 25 m)
1 x	Protective open Cover for wires Ø 13 mm 1000 mm
1 x	Silicone black 1,0 qmm wire (100 m)
2 x	Silicone black 1,0 qmm wire ( 1 m)
2 x	PVC 0,08 qmm Graupner servos wire (5 m)
1 x	Silicone black 0,75 qmm cable ( 1 m)
1 x	EDGE 540 1.73m SEAGULL Model
1 x	EXTRA NG 74" white/red/blue (Skywing RC)
1 x	Bidule 170 ARF 3.48 m
1 x	Sun Cover BULL Mo1 2.6 (Hispano Aviacion)
1 x	SLICK 360-A 104" (2640 mm)
1 x	CARBON CUB FX-3 100-200CC ARF, 165" - 4200 mm (Hangar9)
1 x	Protective Cover for wires Ø 3 mm 1000 mm
1 x	Bidule 55 2460 mm Cabina
1 x	Silicone 0,50 qmm servos wire Graupner(5 m)
1 x	Sun Cover PC 21 XXL (JMB Jets)
1 x	EXTRA NG 74" yello/blue/red (Skywing RC)
1 x	Bidule 111 3000 mm Canopy
1 x	SKY MASTER 3.000 mm ARF
1 x	Fixed launching hook
1 x	Turbina X45 H "Light Version"
1 x	Turbina X132 H "Light Version"
1 x	Turbina X132 H "Compact Version"
1 x	Turbina X45 H "compact"
3 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
1 x	Silicone red 1,0 qmm wire ( 1 m)
1 x	Fiberglass heat shield Ø 8 mm 1000 mm
3 x	6 mm Quick clamp_S (10 pcs)
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Protective Cover for wires Ø 6 mm 1000 mm
2 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 2 cell
2 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 2 cell
2 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x	Fiberglass heat shield Ø 6 mm 1000 mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Silicone red 6,0 qmm wire ( 1 m)
2 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Aluminun wheel collar 2.5 mm Ø (4 uds)
1 x	PT 21x13 EL Propeller
1 x	Propeller POWER-PROP 7x7
1 x	Aluminun wheel collar 4 mm Ø (4 uds)
1 x	12 mm dogdrive props
1 x	Adapter 3,0 mm M5 for spinner 30 mm fixed propeller
1 x	Connectors banna oro 2 mm (M/F)
1 x	Adapter 4,0 mm M8
1 x	Aluminun wheel collar 3 mm Ø (4 uds)
1 x	2,3 mm Prop Adapter M5
1 x	Sandwich carbon + poplar 4mm + carbon 290x160 mm
1 x	Decorative caps, multicoloured
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	BALSA trip 2.0x10.0x1000 mm
1 x	Duplex 2.4EX tray transmitter DC-16 II Black multimode
1 x	Battery RX JETI LiIon RB 2600 7.2v
1 x	DUPLEX 2.4EX Expander E4
2 x	Wing tips support for AX-18/AX-60 (2 pcs)
2 x	Green smoke canister 65 g
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x	XH/XH 30 cm Female extension 0,25 mm2 silicone cable for 6 cell
1 x	Silicone red 0,75 qmm wire ( 1 m)
1 x	Yellow silicone 0,5 qmm wire (50 m)
1 x	EXTRA 330L 35% hardware pack (Precision Aerobatics)
1 x	FOD guard for VT80BL, M90, M100K, M100XBL, M140K, M140XBL and M

46,485.97EUR