57.90EUR 39.90EUR

Glases Nimbus
[CMNIMBUS]



Set de gafas, cristales y trapo

Funda (inclu�da) para guardar todo
The Nimbus polarised set represents our top-of-the-range frame. Nimbus sunglasses have been specifically designed and manufactured for radio controlled modellers, with interchangeable lenses for different light conditions - with the Category 0 yellow lenses fitted, you can even enjoy the benefits of light enhancement on a cloudy day.

Polarised sunglasses greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

Other manufacturers of interchangeables rarely offer polarised lenses as standard - they certainly don't give you TWO sets for your money! For that reason, we believe our Nimbus glasses are some of the best value sports sunglasses on the market for ANY sport.

Featuring 100% UVA / UVB protection, these polycarbonate glasses benefit from an especially high-quality, wrap-around frame design that blocks unwanted and annoying light and wind from the sides. The scratch-resistant lenses are de-centred, which negates the possibility of distortion caused by the lens curvature. Conforming to US ANSI Z80.3 and British and European safety standard EN1836, our sunglasses are subjected to a drop-test at the factory, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the renowned European Union 'CE' compliance mark.

The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2), polarised, average sunlight; (category 3) polarised, bright sunlight; dark smoked (category 4), very bright conditions.

All glasses come with 4 x sets of lenses as standard, a cleaning cloth and a carry case with belt clip and internal compartments for housing the extra lenses. Our latest stock also includes a neck / head strap.


enought units
enought units

Reviews

Customers who bought this product also purchased
Metal clevis M2 (10 uds)
Metal clevis M2 (10 uds)

enought units
enought units

Connectors banna oro 2 mm (M/F)
Connectors banna oro 2 mm (M/F)

enought units
enought units

Servo HITEC HS-55
Servo HITEC HS-55

enought units
enought units

500 ccm complete gasoline fuel tank
500 ccm complete gasoline fuel tank

enought units
enought units

Blind nut M5 (4 pcs)
Blind nut M5 (4 pcs)

enought units
enought units

Threaded coupler M2 (10 uds)
Threaded coupler M2 (10 uds)

