Top » Catalog » Hardware » Power supply system/Data Recordi » Jeti » JETCB3202+

534.01EUR

DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
[JETCB3202+]

JETI DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch

Product description and features
The Central Box 320 is designed for a complete management of multiple servos and two receiver batteries for a model with high security requirements.The Central Box 320 has an overload protection on each servo output, 8 channels for high-performance servos up to 60 kg / cm and 10 channels for standard servos up to 30 kg / cm. Especially for the use of powerful and power-hungry servos, the Central Box 320 has an aluminum housing for better cooling. The Central Box 320 offers true battery redundancy, DITEX servo telemetry, JETI EX telemetry and up to three receiver inputs (2x 2.4GHz and 1x 900MHz) for full power and RF signal redundancy.

Configuration via JETI Duplex DS/DC transmitters
With JETI Duplex DC/DS transmitters, the full potential of the Central Box 320 can be fully exploited. The device overview of the JETI Duplex DS/DC transmitter makes it easy to perform the entire configuration of the servo outputs, DITEX servo and JETI EX telemetry, function assignment, and more.

Compatibility with Futaba
The Central Box 320 can also be used with two S.Bus receivers (e .g Futaba R7003SB). Setting up and reading out the telemetry values must, however, be realized with a separatly available JETIBOX.

Switching on and off
The switching on and off process of the Central Box 320 is done with the supplied R/C switch.

Recommended receivers
Two compatible RSat2 receivers are included. Optionally, the use of a REX Assist receiver in combination with a RSat2 receiver is possible, so you get a Central Box with gyro stabilization.

Features
Adjustable powerful BEC for voltage stabilization (connection of standard or HV servos)
DITEX servo telemetry support
Possibility to connect up to 3 receivers with serial communication
built-in Expander function with the possibility of independent connection of up to four JETI EX sensors
Input for magnetic switch or RC switch
Power supply batteries connected via MPX connector
100Hz mode of servo outputs (10ms period)
EX telemetry support (measurement of voltage, current, capacity, temperature, etc.)
Easy settings changes via DC/DS transmitter („Device explorer“)
Robust metal construction with mounting holes

temporarily out of stock

Reviews

Categories

* OFFER MONTH *
Planes->
Sailplanes->
Autogyros->
Helicopters->
UAVs - RPAs->
Multicopters->
Hardware->

  3D IMPRESION
  ABS Rods-Strips
  ABS/GFK/CFK plate
  Actuator
  Adapters->
  Adhesives/Resin/Epoxy->
  Altimeters->
  Amperimeters
  Anemometer
  Auto-Pilot
  Bags/Covers
  Batteries->
  BEC/Cables/Conectors/Interruptor
  Bungee Launchers
  Cables
  Cameras->
  Carbon rod
  Carbon/Brass/Steel/ABS/Aluminium
  Catalogues
  Chargers->
  Clevis
  Combustible->
  Connectors
  Control horns
  Controlers->
  Coverings/Thermoretrac
  Decals
  Extension
  Extinguisher
  Ferritas
  Glasses
  Hardware
  Hinges
  Instruments / Panels
  Lights/Ilumination->
  Linkages
  Merchandising
  Motor
  Pilots
  Pinion extractor
  Power supply system/Data Recordi->
    Bavarian Demon
    Dymond
    Eagle Tree
    Emcotec
    Futaba
    Jeti
    PowerBoxSystems
    ROI IMPORT
    SebART
    Setlo
  Profiles
  Propelers->
  Screws
  Servos->
  Simulators
  Smoke/Rocketry/Fireworks
  Spinners->
  Spray/Painting/Dope/Solder Paste
  Steel/brass Rod/Aluminium
  Support/CG/Incidenc.
  Tapes/Closed/Bridles
  Tools
  Towing
  Transmitters/Receivers->
  Undercarriage->
  Wheels & Axles->
  Wing Joiner
  Wood
Car/Trucks->
Motors & Turbines->
Gas. Motor Paramotors
Acces. for Motors->
Paragliders/Parachutes/Windsock
Boats/Naval units->
FPV->
Robots->
CNC cut
Roof BOX
Crash kits
Outlet Zone->
Used
Merchandising HA

What's New?

