59.00EUR

Glases Innovation Plus
[CMINNOVATIONP]



Set de gafas, cristales, funda y trapo
Do you have to wear prescription glasses? Fed up with seeing your buddies turn up at the field with great looking and practical glasses you just can't wear? We have the answer in the form of these stylish prescription model flying sunglasses, which have been especially developed for radio control model use.

At the heart of the design is a polycarbonate frame that houses your prescription lenses; this clips onto a main frame, which in turn houses the coloured shades that simply clip on to a hinged section. These hinges allow you to temporarily turn up the outer lenses in order to closely inspect a model in the pits etc.

Innovation Plus are polarised sunglasses. The polarised cristals greatly reduce glare, which is an effect caused by light hitting horizontally flat surfaces. Polarised lenses filter out this light to greatly enhance your visibility.

The de-centred, scratch resistant lenses have been optically balanced to negate the effects their curvature would otherwise have on your vision. Conforming to US ANSI Z80.3 plus British and European safety standard EN1836, our sunglasses are factory impact-tested, and offer great protection against flying debris should you suffer a mishap. All of our glasses carry the CE (European Union standard) compliance mark. The interchangeable lenses are: yellow (category 1) low light - these actually enhance light and contrast; beige (category 2) average sunlight; smoked mirror (category 3) bright sunlight; dark smoked (category 4), very bright conditions.

The glasses come with the interchangeable lenses, a cleaning cloth and a superb carry case with belt clip. All frames and the carry case display our 'Model Glasses' logo.

WILL THEY WORK FOR ME? - If you have a prescription (SPH) requirement that's less than plus or minus 4.00, our glasses will work just fine for you. Stronger prescriptions can cause distortion, due to the curvature of the tinted lenses when placed in front of the flat prescription clip. The de-centring calibration loses its effect where stronger prescriptions are required. If you have a requirement greater than plus or minus 4, please do not buy these glasses. Bi-focals, varifocals and prismatic lenses can be added - if in doubt, please consult your optician for advice.

IMPORTANT NOTE
When wearing Innovation Plus, some users may find they cannot see certain types of LCD or other electronic / digital transmitter displays. This is a normal cause of wearing polarised glasses. We recommend using the glasses with the front section flipped up, or the glasses removed, when model trimming prior to use.


few units
few units

Reviews

Customers who bought this product also purchased
Fiberglass plate 350x150x0.5 mm
Fiberglass plate 350x150x0.5 mm

few units
few units

Tape GFK 50 mm
Tape GFK 50 mm

few units
few units

Tape GFK 25 mm
Tape GFK 25 mm

few units
few units

MAX BEC
MAX BEC

few units
few units

Conector FUTABA Servo female BLUE silicon (10 pcs)
Conector FUTABA Servo female BLUE silicon (10 pcs)

few units
few units

Connectors DEANS (T)
Connectors DEANS (T)

