258.00EUR

DUPLEX 2.4EX Central Box 210
[JETCB210]


JETI Duplex 2.4EX Central Box 210
Product description and features
The Central Box 210 is the successor to the popular Central Box 200. Especially for the use of powerful and power-hungry servos, the Central Box 210 uses an aluminum housing and avoids the over current protection of the servo slots. The Central Box 210 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.
Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 210 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.
Compatibility with Futaba
The Central Box 210 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.
Switching on and off The switching on and off process of the Central Box 210 is done with the supplied magnetic switch.
Recommended receivers
As receiver e. g. 2 RSat2 or REX3 receivers can be used. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.
Features
Configurable servo outputs
Battery connections 2x MPX connector system
Robust aluminum housing for extra cooling and protection
Firmware upgradeable via JETI USB adapter and JETI Studio
Wireless programming via the device overview of the DC/DS transmitters
Up to 3 independent receiver inputs (R1, R2, E1/R3)
Up to 15 servo slots (suitable for DITEX servo telemetry)
Up to 3 telemetry sensor inputs (E1/R3, E2/15, E3/14)
Input for supplied magnetic switch or optional RC switch
Optional over current protection
The Central Box 210 is not equipped with the built-in overload protection of the servo slots. To protect critical servos such tow coupling servos, retractable landing gears or spoiler servos, the optional overload protection DPSI OCP (Accessories tab) can be used.
Feature
Servo outputs 15
Protected servo outputs (for servos with up to 30kg/cm)
Protected servo outputs (for servos with up to 30kg/cm)
Receiver inputs up to 3
Satellite receiver support Yes
Telemetry Yes
DITEX servo telemetry Yes
Battery inputs 2
Supply voltage [V] 4 up to 8.4
Voltage regulator No
Permanent current [A] 20
Peak current (approx. 2 seconds) [A] 90
Idle current [µA] 180
Operating temperature [°C] ([°F]) -20 to 75 (-4 to 167)
Dimensions [mm] ([in]) 66 x 42 x 18 (2.6 x 1.65 x 0.71)
Weight [g] ([oz]) 59 (2.08)


Reviews
We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Propeller POWER-PROP 13x9 Izda
1 x Propeller POWER-PROP 13x9
2 x Xplorer3 anemometro
1 x Sandwich carbon + poplar 4mm + carbon 480x290 mm
1 x Straightened rod Ø 14.0 mm x 1000 mm
1 x Sandwich carbon + poplar 3mm + carbon 480x290 mm
2 x Pin type hinge Al 3,0x50 mm (2 pcs)
1 x 33 x 8 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Large flex hinge (12 uds)
1 x Flap hinge 33x9 mm (6 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 25 mm reinforced hinge
1 x Gates hinge aluminium (1 pcs)
1 x Miniature brass strap hinge, 1 m
2 x Micro flex hinge (12 uds)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
2 x 48 x 10 mm cylidric hinge Ø 3,0 mm (10 pcs)
2 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x 15 mm reinforced hinge
1 x Pin type hinge Al 4,5x70 mm (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
2 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