DUPLEX case for Jeti DS handheld transmitter
54.00EUR

Information

Shipping & Returns
Privacy Notice
Conditions of Use
Financing
Point Program FAQ
Contact Us

We Accept

Quick Find

Shopping Cart

1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 50 m
2 x	Breatex™ Non-woven absorber 300 g/m² Roll 41 m
2 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 10 m
1 x	ABS 500 x 400 x 2,0 mm (white)
1 x	ABS 500 x 400 x 1,5 mm (white)
1 x	ABS 500 x 400 x 0,5 mm (white)
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 50m
1 x	Carbon fibre sandwich sheet 350x150x3 mm
1 x	Buy Perforated film 100 cm / 10 m
1 x	Buy Perforated film 100 cm / 50 m
2 x	Aluminium sheet 500x250x0,5mm
1 x	Buy Perforated film 145 cm / 50 m
1 x	Carbon fibre tape 200 g/m² (unidirectional) 50 mm
2 x	Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
2 x	Breatex™ Non-woven absorber 150 g/m² Roll 100m
1 x	Breatex™ Non-woven absorber 150 g/m² Roll 20m
1 x	Carbon fibre sleeve 12k 170 mm x 5m
1 x	Silicone 0,25 qmm servos wire Graupner (5 m)
2 x	Copier 2x20 cm pcs
1 x	White silicone 0,25 qmm wire (100 m)
1 x	Silicone 0,14 qmm servos wire Graupner (5 m)
2 x	Copier 5x20 cm pcs
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 120 GRIT (5 pcs)
1 x	2,5x60 mm allen screwdriver
1 x	5 line servos wire black (1 m)
1 x	PVC 0,35 qmm servos wire Graupner (100 m)
2 x	Screwdriver for Torx® TX6
1 x	Cable servo PREMIUM MAXI 200m (blanco/rojo/azul) PVC
1 x	Screwdriver for Hexagon 1,27mm
1 x	Black silicone 0,25 mm² wire (25 m)
1 x	Starter Sullivan-STAR 601
1 x	Silicone 0,14 qmm servos wire Graupner (100 m)
2 x	Vacuum pump P1-N
1 x	Cable servo PREMIUM MAXI 100m (blanco/rojo/azul) PVC
1 x	Cut tube
1 x	Silicone 0,50 qmm servos wire Graupner(100 m)
1 x	White silicone 0,25 qmm wire (150 m)
1 x	Z Bender - S Type Tool
1 x	50m servo "Premium" wire (white/red/blue)
1 x	10m servo "Premium" wire (white/red/blue)
1 x	Dust collector for mould cleaning
1 x	Starter EM Gear Power 250
1 x	Cable servo PREMIUM MAXI 50m (blanco/rojo/azul) PVC
1 x	Z Bender - S Type Tool
1 x	Cabel PVC 2 x 0.25 mm2 (5 m) red-black
2 x	PROXXON - SANDING BELTS FOR BSL 220/E 180 GRIT (5 pcs)
1 x	Screwdriver for Hexagon 1,5mm
1 x	Ball Link Plier
1 x	Crimping tool
1 x	3,0x60 mm allen screwdriver
1 x	Starter EM Gear Power 80
1 x	Foam plastic plates (310x210x8 mm)
1 x	Fiberglass plate 350x150x0.3 mm
1 x	Chopped glass fibre strands 3 mm
1 x	Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x	PVC grid diagonal 290x185x0.32 mm
1 x	Foam plastic plates (310x210x2 mm)
1 x	Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x	Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 50M
1 x	Glass fabric 25 g/m² (1 m²)
1 x	Film release agent PVA 25 ml
1 x	Carbon roving DowAksa / 24k / 1600 tex
1 x	Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x	Glass fibre sleeve Ø 20 mm
1 x	Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x	Glass fabric 25 g (2 m²)
1 x	Demoulding wedge red (40 x 20 mm) 5 pcs