few units
few units

We Accept
Quick Find
 
Use keywords to find the product you are looking for.
Advanced Search
3 x 1,5x50 mm allen screwdriver
1 x Digital precision scale up to 2000 g
1 x Concave-Convex sandpaper file 13 mm
1 x EC-Cutter
1 x 
1 x Fresa corte diamante Ø 1.0mm (bola)
2 x 2,0x50 mm allen screwdriver
1 x Dust collector for mould cleaning
1 x Digital weight, angle and balance meter BASIC
1 x Digital scale up to 40 kg
1 x Dremel 3000 130W
1 x Fresa corte diamante Ø 2.35mm (flame)
1 x Cut tube
1 x Fresa corte diamante Ø 1.4mm (bola)
2 x 22 mm Cut Disc Proxxon/Dremmel
1 x 100g Flux Paste for Silver Solder
1 x Dremel PERMAGRIT thin lime
1 x Fabric scissors curved Premium, 16 cm / 6" length
1 x Ball Link Plier
1 x Dremel PERMAGRIT 18 mm round lime
1 x DYNAMOMETER S-1580
2 x 76 x 12 mm cylidric hinge Ø 4,5 mm (10 pcs)
1 x 67 mm cylidric hinge Ø 5 mm (4 pcs)
1 x 67 mm cylidric hinge Ø 4,5 mm (5 pcs)
1 x Pin type hinge Al 3,0x50 mm demount (2 pcs)
1 x 18 mm reinforced hinge
1 x Gates hinge
1 x Micro flex hinge (12 uds)
1 x Large flex hinge (12 uds)
1 x Connectors banna oro 4 mm (M/F)
1 x Connectors banna oro 2 mm (M/F) (ultralight)
1 x Glases Nimbus "Black"
2 x Glases Innovation Plus
1 x XH female balance (4S) connector (2 pcs)
1 x Connectors DEANS (T)
2 x XH male balance (2S) connector (2 pcs)
3 x Conector BEC male (10 pcs)
1 x Connectors banna oro 8,0 mm (Male) 5 pcs.
1 x Wing connector 8pin with pin strip, plug & socket
1 x 2 mm male connector (2 pcs) with safety connector
1 x XH female balance (2S) connector (2 pcs)
2 x 2 mm female connector (2 pcs) with safety connector
1 x Connectors banna oro 3 mm (M/F)
1 x XH female balance (5S) connector (2 pcs)
2 x Glases Moritz
1 x Glases Stratus
2 x XH male balance (3S) connector (2 pcs)
1 x BALSA trip 8.0x8.0x1000 mm
1 x Beech dowels 3.0 x 1000 mm
1 x Beech dowels 4.0 x 1000 mm
1 x Pine wood slat 10x10x1000 mm
3 x Mahogany wood slat 3.0x3.0x1000 mm
1 x Linden wood slat 2.0x2.0x1000 mm
3 x BALSA leading edge 8x10x1000 mm
2 x OBECHI sheet 2.0x3.0x1000 mm
1 x BALSA triangular 6x6x1000 mm
1 x Trailing edge BALSA 35x8x1000 mm
2 x Pine wood slat 6.0x6.0x1000 mm
1 x BALSA trip 2.0x10.0x1000 mm
1 x BALSA trip 3.0x3.0x1000 mm
1 x Liston HAYA 8 x 8 x 1000 mm
1 x Pine wood slat 3.0x10.0x1000 mm
2 x Walnut wood slat 3.0x3.0x1000 mm
1 x Liston HAYA 10 x 10 x 1000 mm
3 x BALSA trip 6.0x6.0x1000 mm
1 x Pine wood slat 1.5x3.0x1000 mm
2 x Beech dowels 2.0 x 1000 mm
3 x Pine wood slat 2.0x2.0x1000 mm
1 x B4-0 rocket charges (6 pcs)
1 x Blue smoke canister 140 g
1 x Soldering tip for KAVAN soldering iron KAV66.8338
1 x XT-60 Plug Mold
1 x Threaded coupler ALU Left M2,5 Ø 4 (2 uds)
1 x Aluminum Bayonet / strongal D12 mm / 0.5 m
1 x 10 mm self adhesive Pinking Tape, saw tooth height 0.5 mm
1 x 25 mm Sandpaper file
1 x 55% silver electrodes (2 pcs)
2 x 3 copper lacquer wire Ø0,2 mm (1 m)
1 x White silicone 0,25 qmm wire (150 m)
2 x 4 LiPo XH>EH adapter
1 x Silicone 0,25 qmm servos wire Graupner (5 m)
2 x 5 LiPo XH>EH adapter
1 x White silicone 0,25 qmm wire (100 m)
2 x 30 cm BEC cable (female)
2 x USBCOM 5i
1 x HBC 10035-3 32-Bit
1 x 120x60 mm SLH KOVO wheel
1 x Mahogany wood slat 2.0x2.0x1000 mm
2 x BALSA triangular 8x8x1000 mm
1 x Liston HAYA 3 x 10 x 1000 mm
1 x Nylon hinge for flaps 33x9 (2 pcs)
1 x Flap hinge (6 pcs)
1 x Long pinned hinge (6 uds)
1 x Fast'n EZ-CA-Hinge (12 uds)
