398.99EUR

DUPLEX 2.4EX Central Box 320
[JETCB320]


JETI Duplex 2.4EX Central Box 320

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements. The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes


temporarily out of stock
temporarily out of stock

Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
1 x Para-RC Mix
1 x Paramotor Trike XL
1 x MAX pilot ARTF
1 x Parachute P4
1 x Windsock Ozone L -1200 mm
2 x Wing OXY 0,5 pulgadas2
1 x Paramotor BackPack XXS (without accessories)
1 x Ballast 700gr OPALE
1 x Motor DLE 430 cc - Paramotors
1 x Cap Hispano Aviación
1 x Fascination 3600 mm, Spare Wings (Top Model)
1 x E-FUN BUG (ROI-Import)
1 x JEEMO Kit ARF Basic (2 color Carbon finish) XTRALIGHT
1 x Presto SF Light Filler styrene-free (420 g)
1 x 20 mm carbon horn
2 x Spannlack 1000 ml
1 x Silicone 0,14 qmm servos wire Graupner (100 m)
2 x PIX Hawk with accesories
1 x Streamline Stainless Steel Tubing 9.0x5.0x1000 mm
1 x ABS angle 1.5x1.5x1000 mm
1 x Locking cable tie 4.6x203 (uds)
1 x Monokote BLANCO jet (1.8x0.65m)
1 x Oracover Verde 2 m
1 x Oracover Black 10 m
1 x 200m servo "Premium" wire (white/red/blue)
2 x RH long aluminium horn (2pcs)
1 x ABS "T" angle 10.0x10.0x1000 mm
1 x Papel japones 12 grs/m2 760x510 mm JAPICO
2 x Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
2 x Spray YELLOW Inca Lexan 150ml
1 x 6 mm ball link M3 (10 pcs)
1 x ABS "T" angle 4.0x4.0x1000 mm
1 x Profile ABS Square 3 x 1000 mm
1 x Oratex Silver 2m
2 x Universal Colour Paste deep black 250 g
1 x Threaded coupler ALU M2,5 Ø 6 (2 uds)
1 x Silicone 0,35 qmm servos wire Futaba (100 m)
1 x Threaded coupler ALU M2 Ø 3 (2 uds)
1 x 500 ml sealer (DOPE)
1 x Adapter 3,0 mm M6
2 x L-Connector 4.0 mm x 1000 mm
1 x PVC 0,08 qmm Futaba servos wire (5 m)
2 x M2 5Diam short black ball link V2 (2 pcs)
1 x M2,5 Diam metal short ball link V3 (2 pcs)
1 x 2,3 mm Prop Adapter M5
2 x Ball link M3 (10 pcs)
1 x Silicone 0,35 qmm servos cable Futaba (5 m)
2 x Threaded coupler M2 (10 uds)
2 x Streamline Stainless Steel Tubing 6.3x3.5x1000 mm
1 x Silicone 0,50 qmm servos wire Graupner(5 m)
1 x Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
2 x PVC 0,14 qmm servo wire Futaba (5 m)
2 x Black silicone 0,25 mm² wire (25 m)
2 x Aluminium alloy coupler for carbon tube 6/M4
1 x PVC 0,25 qmm servos wire Graupner (5 m)
1 x Brass control horn M2 short for wire (2 pcs)
1 x Horn for flap control (1 pcs)
1 x Horn 5/20 with M2 Bearing
1 x Oracover Green10 m
1 x PVC 0,35 qmm servos wire Graupner (100 m)
2 x Adapter 3,2 mm M6 for spinner 40 mm fixed propeller
1 x Green silicone 0,25 qmm wire (50 m)
1 x Oratex Natural White 2m