1 x	Styrene plate 320x120x1.0 mm
1 x	Fiberglass plate 350x150x1.0 mm
2 x	Cap Hispano Aviación
1 x	Shirt Hispano Aviación
2 x	Hard aluminium thin-walled tube with fibreglass case ø30x1mm, 1m
1 x	Wing-connector: Glass / Carbon tube (13.7/12.5) x 1000 mm
1 x	Pine wood slat 5.0x5.0x1000 mm
1 x	25 mm reinforced hinge
2 x	Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
1 x	Conector BEC female (10 pcs)
1 x	M2 5Diam short black ball link V2 (2 pcs)
1 x	Profile ABS Square 3 x 1000 mm
1 x	Oracover Azul 2 m
1 x	Oracover Black 10 m
1 x	3,2x1000 mm 2:1 red termoretract tube
1 x	Green smoke canister 100 g
1 x	Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x	Tapa estado carga XT-60 (6 pcs)
1 x	Pasacables rectangular 40x15 mm (4 pcs)
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x	Goma arrancador Ø36 mm x 30 mm
1 x	Propeller diller for DLE111 and DA85-150
1 x	Cable set PREMIUM , fuselage/wing one4one
1 x	Blue silicone 0,5 qmm wire (50 m)
1 x	Transparent spiral protective cover for wires Ø 0,5/50 mm - 25 m
2 x	Heat Seal Iron
1 x	Welder 100W/200V
1 x	XH 30 cm Male extension 0,25 mm2 silicone cable for 5 cell
1 x	Silicon red 1,0 qmm cable ( 25 m)
1 x	Silicon black 2,5 qmm cable ( 25 m)
1 x	10 mm Quick clamp_L (6 pcs)
1 x	PROXXON - SANDING BELTS FOR BSL 220/E 80 GRIT (5 pcs)
1 x	XH 30 cm Female extension 0,25 mm2 silicone cable for 5 cell
1 x	Silicone black 6,0 qmm wire (25 m)
1 x	Spare round blades, 28 mm, pack/ 2 pcs.
1 x	Propeller diller for DA50, DLE55 red
2 x	Soldering tip for KAVAN soldering iron KAV66.8338
1 x	Propeller diller for DLE170
1 x	EC-Cutter
1 x	Fresa corte diamante Ø 1.0mm (bola)
1 x	Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x	DUPLEX 2.4EX Central Box 320 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Central Box 220 + 2x Rsat2 + RC Switch
1 x	DUPLEX 2.4EX Central Box 210
1 x	Cable servo PREMIUM MAXI 10m (blanco/rojo/azul) PVC
1 x	A/C quality beech plywood 600x300x0.8 mm
1 x	A/C quality beech plywood 600x300x0.6 mm
1 x	A/C quality beech plywood 1520x750x3.0 mm
1 x	A/C economy plywood 600x300x6+.0 mm
1 x	A/C quality beech plywood BIRCH 600x300x1.0 mm
1 x	A/C quality beech plywood 600x300x5.0 mm
1 x	Balsa panel 6.0x100x1000 mm
1 x	Carbon Fiber TeXtreme® 80 g/m² (plain) 100 cm, roll/ 10 m
1 x	Glass fabric 280 g/m² (twill weave) 100 cm, roll 50 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x	Balsa panel 2.5x100x1000 mm
1 x	BALSA trip 8.0x8.0x1000 mm
1 x	Beech dowels 10 mm x 1000 mm
1 x	BALSA trip 3.0x3.0x1000 mm
1 x	Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 22 roll
1 x	Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x	Carbon Non-crimp ST 200 g/m² 50 cm x 20 m
1 x	Carbon Non-Woven, 160 g/m² 100 cm 10 m
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x	Vest clothes Hispano Aviación
1 x	Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x	3,2 mm Prop Adapter M6
1 x	SCHARNHORST accessories
1 x	Carbon plate 700x550x0.5 mm
1 x	Aluminum Bayonet / strongal D25 mm / 1 m
1 x	3 mm Long Prop Adapter M5
1 x	5 mm Prop Adapter M6
1 x	Adapter 5,0 mm M6 for spinner 40 mm fixed propeller
1 x	Allen wheel collar M4x6
1 x	10 mm dogdrive props
1 x	Adapter 3,2 mm M8
1 x	Press fitting for 1,0 diam. steel cable (10 pcs)
1 x	Propeller APC 11x3.8 SF
1 x	Propeller APC 11x5.5 Electric Pusher
1 x	Propeller FIALA 15x8 3-Blade
1 x	Propeller APC 10x7 Electric
1 x
1 x	6 mm Prop Adapter M8
1 x	Adapter 5,0 mm M8
1 x	Adapter 3,2 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 3,0 mm M8
1 x	Allen wheel collar M4x4
1 x	Aluminium coupler M3/2 with ball bearing (1 pcs)
1 x	Aluminium alloy coupler for carbon tube 6/M4
1 x	Adapter 4,0 mm M6
1 x	Adapter 2,3 mm M5 for spinner 30 mm fixed propeller
1 x	Adapter 3,2 mm M6
1 x
1 x	Aluminun wheel collar 2 mm Ø (4 uds)
1 x	3,2 mm Prop Adapter M5
1 x	12 mm dogdrive props
1 x	Aluminium coupler M2/2 with ball bearing (1 pcs)
1 x	Allen wheel collar M3x3
1 x	Adapter 3,0 mm M6
1 x	Propeller APC 10x6 Electric
1 x	Propeller APC 10x10 Electric
1 x	Propeller APC 10x3,8 SF Electric Pusher
1 x	Propeller APC 13x8 Electric
1 x	FIALA Propeller 23x8 Electric
1 x	Propeller APC 12x10 Electric
1 x	Propeller APC 11x7 SF
1 x	Propeller APC 12x6 SF
1 x	Propeller APC 10x5.5 MR Electric multirrotor PUSHER
1 x	Propeller APC 10x4.7 SF
1 x	Propeller APC 11x4.7 SF
1 x	Motor ORBIT 20-12 with coolingfan
1 x	AXI 2217/20 V2 Long "F5J"
1 x	AXI 2217/16 V2 Long
1 x	AXI 2826/8 V2 Long
1 x	Turbine HORNET 85 SE
1 x	Turbine RHINO 200 SE 20.4 Kg
1 x	22 mm Cut Disc Proxxon/Dremmel
1 x	Sealing Iron Sleeve PROF
1 x	Tachometer HANGAR 9 digital
1 x	Electric Landing Gear FELIX SporJet 2.200mm
1 x	XT-60 Plug Mold
1 x	Hot Glue Stick GREEN
1 x	VIPER SL Gold PNP 2270 mm
1 x	Motor Advance 50-6
1 x	Motor Advance 30-10 F3A
1 x	Motor A60-6XS V4 28-pole kv370
1 x	A40 Backmountset complete
1 x	AXI 2814/20 V2
1 x	AXI 2814/12 V2
1 x	Axle for motor A50-L
1 x	AXI 2814/16 V2
1 x	AXI 2814/6D V2
1 x	A60-6XS V4 28-Pole
1 x	Motor A20-20 L EVO
1 x	Motor A200-8
1 x	A40-10S V2 8-Pole + 6,7:1 PG
1 x	Motor A200-6
1 x	Combo RAY C3542-1000 + ESC 60A
1 x	Turbina DRAGON 30 Kg
1 x	ULTIMATUM 2.0 m white
1 x	Combo FOXY C3530-700 + FOXY 80 amp
1 x	Turbo Prop KS
1 x	PowerBox VRegulador 6.0v
1 x	290 mm M4/M4 6.0x4.0 mm shaft ship
1 x	BULL MØ1 2.600mm (mono color)
1 x	Fresa corte diamante Ø 2.35mm (lentil)
1 x	Dean-T Plug Mold
1 x	Screwdriver for Torx® TX8
1 x	BULL MØ1 2.600mm "RED BULL"
2 x	Sealing Iron Sleeve STD
1 x	Digital precision scale up to 2000 g
1 x	BD-5J PNP
1 x	Universal Filter
1 x	Fabric scissors curved Premium, 16 cm / 6" length
1 x	Fresa corte diamante Ø 1.4mm (bola)
1 x	55% silver electrodes (2 pcs)
1 x
1 x	Dremel 3000 130W
1 x	FELIX SportJet Red/Yellow 2200 mm
1 x	Pistola termica MH 550 micro
1 x	MPX plug mold V1
1 x	Fabric scissors curved (offset handles), 16 cm / 6" length
1 x	BULL MØ1 2.600mm "McLAREN-GULF"
1 x	PC-21 2.880 mm SINGAPUR scheme
1 x	Carbon plate 350x150x1.0 mm

56,733.82EUR