2 x Small pinned hinge (12 uds)
1 x Flap hinge (6 pcs)
1 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Gates hinge 30x16 mm (2 pcs)
2 x Long pinned hinge (6 uds)
2 x Gates hinge black 30x16 mm (2 pcs)
1 x 18 mm reinforced hinge
1 x Steel tube (L 1000 mm Ø8 mm, Ø7,7 mm)
1 x CF tube (L 1000 mm Ø0,7 mm, Ø0,3 mm)
1 x Pine wood slat 3.0x7.0x1000 mm
1 x ABS tube 5.0x3.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x Pine wood slat 2.0x10.0x1000 mm
1 x ABS tube 6.0x5.0x1000 mm
1 x ABS tube 3.0x2.0x1000 mm
1 x BALSA trip 10x10x1000 mm
2 x Aluminium tube (L 1000 mm, Ø3.0 mm, Ø2.1 mm)
1 x ABS tube 18.0x16.0x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
1 x Steel tube (L 1000 mm Ø9 mm, Ø8,7 mm)
1 x BALSA trip 8.0x8.0x1000 mm
2 x Beech dowels 2.0 x 1000 mm
1 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
1 x BALSA triangular 8x8x1000 mm
1 x Aluminium tube (L 1000 mm, Ø4.0 mm, Ø3.1 mm)
2 x ABS tube 3.0x1.0x1000 mm
1 x ABS tube 9.0x8.0x1000 mm
1 x BALSA trip 2.0x2.0x1000 mm
2 x Aluminium tube (L 1000 mm, Ø5.0 mm, Ø4.1 mm)
1 x ABS tube 2.0x1.0x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x ABS tube 4.0x2.0x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x ABS tube 7.0x6.0x1000 mm
2 x Walnut wood slat 1.5x1.5x1000 mm
3 x Aluminium tube (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x ABS tube 10.0x8.0x1000 mm
2 x ABS tube 7.0x5.0x1000 mm
1 x ABS tube 12.0x10.0x1000 mm
1 x ABS tube 8.0x7.0x1000 mm
1 x Pine wood slat 6.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø4 mm, Ø3,7 mm)
1 x ABS tube 14.0x10.0x1000 mm
1 x ABS tube 16.0x14.0x1000 mm
1 x BALSA trip 6.0x6.0x1000 mm
1 x Steel tube (L 1000 mm Ø6 mm, Ø5,7 mm)
1 x CF tube set (Ø 38 mm y Ø 14 mm)
2 x ABS tube 5.0x4.0x1000 mm
2 x Carbon tube (L 1000 mm, Ø1.5 mm, Ø0.7 mm)
1 x Pine wood slat 5.0x5.0x1000 mm
1 x ABS tube 3.0x2.0x330 mm
2 x BALSA trip 5.0x5.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
2 x Liston HAYA 8 x 8 x 1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Pine wood slat 3.0x5.0x1000 mm
1 x Linden wood slat 3.0x3.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
2 x ABS tube 6.0x4.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Steel tube (L 1000 mm Ø5 mm, Ø4,7 mm)
1 x Control horn long w/ball
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x 43 x 10 mm cylidric hinge Ø 2,5 mm (10 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x PowerBox PIONEER incl. microSwitch
1 x Support pumb/filter Xicoy X45
1 x Support Flush MPX Conector (6 pcs)
1 x Tapa estado carga XT-60 (6 pcs)
1 x Support XT60 conector (2 pcs)
1 x Soporte filtro FESTO (4 pcs)
1 x Epoxy L 40 min. (1 Kg) 715g Resina / 285g Hardener S (15 min)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
3 x Xplorer1 anemometro
1 x Pegamento Pu R 50g polyuretano
1 x Hardener EPIKURE™ Curing Agent MGS™ LH285, bottle/ 800 g
1 x resin-hardener package L-385 with hardener H-385 (3.5 Kg)
1 x Straightened rod Ø 8.0 mm x 1000 mm
1 x Straightened rod Ø 5.5 mm x 1000 mm
1 x Straightened rod Ø 0.5 mm x 1000 mm
1 x Towing hook
1 x Epoxy Resin L 285 + Hardener 386, kit/ 3.355 kg
1 x UHU hart 35 g
1 x Glass Bubbles (0.12g) 400 G (aproxx 3.3 l)
1 x Cotton Flocks, bag/ 500 g