1 x 22m Fitting barb
1 x Extra hard 750 ccm complete gasoline fuel tank
1 x 
1 x EXTREME FLIGHT BLUE MAGNETIC ROUND FILLER PLUG
1 x Extra hard 1500 ccm complete gasoline fuel tank
1 x Nylon hinge 15x0,3 (10 pcs)
1 x Deposito DUBRO 1800cc-60oz
1 x Indoor hinge with servo arm integraded
1 x Nylon hinge 20x20x0,3 (10 pcs)
1 x Double side nipple
1 x Black "FUEL VENT" round aluminum overflow socket
1 x Fast'n EZ-CA-Hinge, lite (12 uds)
1 x Long pinned hinge (12 uds)
1 x Bob airtrap set
1 x Deposito SECRAFT V2 1000 ml Gas
1 x 700 ml complete glow fuel tank
1 x XH male balance (5S) connector (2 pcs)
1 x Connectors banna oro 8,0 mm 5 pcs(Female)
1 x Zurich Sport Sunglasse Dark Sensity BROWN Glasses
1 x Connector CAN 15
1 x Wing conexion 2 servos JR/Graupner 50 cm
2 x XH male balance (4S) connector (2 pcs)
1 x XH LiPo extension lead
1 x BALSA trip 5.0x5.0x1000 mm
1 x A/C quality beech plywood 1520x750x4.0 mm
1 x Protector Connector MPX (1 pair)
1 x A/C quality beech plywood 600x300x5.0 mm
1 x PIN Connector female (100 pcs)
1 x XH male balance (6S) connector (2 pcs)
1 x Balsa panel 10x100x1000 mm
1 x BALSA trip 3.0x5.0x1000 mm
1 x Glases Aspen
1 x XT-60 connector (female)
1 x Connectors banna oro 3,5 mm (M/F)
1 x Banna gold connector 2,5 mm (100 M/F pairs)
1 x Charger FUTABA SQN30W12P-08 220v
1 x Neck strap Double V2
1 x Soldering PCBs 8pin, 5 pieces
1 x Connectors MPX black male
1 x A/C quality beech plywood 600x300x0.6 mm
1 x EC5-Set male, simple quality, 2 x female pin, 1 x blue housing
1 x Protector Connector Dean-T (1 pair)
1 x Connectors banna oro 6,0 mm (M/F)
1 x Glases Ace
1 x MR30 connector male
1 x MPX Support
1 x Glases Nimbus
1 x Balsa panel 2.0x100x1000 mm
1 x Connectors banna oro 8,0 mm (M/F)
1 x Beech dowels 10 mm x 1000 mm
1 x A/C quality beech plywood 600x300x5.0 mm
3 x Conector Servo female 4 pines
1 x Pine wood slat 3.0x5.0x1000 mm
1 x MPX Support (2 pcs)
1 x Balsa panel 8.0x100x1000 mm
1 x Conector JR/Uni Servo female BLUE silicon (10 pcs)
1 x XH male balance (9S) connector (2 pcs)
1 x 2,5x60 mm allen screwdriver
2 x 6,4x1000 mm 2:1 blue termoretract tube
1 x Set brocas Ø 1.2-1.4-1.6-1.8 mm (4 pcs)
1 x 12,7x1000 mm 2:1 green termoretract tube
1 x 37 mm PVC transparent battery termo-retract (1 m)
1 x Set fresas corte acero-carburo Ø 0.5/1.8 mm (2 pcs)
1 x Cabel charger battery transmiter Multiplex 2x0,5 qmm (50 cm)
1 x Balance "Y" Wire 5S, 2x JST-XH / 1x JST-EH
1 x Crimping tool
2 x Conector FUTABA Servo male BLUE silicon (10 pcs)
1 x Contacto macho pin conector (10 pcs)
1 x XT-90 connector (pair)
1 x XH female balance (8S) connector (2 pcs)
1 x 3,2x1000 mm 2:1 black termoretract tube
1 x 30 cm BEC cable (male)
1 x Steel brush wheel with 2.35mm
1 x 20 g tin paste
1 x Set brocas Ø 1.5-2.0-2.5-3.0 mm (4 pcs)
1 x 2 LiPo XH>EH adapter
1 x PVC red battery termo-retract 68 mm (10 m)
1 x 6,4x1000 mm 2:1 black termoretract tube
1 x 165 mm PVC transparent battery termo-retract 165 mm (1 m)
1 x PVC yellow transparent battery termo-retract 69 mm (10 m)
2 x 165 mm PVC transparent battery termo-retract 165 mm (10 m)
1 x Set fresas corte acero-carburo Ø 1.8/2.3 mm (2 pcs)
1 x Set brocas Ø 0.4-0.6-0.8-1.0 mm (4 pcs)
2 x 58 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 6,4x1000 mm 2:1 green termoretract tube
1 x PVC termo-retract battery 45 mm black transparent (1 m)
1 x 19 mm 2:1 black termoretract tube
1 x Red 3m5 mm connector holder
1 x Red 4 mm connector holder
1 x 3 LiPo XH>EH adapter
1 x PVC lilac battery termo-retract 70 mm (10 m)
1 x PVC transparent battery termo-retract 85 mm (1 m)
1 x Set cables carga (Mini-JST, JST, XT60, Dean, EC3, TRX, Micro-T,
1 x 2,4x1000 mm 2:1 green termoretract tube
1 x 135 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x PVC yellow battery termo-retract 69 mm (10 m)
1 x 68 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 2,4x1000 mm 2:1 black termoretract tube
1 x 4,8x1000 mm 2:1 blue termoretract tube
1 x Set fresas corte Vanadium Ø 2.3/2.35 mm (3 pcs)
1 x 105 mm PVC transparent battery termo-retract 68 mm (1 m)
1 x 6,4x1000 mm 2:1 red termoretract tube
1 x Conector XT-30 (hembra)
1 x Balance "Y" Wire 7S, 2x JST-XH / 1x JST-EH
1 x Black spiral protective cover for wires Ø 0,5/50 mm - 25 m
1 x Cabel "Y" 30 cm (graupner)
1 x Black silicone 0,25 mm² wire (25 m)
1 x Cabel charger battery transmiter Graupner 2x0,5 qmm (50 cm)
1 x Conector JR Servo female (10 pcs)
1 x Connector Sub-D 2+5 Male
1 x Cable silicona female batt. receptor 30 cm (Futaba)
1 x Conector BEC female (10 pcs)
1 x Black copper lacquer wire Ø0,2 mm (5 m)
1 x Circlick securite
2 x Conector FUTABA Servo female (10 pcs)
1 x Servo Robbe FS 128 BB MG HV Digital
1 x Blue aluminium servo arm V2-Hitec 1,25 inch M3
1 x Gold aluminium double servo arm V3-JR 3.5 inch M3
1 x Red aluminium servo arm V1-Futaba 15 mm iM2
1 x FESTO connector M7 Quick 6mm 90º
1 x FESTO connector 1/8 Quick 6mm 90º
1 x Motor A30-12 XL Glider
1 x Electric Landing Gear "Black Edition" ULTIMATUM 3.0 (Elektron Re
1 x Motor B20-10 L + 4:1 gearbox
1 x CC 11 Conector
1 x SUPER STRANGTH SERVO ARMS FUTABA LONG (8 PCS)
1 x Red aluminium servo arm V2-Futaba 17 mm iM2
1 x Red aluminium servo arm V2-Futaba 1,0" inch M3
1 x Gold aluminium servo arm V2-JR 1,5" inch M3
1 x Blue Aluminium double servo arm V3-Hitec 3-3,5inch
1 x Red aluminium servo arm V2-Futaba 1,5" inch M3
1 x Servo DITEX EL0510M
1 x Blue aluminium servo arm V1-Hitec 1,5" inch M3
1 x Blue aluminium servo arm V2-Hitec 2,0 inch M3
1 x Servo arm with 6 mm hole to FEMA 9800A
1 x Refueling Cap V3 Red
1 x Connectors MPX male
1 x Tarjeta programadora RAY G2
1 x ESC RAY G2 R-60SB SBEC
1 x Conector MR-60 (pareja)
1 x Mounting frame MPX female connector
1 x 25x14 4Bl Scale
1 x Vess propeller 11x7 S
1 x Connectors banna oro 0,8 mm (M/F)
1 x PHASOR RACE 2035/4100 1D
1 x JP Hobby ER-120 Tricycle FELIX JR
1 x FESTO Blanking plug G1/8
1 x Quick hose connector 3-3 mm
1 x Motor A200-6
1 x Motor A50-10L Turnado V3 Glider
1 x Motor A30-14 L V4
1 x Shaft for A60-XS-V2 (112,5mm)
1 x VM 2020/20 rear
2 x QS Bulkhead Valve 6/6 mm
1 x Motor A40-10S V4 14-Pole
1 x Adpater for mounting VMKG gearbox in 480 motor
1 x Motor A40-14 L 14-Pole V4
1 x Motor A20-26 M EVO
1 x QS Bulkhead Valve 4/4 mm
1 x AXI 2826/10 V2
1 x Tren electrico JP ER200 F-16 1:6 TOPRC
1 x Foam wheel Ø 351 mm (2 pcs)
1 x AXI 2808/20 V2
1 x Tygon tube 6.35 - 3.18 mm 1m
1 x Refueling Cap V3 Black
1 x Quick hose connector 3-3 mm
1 x Tygon tube 6.35 x 3.18 mm 15 m
1 x TYGON tubo 15 m Diam. 3.4 x 2.0 mm
1 x Connectors MPX male (PIN double)
1 x MZ-18, 9 Channel HoTT
1 x Coupling bush 5 - 5 mm
1 x POLARON EX 800w charger
1 x Connectors banna gold 5,5 mm (M/F)
11,621.69EUR
Manufacturers
Languages
Español English
Currencies