3 x Long ball link M1.6 (6 uds)
1 x Horn with ball 55x40
2 x Hobbylite Filler, Balsa colour
1 x Streamline Stainless Steel Tubing 19.5x9.8x1000 mm
1 x Suncover 100cc Red
1 x Ball link M1.6 (6 uds)
2 x Profile ABS Square 4 x 1000 mm
1 x Streamline Stainless Steel Tubing 7.5x4.5x1000 mm
2 x 20 g tin paste
2 x ABS angle 2,0x2,0x1000 mm
1 x Oracover White 10 m
1 x Ply-Span 450x600/13g Yellow
1 x Ball link M2 (10 pcs)
1 x Blue metalic ball link M3/3 azul (2 pcs)
1 x Spray adhesive INFUTAC (Clear) 500 ml
2 x M3 Maxi ball link (2 uds)
1 x Ball link Aluminio M4 x 4 x 6 x 26mm (4 uds)
1 x Extension silicon 30 cm female (Futaba)
1 x Z type of cable coupler Ø 1.8 (2 uds)
1 x Parachute BACKUP X100
1 x Ball link V1 Ø7 M4/3 (6 uds)
1 x Para-RC "RC-Evo-Cross" Rescue
1 x Extension 7.5 cm
1 x Ball link duraluminium M3 V1 (10 pcs)
1 x Servo Metal Horn 15.5 mm MKS
1 x Servo MKS HBL380
1 x DG-303 ACRO 3750 mm, canopy
1 x Kobuz 5000 mm (Airwold)
1 x Motor Moki S 400 cc 5 cylinders
1 x Wings Bags JEEMO
1 x Servo MKS HV747
1 x Pulley brass 5/1,5 (2 pcs)
1 x Fox 4000 mm Airworld,cabina
2 x Rubber profile 10-2 mm 2M
1 x EXTRA 330 LX 2.34m ARF (LX-09) Pilot
1 x Spring lock washer 2.6 mm (20 pcs)
1 x Sebart 2.2 m WHITE/BLUE (SebART)
1 x PITTS CHALLENGER 87″ 2.20m (120cc) 02 ARF
1 x Aluminun wheel collar 6 mm Ø (4 uds)
1 x ABS rectangular profile 10x5.0x1000 mm
1 x Blind nut M5 (10 pcs)
2 x Nitroverdu 500 ml
1 x M2/M1/6 3Diam long black ball link V1 (6 pcs)
1 x Paint gun for sprays
1 x Cable grommet Ø 3.2 mm (4 uds)
1 x Cable coupler M2 (10 uds)
1 x Silicone black 0,75 qmm wire ( 25 m)
1 x Yellow silicone 0,5 qmm wire (50 m)
1 x Silicone red 1,5 qmm wire ( 1 m)
1 x Green silicone 0,25 mm² wire (25 m)
1 x Tailwheel for 60/120 size
1 x EDF Stream-Fan 110mm kv780
1 x Threaded coupler Micro M2 Ø 0,8 (10 pcs)
1 x Adapter 4,0 mm M8
1 x Adapter 5,0 mm M8
1 x PVC 0,25 qmm 4 line servos wire JR/Graupner (5 m)
1 x White silicone 0,25 mm² wire (25 m)
1 x Protective Cover for wires Ø 20 mm 1000 mm
1 x 5 line servos wire black (1 m)
1 x M2/M1/6 3Diam long black ball link V1 (2 pcs)
1 x Parachute PV6 for F3J
1 x Trike XL motor set (motor+esc+prop)
1 x EDGE 540-A 91" (2310 mm)
1 x Profile ABS triangular 4.0x1000 mm 90º
1 x Legs + electric brakes for Viper Jet 90
1 x Flat Connector 4.0 mm x 1000 mm
1 x Streamline Stainless Steel Tubing 15.5x8.5x1000 mm
1 x Rubber profile 8-2 mm 2M
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x 160 mm carbon undercarriage (2pcs)
1 x 120 mm leg for retract undercarriage with rotation sistem (1 pcs
1 x Solvent Plasti Dip 1000 ml
2 x Spray EC Red 400ml
1 x ABS "T" angle 2.0x2.0x1000 mm