enought units
enought units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
2 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 3m
1 x Carbon fabric 160 g/m² (plain weave) 100 cm x 3 m
2 x Glases Nimbus
1 x Glass fabric tape 130 g/m² (Silane, plain) 25 mm / 100M
2 x Zurich Sport Sunglasse Dark Sensity MAGENTA Glasses
3 x Carbon fabric 160 g/m² (twill weave) 127 cm, roll/ 10 m
3 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Glases Stratus
2 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 100 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 5m
1 x Carbon fibre sleeve 12k 170 mm x 5m
1 x Fibra carbono tela 160g/m2 100 cm x 2 m (twill weave)
2 x Glass fabric tape 225 g/m² (Silane, plain) 40 mm X 100m
1 x Fibra carbono 3k tela 160g/m2 100 cm x 5m
1 x Carbon fabric 200 g/m² (Aero, plain weave) 100 cm x 5m
1 x Carbon Non-Woven, 160 g/m² 100 cm 25 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 20 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x4.0 mm (5 pcs)
1 x Glass fabric tape 225 g/m² (Silane, plain) 30 mm X 100m
1 x TeXtreme® Carbon tape 38 g/m² (IM, unidirectional) 20 mm x 100m
1 x Carbon fibre tape 125 g/m², 3k, UD (25 mm) roll/ 10 m
1 x Carbon fibre tape 125 g/m², 3k, UD (50 mm) roll/ 50 m
1 x Carbon Non-Woven, 160 g/m² 127 cm 1 m
1 x Carbon Fabric Prepreg 200 g/m² (twill 2/2) 100 cm, roll/ 1 m
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x2.0 mm (10 pcs)
2 x Glases Flitemaster
3 x Glases Moritz
1 x Truck-trailer for gliders 720 x 239 mm
1 x WingFix ULTRA Black Edition
2 x Field folding model stand
1 x Propeller balancer
2 x Pin type hinge Al 4,5x70 mm demount (2 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
3 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Flap hinge 33x9 mm (6 pcs)
1 x Cylidric hinge 33 mm Ø 2 mm (5 pcs)
1 x Micro flex hinge (12 uds)
2 x 18 mm reinforced hinge
1 x Gates hinge aluminium (1 pcs)
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Nylon hinge 15x0,3 (10 pcs)
1 x 15 mm reinforced hinge
1 x Gates hinge
2 x Gates hinge black 30x16 mm (2 pcs)
3 x Gates hinge 30x16 mm (2 pcs)
1 x Fast'n EZ-CA-Hinge (12 uds)
2 x Long pinned hinge (6 uds)
3 x Nylon hinge for flaps/gates 27x10,5 (2 pcs)
1 x Silicone black 6,0 qmm wire ( 1 m)
1 x Set cintas unión paracaídas 145 cm
1 x U Profile ABS 8,0x4,0x1000 mm
2 x Styrene plate 320x120x1.0 mm
2 x Thermoforming sheet 0.1mm (0.004in) DIN A5 (5 pcs)
2 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (10 pcs)
2 x Glases Ace
1 x Carbon fibre tape 200 g/m² (unidirectional) 50 mm
1 x Breatex™ Non-woven absorber 150 g/m² Roll 5 m
1 x Carbon fibre sandwich sheet 350x150x3 mm
1 x AIREX® Sheets C 70.55 (YELLOW) 1200x550x1.2 mm (5 pcs)
2 x Chopped glass fibre strands 3 mm
2 x Fiberglass plate 350x150x1.0 mm
2 x Fiberglass plate 350x150x1.5 mm
2 x Styrene plate 320x120x0.5 mm
3 x Film release agent PVA 25 ml
1 x Small pinned hinge (12 uds)
1 x Robart Door Hinge (Pk2)
1 x 48 mm cylidric hinge Ø 2,5 mm (5 pcs)
1 x Angle measurer
1 x Pin type hinge Al 4,5x70 mm to wire (2 pcs)
1 x Long pinned hinge (12 uds)
1 x Nylon hinge 20x15x0,3 (10 pcs)
1 x 67 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x Large flex hinge (12 uds)
1 x Unmounted aluminium pin 6x98 mm (2 pcs)
2 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Cylidric hinge 43 mm Ø 2,5 mm (5 pcs)
1 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
3 x Demoulding wedge red (40 x 20 mm) 5 pcs
1 x Vacuum bag, 1200 mm x 50 m
1 x Glases Innovation Plus
1 x Vacuum sealing tape, 2.5 x 12 mm (up to 140 °C) 15 m
1 x Screw M3x16
1 x Head runner
1 x Compact Pitts Muffler OS MAX.35.40 FP
1 x Carbon fiber flat 1000x6.0x0.8 mm
1 x Carbon fabric 245 g/m² (twill weave) 127 cm, roll/ 10 m
1 x Buy Perforated film 100 cm / 10 m
1 x Blade holder upper
1 x Foam plastic plates (310x210x2 mm)
1 x Glass fabric 80 g/m² (FK 144, twill weave) 100 cm, pack/ 1 m
1 x ABS 500 x 400 x 1 mm (white)
2 x Breatex™ Non-woven absorber 300 g/m² Roll 41 m
1 x Glass fabric 25 g (2 m²)
1 x RUDDOG Protection and Heat Shield Tape (2mx50mm)
1 x Cable-Tie 1.66x71mm / 0.07x2.8″ (20 pcs)
1 x SE Ring 450 mm (2 pcs)
1 x 13 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x Glases Nimbus "Black"
1 x Tape GFK 38 mm
1 x ABS 500 x 400 x 0,5 mm (white)
1 x PVC plate 320 x 194 x 0.23 mm (brown)
1 x Aluminium sheet 500x250x0,5mm
1 x Glass fabric 25 g/m² (1 m²)
1 x ABS 500 x 400 x 1,5 mm (white)
1 x Thermoforming sheet 0.5mm (0.02in) DIN A4
1 x Sheet Depron Aero 1250x800x3 mm
1 x PVC grid straight 290x185x0.32 mm
1 x Vest clothes Hispano Aviación
1 x Chopped glass fibre strands 3 mm
1 x Foam plastic plates (310x210x3 mm)
1 x PVC grid diagonal 290x185x0.32 mm
1 x Shirt Hispano Aviación
1 x Glass fabric 49 g/m² (Finish FE 800, plain) 110 cm x 1m
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
2 x Carbon roving DowAksa / 24k / 1600 tex
2 x Thermoforming sheet 0.3mm (0.039in) DIN A4
1 x Glass fibre sleeve Ø 20 mm X 10m
1 x Junta selladora, Tacky Tape Gris 2.75mmx12mmx15m
1 x Glases Aspen
1 x 20x1000 mm Ring Strap Back To Back
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x SE Ring 300 mm (2 pcs)
1 x 14x60 mm Mini rings Tie Wraps (4 pcs)
1 x SE Ring 200 mm (2 pcs)
1 x Marker ties (20 pcs)
1 x Ring 320 mm length (5 pcs)
1 x Tape GFK 50 mm
1 x SE Ring HACKER 300 mm (2 pcs)
1 x SE Ring 250 mm (2 pcs)
1 x 26 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x 13 mm self adhesive Pinking Tape, saw tooth height 1.0 mm
1 x SE Ring 400 mm (2 pcs)
1 x Foil for sticking flaps and ailerons
1 x SE Ring 360 mm (2 pcs)
1 x Spikes Band (5 m)
1 x Motor OS 3805-1200 electric
1 x Motor OS FS 75 AX
1 x Motor OS 3820-1200 electric
1 x ARTIST 1.560 mm
1 x 57 mm micro-mini servo cover
1 x Albatros ,spare cockpit (Top Model)
1 x Motor MVVS 2.0/1120
1 x Motor Advance 50-6
1 x 30 cm BEC cable (male)
1 x Cabel charger transmitter GRAUPNER
1 x 58 mm micro servo cover
1 x 13 mm wing servo holder
1 x 20 mm tail wheel for 0,5-1 Kg models
1 x Motor OS MAX 120 AX
1 x Fiberglass plate 620x540x0,3 mm
1 x Spring Clip Ø25 mm
1 x Spring clamp for tube Ø29 mm ext 1pc
1 x Glass fibre sleeve Ø 20 mm
1 x Latex Gloves GRIP, size L, box/ 100 pcs
1 x Cotton Flocks, bag/ 500 g
1 x Pin hinge 34x16 mm (10 uds)
1 x Pin hinge 39x20 mm (10 uds)
1 x Fiberglass plate 350x150x0.3 mm
1 x Carbon plate 350x150x0.5 mm
1 x Carbon plate 350x150x2.5 mm
1 x Exhaust elbow for SAITO FA65/72/80/82a/91S/100/
1 x Giant Scale Muffler D.A. 70
1 x Pitts Muffler kit for CAP 21
1 x Junta humo metalica G20 (DLE20/DLE20RA/DLE40)
1 x Junta humo metalica G55 (DLE55/DLE111/DLE222)
1 x O-ring Saito FG-73 5cyl
1 x Junta humo metalica G85 (DLE85/DLE170)
1 x Epoxy 5 min. 500 g (Resin)
9,757.81EUR
Manufacturers
Languages
Español English
Currencies