1 x White gelcoat 1 Kg
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Hardener P-25, canister 2.5Kg
1 x LASER 73" 1.85m (05) PILOT
1 x BALSA triangular 6x6x1000 mm
1 x Walnut wood slat 2.0x2.0x1000 mm
1 x A/C quality beech plywood 600x300x6.0 mm
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø36 mm)
1 x Carbon tube 3K-PW (L 2000 mm, Ø14 mm, Ø12 mm)
1 x Balsa panel 2.5x100x1000 mm
1 x Pine wood slat 2.0x2.0x1000 mm
1 x Carbon tube (L 1000 mm, Ø14 mm, Ø12 mm)
1 x Servo-V-Limiter 5.2V
1 x PowerBox DigiSwitch V2 MPX/JR
1 x DPSI Micro - DualBat 5.9V / 7.2V JR-JR (Dual Power Supply)
1 x DPSI Micro SingleBat 5.9V/7.2V magnetic switch
1 x Tape GFK 25 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x Straightened rod Ø 5.0 mm x 1000 mm
1 x Brass hexagonal rod Ø 3 mm x 1000 mm
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x Brass hexagonal rod Ø 5 mm x 1000 mm
1 x Foil for sticking flaps and ailerons
1 x Spikes Band (5 m)
1 x SE Ring 250 mm (2 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x Tape GFK 50 mm
1 x SE Ring 300 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x Ring 320 mm length (5 pcs)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x 5 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 200 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 330 mm (4 pcs)
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Pad self adhesive, up to 3mm / 0.12″, (10 pcs)
1 x AXI 2808/20 V2 Long
1 x Xplorer4 anemometro
1 x 1000 cc gasoline fuel tank complet
1 x 1/10 Pilot "Jimmy"
1 x Carbon tube 3K-PW (L 2000 mm, Ø40 mm, Ø37 mm)
1 x Hard brass tubing (L 1000 mm, Ø18.0 mm, Ø16.0 mm)
1 x External LED's (2 pcs)
1 x DPSI Micro - RCS RV
1 x Emcotec SPS Magnetic Switch Actuator
1 x Fuel Dot (RED)
1 x DPSI Micro SingleBat 5.9V/7.2V F3A Edition magnetic switch
1 x Fueling valve "Air"
1 x DPSI RV Mini 6 Magic
1 x DPSI Micro-DualBat 5.9V / 7.2V MPX-JR
1 x DPSI RV Mini 6 (2008)
1 x Soporte grifo FESTO (2 pcs)
1 x Tube support Ø 6mm (10 pcs)
1 x Support Antena 2.4 Ghz (2 pcs)
1 x Pasacables rectangular 40x15 mm (4 pcs)
1 x PH6 adapter for 6mm M10 AXI for AXI41xx
1 x AXI 2212/26 V2
1 x AXI 2808/24 V2
1 x Thixotropic agent TM 100, tin/ 415 g (approx. 5 l)
1 x Extension silicon 10 cm (Futaba)
1 x 9x4.7 * 22x12 carbon propeller
1 x DPSI magnetic switch actuator (PCB)
1 x 160 mm carbon undercarriage (2pcs)
1 x 
1 x 1/6 Pilot "Garry"
1 x Pilatus PC-21 50E RED/WHITE (SebArt)
1 x 110x55 mm C SLH KOVO wheel
1 x Ciano KAVAN Super Thin 20g
1 x 2,3 mm Prop Adapter M6
1 x Debonder CA 20g
1 x 3,2 mm Prop Adapter M6
1 x 3,2 mm Prop Adapter M8
1 x Propeller Pleg CAM-Prop 8x6
1 x Carbon/kevlar tube 3K-PW (L 1500 mm, Ø25 mm, Ø22.5 mm)
1 x Hard brass tubing (L 1000 mm, Ø7.0 mm, Ø6.1 mm)
1 x Hard brass tubing (L 1000 mm, Ø6.0 mm, Ø5.2 mm)
1 x Carbon tube 3K-PW (L 1000 mm, Ø30 mm, Ø26 mm)
1 x Steel tube (L 1000 mm Ø10 mm, Ø9,7 mm)
1 x 2 piece mounting frame
1 x BlueCom™ Adapter (Android / WP)
1 x USB Interface Adapter
1 x PowerBox DigiSwitch V2 JR/JR
1 x 2 piece mounting frame Battery 3200 / 4000
5,456.98EUR
Manufacturers
Manufacturer Info
Jeti
Jeti Homepage
Other products
Languages
Español English
Currencies