1 x Cable grommet 9.5 mm (4 uds)
2 x Release wax 250ml
1 x Profile ABS half cane 5.0x1000 mm
1 x Socket head long ball link M3 (6 uds)
1 x M3 INDUSTRIAL ball link (2 uds)
2 x Silicone adhesive ELASTOSIL® E4, tube/ 90 ml
1 x Universal Colour Paste deep black 50 g
1 x Socket head long ball link M3 (2 uds)
1 x ABS angle 3,0x3,0x1000 mm
1 x Blind nut M6 (4 pcs)
1 x Black large kwik link (10 pcs)
1 x M2 5Diam black ball link V2 (2 pcs)
1 x Painting GHT Lexan Black 150 ml
1 x ABS rectangular profile 12x6.0x1000 mm
1 x Universal Colour Paste white 50 g
1 x Blue metalic ball link M2/2 azul (2 pcs)
1 x Plasti Dip Liquid Tape 429 ml black
1 x Ball link M2,5 (10 pcs)
1 x Profile ABS triangular 4.0x1000 mm 60º
1 x Profile ABS triangular 2.0x1000 mm 90º
1 x 
1 x Profile ABS half cane 2.5x1000 mm
1 x Joint with bearing M2,5 22x5,5
1 x Cable coupler M3 (10 uds)
1 x ABS angle 6,0x6,0x1000 mm
1 x Circlik for shaft 1.2 mm (10 pcs)
1 x Short ball link M2 (6 uds)
1 x Central support Speed 600
1 x Micro control horn (2 pcs)
1 x Silicone black 0,5 qmm wire ( 25 m)
1 x Silicone red 1,0 qmm wire (100 m)
1 x Cable set PREMIUM, SUB-Done 4three fuselage/wing 160 cm
1 x Small aluminium horn red (2pcs)
1 x PPM Encoder Module
1 x 28 mm tailwheel unit
1 x Silicone red 4,0 qmm wire (25 m)
1 x Silicone black 1,0 qmm wire (100 m)
1 x Silicone red 6,0 qmm wire ( 1 m)
1 x Horn DU-BRO 1/2 (2 pcs)
1 x Long horn 50x26
1 x Adapter 3,0 mm M8
1 x A40-10S V2 8-Pole + 6,7:1 PG
1 x Aluminium Hub "Z" for folding Props 30 mm M8 Shaft 5 mm
1 x Socket head ball link M3 (2 uds)
1 x A30-M/L/XL Backmountset complete
1 x M2/M1/6 3Diam short black ball link V1 (2 pcs)
1 x 6 mm hexagonal ball link M3 (10 pcs)
1 x DUPLEX 2.4EX Central Box 220
1 x A50 Backmountset complete V3/V4
1 x Cable servo PREMIUM 1 m (blanco/rojo/negro) AWG21 + AWG26 TPE
1 x Cabel PVC 2 x 0.25 mm2 (5 m) red-black
1 x 3,2x1000 mm 2:1 red termoretract tube
1 x Axi for motor A40-L Motor 8-Pole-Electric Turbine
1 x 1,2x1000 mm 2:1 red termoretract tube
1 x Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x Silicone 0,50 qmm servos wire Futaba (100 m)
1 x 10 mm Quick clamp_L (6 pcs)
1 x 4,8x1000 mm 2:1 red termoretract tube
1 x 6 mm Quick clamp_S (10 pcs)
1 x Adapter 3,2 mm M6
1 x Ball link M3 (10 pcs, flat ball)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Threaded coupler M2,5 Ø 3 mm (10 pcs)
1 x Adapter 3,0 mm M6 for spinner 40 mm fixed propeller
1 x XH 30 cm Female extension 0,25 mm2 silicone cable for 3 cell
1 x M2,5 / 5Diam metal short ball link V3 (2 pcs)
1 x 1,6x1000 mm 2:1 red termoretract tube
27,483.90EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies